Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

One of my father's friends recently past away, and left his widow with this truck. He was the original owner. As I am told, it is a 1-ton single rear wheel.
Pops asked me if I would be interested in a truck with a great engine. I said "Sure, I'll buy it", without looking at the truck. The story was that it has a fresh rebuilt BBC with 500hp, $5k invested in the motor. They guy ran a Kragen Autoparts store, so how could I go wrong?
http://i4.photobucket.com/albums/y13...zMjMtMTgwM.jpg
http://i4.photobucket.com/albums/y13...EyMDUtMT-1.jpg
http://i4.photobucket.com/albums/y13...yMDUtMTUyM.jpg

I should have known my life better than that. I brought it home in February, after pouring 4 quarts of tranny fluid in the TH400. When I got home, I pulled the intake manifold and valve covers for a look. Beneath the rattlecan orange, I found ProComp aluminum heads and roller everything. I also found a missing pushrod, and 2 loose pushrods. The alternator and power steering pump were crooked, and everything but the heads used the original bolts from the original engine. The headers wouldn't cover the exhaust ports either (1 3/4 primaries)

I bought new pushrods, and lifters, stainles allen heads, headers, brackets, and have been working on it ever since. I have yet to find a billet power steeering bracket that fits. I am having one custom milled by a local custom shop. The billet passenger alternator bracket is from Black Mountain Precision. Nice piece.
http://i4.photobucket.com/albums/y13...yMDUtMTQ1N.jpg

Plans for the truck are to make a "nice work truck". Slightly custom, not show quality, but still haul stuff around. The body will be shaved, seam in the LH bed welded, no badges, single side window. The TH400 shifts good n hard; maybe a rebuild. Engine seems good, and roasted the tires a good 20 ft on 6 cylinders and a locker diff. The dash will be welded up smooth, modern guages, new wiring. The list goes on...

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Looks like you are making good progress! That'll make a nice heavy duty work truck.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Howdy neighbor! Looks like you got a good start there. Isn't it funny how just about every truck you come up on has the owner claiming the motor is fresh, rebuilt and lots o' horsepower? It's even funnier that none of them have receipts, dyno sheet, etc to back it up.
Good luck with your project.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Longhorns rock! 1404 C/30 longhorns were built in 70... all of them were single rear wheel for the record.
Looks like you have a solid platform to start with there.
Question... whats wrong with using original bolts? Head bolts and internal parts need new bolts... but intakes, tin, water pump.... all that jazz, original bolts are perfectly finr.

I would leave the seam on the bed personally... I call that the longhorn line personally. If you leave it there, you'll have something there to point out to people when you are telling them how rare it is. If you fill it in, then when you tell people, they'll say "it looks like a normal longbed to me".
Do you have any photos of the SPID? I see some nice options there, Custom Camper, A/C, Custom Trim, guages, 396/TH400... what else is listed on that sucker?

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

nice project! If you ill the bed seam you`ll have to carry a tape to show how much longer it is when people ask,instaed of pointing tio the seam.I call it the reference mark.:cool:

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

LONGHORNS RULE!!!!!!.....period

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

God hates me. I got a CPP steel underbed tank and coated it with duplicolor undercoating to protect it yesterday. It is hanging from a tree in the backyard to harden.

Last night and today......rain.....

[cursing smiley here]

Neighbor? Excellent. Perhaps a few weekends of beer and exchanging expertise? I'm sure you could use a set of extra hands, as could I. We can always use beer. Reassuring to know that I am not the only local with the mile-long-bed-truck.

I do know for a fact that this is a fresh rebuild. I have seen it in the guys garage over the past 3 years being assembled. All the parts are immaculate. I attribute the loose pushrods to misalligned rockers and sitting for over a year. Peeks into the plug holes reveal shiny pistons with tall tops.
The motor has less than 50 miles on it. I believe sitting allowed the lifters to drain. My bad, I should have primed the oil system prior to starting. The missing rod turned up in the oil pan. All is replaced now, with a generous helping of assembly lube.
The old motor is still sitting on the guy's toy hauler.


Original bots - they were rusty....very rusty. If I am not mistaken, modern alloys are stronger and less porous. Use of stainless fasteners in the aluminum parts, with antiseize, will keep the threads in top shape, provide accurate torqueing, less likely to shear a head, and are compatible metals.

SPID? Not sure what that is, but I would be happy to take more photos for you to apply that Chevy wisdom.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

SPID is the options list located on the inside of the glovebox door.

Nice find.. I wish I'd find some nice aluminum heads under some chevy orange paint.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Thanks to 19GMC63"s Photoshop skills, here's a pretty good idea of my goal. The tank filler will also be shaved, but that's a minor detail.

Any thoughts?

http://i4.photobucket.com/albums/y13...rgd_notrim.jpg

I am a Suzuki fan, so I'm shooting for something to compliment the TL1000R.
http://i4.photobucket.com/albums/y13...gd82/tlr-1.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

As instructed, here's the "SPID".
http://i4.photobucket.com/albums/y13...yMjQtMDcxN.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Flip the colors; yellow on bottom, flat black on top.
Or bring the red stripe down to where the upper trim would be.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

hey from N.C. nice truck :metal:

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Been waiting for over a year for these.

http://i4.photobucket.com/albums/y13...jA1NC5qcGc.jpg

http://i4.photobucket.com/albums/y13...TA0MC5qcGc.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Thats a solid looking Longhorn ! I likey :metal:

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

I agree, flipping the colors would look awesome! Nice project I'll be watching this one. The more trucks I see, the more I want this and want that... A big block would be awesome and isn't embarrassing the way my stock 307 seems. What is about men and bigger = better? I don't know, but count me in.

