C60 nose job on a square body?
I'm building a shop truck with a flat bed. Probably a big block, geared to tow a house. I want a big 4WD truck but it's also 99% a street truck. I'd like large tires and wheels, like from a semi and a body lift to make them fit. I also want to build a big custom push bumper.
I believe I have just described a C60. :lol: So why not get one I started thinking? Well, I want a '73/74 pickup cab anyway, so I don't have to deal with the emissions nazis. But, I'm also starting to think insurance and registration on a "C10" cost a lot less than a "C60". ;) Somewhere I read about putting a C60 front clip onto a "light duty" truck. Does anybody know anymore info about this? I understand the light duty/heavy duty cabs are not exactly the same even though the dash and doors are. Did they all come with the flip open nose or was that just an option? Also, I'm just curious, did Chevy ever produce the C60 (or others in the size range) in 4WD in the 70s/80s? (K60?) |
Re: C60 nose job on a square body?
I've seen them with 4x4 front ends. They're usually off road utility trucks or fire engines. I don't think that they were actually considered K60 or K65 though. The fiberglass tilt hood was an option beginning in the mid-70s, but were more common in the 80's. Registration and insurance would depend partly on what kind of plates you would be running.
Putting a C60 doghouse onto a light duty pickup would be quite a chore. First off the front axle on a pickup is narrower than on medium duty trucks, so your wheel openings would look strange with the tires way back inside them. Then you'd have to address the fact that the medium duty trucks have a shorter hood than pickup trucks do. |
Re: C60 nose job on a square body?
This one was on craigs list not too long ago. Don't know if he ever sold it but it's a C-60 on a C-30 basically. He did use a newer C-60 bed if I recall.
http://i957.photobucket.com/albums/a...a/chevy101.jpg It can be done.;) Mark:chevy: |
Re: C60 nose job on a square body?
I'm glad you posted that pic, I was wondering how low that would put the fenders and steps.
|
Re: C60 nose job on a square body?
Quote:
So if I'm able to locate a 70s C60 front end it would probably be steel, and not fiberglass? |
Re: C60 nose job on a square body?
Steel;American made.
Mark:chevy: |
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
1 Attachment(s)
I've been looking hard at these old military pull trucks...see what I mean about the fenders blending with the low bumper and step? (this one doesn't)
|
Re: C60 nose job on a square body?
Years ago I had a 58 retired grain truck, 1.5 ton GMC. While this one here is advertised as a 2-ton, back then the style was without fender flares but filled in the space appropriately. The step was located inside the door.
http://i957.photobucket.com/albums/a...america/59.jpg Just another example to think about along body lines. I like your ideas but you are correct in thinking a regular light duty cab probably won't look proportionate to what you're considering. Good Luck! Mark:chevy: |
Re: C60 nose job on a square body?
C60's are quite different. The cab sits higher on the frame, if you have the fiberglass (actually SMC) tilt nose the cowl is different (for the lower fender quarters) and the firewall recessed more. They sit on C channel frames with no kick up.
The basic cab pieces interchange (doors, rockers, etc). Someone here, stump maybe? grafted a Burb body onto a C60/65, if I remember right there was like a 4" height difference in the floor at the joint. Mihgt search on c65 crew and see if you can find it. |
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
2 Attachment(s)
Major outer differences in firberglass tilt hoods vs. conventional. The orange C70 has the tilt hood, and has a small fender that fills the space between the edge of the hood and the door. The green C60 has the conventional steel hood which consists of the hood, a small lower fender on each side that stop just below the arch of the fender, and the fenderwell radiator support assembly. The fenders have seams in the front, but I think that the fenders, lower panel, and radiator support are considered to be one-piece. You might be able to dissassemble those parts I don't know. BTW that is factory paint on the orange truck.
|
Re: C60 nose job on a square body?
Tha door line matchs up ...
|
Re: C60 nose job on a square body?
2 Attachment(s)
What if I took the section outlined here in black, and applied it to a 73-80 fender? It would probably be easier to find the fiberglass C60 fender section rust free than the steel version. ;) Maybe they would be easier to blend if I started with a standard 73-80 fiberglass fender? I would probably need a custom tilt nose just to work on the thing...
How much longer is the fender on the little truck vs the big truck? |
Re: C60 nose job on a square body?
By the way - can I get wheels like on that orange C60 for an 8 lug axle?
|
Re: C60 nose job on a square body?
Quote:
My neighbors have a big late model International 4x4 truck with a service bed for a shop truck...I've got to out do them. I've been challenged to a truck tug of war. :smoke: |
Re: C60 nose job on a square body?
don't do it man! it looks nice enough as is..... :)
|
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
Quote:
|
Re: C60 nose job on a square body?
Quote:
What about aftermarket fenders designed specifically for big tires, does anybody make 'em? I know they make them for smaller trucks...not sure if there would be much of a market for that on square bodies though. Body work isn't really my thing. :lol: |
Re: C60 nose job on a square body?
i've been thinking about putting a medium duty front clip on for a long time because i wanted easy access to the engine. But i probably won't do it because i've got my engine tuned pretty dependable now and if i need close access/attention to it i can just take it out in probably under 4 hours.
Anyways, i stumbled upon this video yesterday while looking for something completely unrelated: So this proves it can be done. However, i still feel, for what you are wanting to do, that simply getting a nice 6500/7500 would be less hassle. Register in another state if Or regulations are too stringent? |
Re: C60 nose job on a square body?
P.S. i dig the idea of sectioning out part of the medium duty's fender and grafting it onto the pickups. Except why not remove the pickup's fenders completely and cut a little higher on the med duty's so as to match the contour and shape of the pickup fenders?
|
Re: C60 nose job on a square body?
I always wondered what a pickup would look like with a medium duty grille and headlights in place of the original setup.
|
Re: C60 nose job on a square body?
Quote:
Did they ever make one of those trucks less than 10k GVW factory? There's a big warehouse building around the corner from my shop that always has '70s medium duty Chevys torn up and peiced together sitting around, I think I'm going to go ask them what they do there? They seem to have front clips laying around on a regular basis. I'm not sure if that's just personal stuff or they work on 'em...they don't have a sign or anything. :lol: |
Re: C60 nose job on a square body?
It's unlikely you'll find one that has a GVW rating of anything less than 26k. In KY you have to have a CDL to operate a straight truck if it has either A: a GVW of 26,001 or more, or B: air brakes. As far as registration, we run the same plates on grain trucks that we do on pickups (farm plates).
|
Re: C60 nose job on a square body?
Go to www.bigasstrux.com
|
All times are GMT -4. The time now is 12:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com