Paul
Posted via Mobile Device

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

If the truck had A/C, I would consider the black on top. Southern California is home, and the sun will turn a black roof into an oven, particularly with the sliding rear window coming out.

I'll likely bring the yellow down further to the line by the door handles. Maybe silver rather than yellow.

First priority is to get her running again. She's been sitting for over a year. I gotta re-wire the alternator to the right side, and put in the under-bed tank to get her to the shop for a tranny rebuild and new exhaust.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Started back in on 'er

http://i4.photobucket.com/albums/y13...ps87e3d6b1.jpg[/URL]

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Wow talk about a sleeper. Sweet truck man and the motor looks very nice. Your already half way there no need to put a different motor in.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

The ol' truck is at the shop getting the motor running. From what I know about the truck:

468ci BBC short deck

MSD HEI

Edelbrock dual plane air gap manifold

Pro Comp alum heads with huge ports (had to get 2" primary headers to cover exhaust ports)

Comp Cams hyd installed #'s: 224 duration, lobe lift .301, lobe sep 110

Holley 4150-9381 830cfm

Roller rockers

Large sump pan

What kind of hp should I expect? Sound like a good carb?

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Aluminum radiator (ECP) and aluminum under-bed 20 gal (CPP) tank received in the mail! Slow and steady progress....


http://www.speedcooling.com/about/info_1.html

http://www.classicperform.com/

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Ol' Suprachrgd82 is very excited. The big truck finally runs! I found a great shop (Abel and Sons, Whittier) and they got 'er going. Johnny at Abel and Sons is a genius.

I had to get 2" primary headers and a new mini starter to clear the headers. The aluminum radiator, rear CPP tank and 830 Holley are in, and it sounds awesome!

I have a Dynomax X pipe and Thrush turbo mufflers in 3" to be installed next week.

The shop s literally nextdoor to http://www.onepieceproducts.com/ , so the next stop will be to have single side windows and front & rear flushmount glass put in. They just finished another Longhorn, pic below. Imagine seeing 2 Longhorns in one spot.

I just ordered up all new exterior lights in LEDs, and body panels that need replacement. Classic Industries has a decent Labor Day promo.

Next, to order wheels and tires. I'm leaning toward the wheels below in 8-lug 18" front, 16" rear. Any suggestions?


Classis Industries order:
http://i4.photobucket.com/albums/y13...psta2dc3tq.png

Another Longhorn at the window shop:
http://i4.photobucket.com/albums/y13...psmmwlzufy.jpg

Wheels at the top of my list:
http://i4.photobucket.com/albums/y13...pscumpvyi3.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

ya and they just cant drop the price because it has all that work

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

If I understand things correctly around here the bike should end up looking something like the truck!:chevy:

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Why not just go 18s all around? And in cases of staggered sizes I've always seen a bigger wheel in the back, never vise versa. What are your plans for the suspension and tire size?

http://i4.photobucket.com/albums/y13...pseeevvpwa.jpg
Posted via Mobile Device

http://www.performancetrucks.net/for...s-dsc01496.jpg
Posted via Mobile Device

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

New master cyl is on the way
http://i4.photobucket.com/albums/y13...pswfi292gg.jpg

Exhaust will be put on next week - Hedman 2" primaries dumping into 3" with an X and Thrush turbo mufflers
http://i4.photobucket.com/albums/y13...pseeevvpwa.jpg

Tank is in
http://i4.photobucket.com/albums/y13...ps8fhdeabf.jpg

To the best of my knowledge, this is an Eaton rear. Disk conversion is visible by the wheel. Does anyone make a cast heatsink cover?
http://i4.photobucket.com/albums/y13...psjymlxpuw.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

The only reason the front wheel is bigger on this truck is they have slicks bolted up for the pic, with a different wheel altogether.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Exactly

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Classic Industmries order arrived today:

http://i4.photobucket.com/albums/y13...pssqyv2ypt.jpg

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Oooohhh parts. What is it, what is it!

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

16" rear wheel housings from Classic Industries and a pine wood bed kit from Mark are ordered.

Now to find a shaved door handle opener thingy kit.....

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Nice to see you back on the truck! Do you have a vid of the beast yet? I don't think anyone has a cast rear housing cover available for the eaton rear. I'm sure someone could make one though.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Damn cool truck,always wanted a long horn but they are super rare where I live. I look forward to watching this build

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Wound up getting this:
http://i4.photobucket.com/albums/y13...ps9cimkhet.png

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Very nice!

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Mind me asking, where did you happen to find that diff cover? Best to my knowledge and research nobody really makes anything for our Eaton.

Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project
 

Sorry, mate, I think I got the last one from their latest production run. Keep watching them and another will likely pop up.
http://i4.photobucket.com/albums/y13...psugzftjqw.png