Parting out 1970 GMC C10 350,TH350, 3.73
 

Hey guys, Here's a 1970 GMC C10 that I will be parting this out down to the bare frame. I will be dismantling this very soon. I will list and price parts as soon as I can. See something you like let me know. Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

More pics

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I like the WHOLE DARN THING!!! Why you parting it? It looks like a nice truck.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Interested in...Thanks..

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Tha ks
Posted via Mobile Device

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Is this a parts board or a "fishing" derby. Come on guys, let's play by the rules! Sharpie

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Well....bad engine, rusted rockers, bad master cly. and little issues.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Hmmm...did I break a board rule by listing this??

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Who's not playing by the rules? I'm confused? Happens a lot to me. Lol
Btw sharpie I never got Paypal bill for the body plugs, did you sell them to someone else? Let me know.
Posted via Mobile Device

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Interested ... to 93250. Thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

If you are parting this truck you need to list the parts and a price for each part when you post that you are parting it out.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Parts need to be priced...

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

sorry guys! prices forth coming.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Looks like a buildable truck for sure. There just aren't very many GMCs that survived either. Seems like a shame. I'm wondering if these full part outs make any money. I know it re-distributes parts to guys that will more than likely put back on the road, but it also takes one whole truck off the road for good. I have killed a few trucks in my time too. Anyway, good luck with your parting.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'd be interested in all of the pulleys, brackets, and water pump from the front of the motor so I can change my motor over from lonmg wp to short wp.
Pending price, pictures, and shipping.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

All prices are plus shipping. I will ship anything listed. Hot tanking and acid dipping available. Hope to have this truck fully dismantled this weekend. Pics to follow. Combined shipping no problem. Package deal prices ok (pending board rules). Thanks, Tom

Front bumper driver only scrapped ------------------ LH taillamp bezel minor ding outside edge 10.00
Grill not perfect but nice driver 150.00 SOLD local------------------ LH upper tailgate trim nice driver no dings 15.00
head lamp bezel RH nice 20.00------------- Center tailgate molding minor pits 15.00
headlamp bezel LH nice 20.00------------- LH eyebrow ding at very bottom not rusted 10.00
RH turn lens 15.00 ------------------- TH350 slip yoke 25.00
LH turn lens 15.00
core support - rusted out and scrapped
RH fender bare 175.00
LH fender bare 175.00
Box random dings surface rust 400.00
cab low hump typical rocker cancer bare 250.00
Hood hindge LH tight and works nice 20.00
LH door shell, solid 150.00 SOLD local
tailgate many minor dings inside,no bow, 3hrs outside SOLD local
LH inner fender - no ship to ruff
mirrors pair only 50.00 original?? ***moved to it's own tread***
Seat nice recover cloth with original center panels 225.00 SOLD locally
seat belts complete 75.00 ***moved to it's owm thread*** SOLD
LH door panel so so driver 20.00
RH door panel junk
arm rest pair 20.00 SOLD
sun visors some stiching coming loose otherwise nice 15.00 each SOLD
heater control missing top lever nice bright finish face and rear bracket are solid 20.00
LH chrome vent assy clear glass 35.00 SOLD
RH chrome vent assy clear glass 35.00 SOLD
LH door latch 25.00 SOLD
RH door latch 25.00 SOLD
LH window reg. 20.00 SOLD
RH window reg. 20.00 SOLD
LH outside door handle 15.00 SOLD
RH outside door handle 15.00 SOLD
rear slider window 45.00 SOLD
AM Radio minor pitting pic makes it look worse than it is 50.00 ***moved to it's own thread***
speedo cluster basic with gauges 25.00 less bezel
steering column at NOT tilt 75.00
under dash wiring nice 50.00 SOLD
power brake booster complete works good 75.00 SOLD
4 core rad brackets all 4 pieces 35.00 SOLD
fan shroud minnor blemish on top 40.00 SOLD
new HEI just installed, didn't cure bent valves, 75.00
alt brackets 20.00 SOLD
water pump pulley 2 groove 10.00 SOLD
crank pulley single groove 10.00
short water pump 10.00
power steering pump, gear, hoses, crank pulley complete change over 150.00 ***moved to it's own thread*** SOLD
carb pre heat tube and sheild on LH manifold, acid diped and glass beaded nice piece 65.00 ***moved to it's own thread*** SOLD
air cleaner with spacer and hose 45.00 *** moved to it's own thread***
engine wiring harness junk
fan blade clutch type 20.00
fan clutch - on hold
shift linkage complete 40.00 SOLD
transmission cross member 40.00
sb engine stands 35.00
firewall side heater housing 25.00
3.73 NL leaf spring rear end 225.00 SOLD
TH350 6" tail works fine been rebuilt 200.00
front sway bar with all brackets 65.00 SOLD
forward spring hanger brackets R & L 40.00
All misc parts will be gathered, pictured and priced after disassembly.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

are the front leaf spring hangers off the rear end any good?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Shipping quote on front bumper to 32571 please.
Posted via Mobile Device

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

tll74: Nice follow up on pricing! Sharpie

jmedero: still have the plugs for you. Will PM Paypal info. for the third time. Please PM or respond in the original thread the next time you have a question so we don't clutter someone elses thread. Sharpie

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'm interested in the rear end and sway bar and maybe a few other items. Pm sent

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I am looking for a set of transmission lines. How much plus shipping to zip 32136? Thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Im interested in the rear sliding window.. Pending shipping quote to 92801. PM sent

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Interested in front bumper and front fender eyebrows price pending shipping and condition. Shipping to NV 89040 Thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Fan shroud shipped to 05478.

What are you looking to get for the hubcaps?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Yes they are. They are now on the list @ 40.00 plus 12.50 shipping.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

interested in he tailgate upper and lower trim as well as the tail light mouldings pending pics to 93013
thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I have listed and priced all the pieces you asked about. Did you need a p/s pump and p/s (crank) pulley as well? If so I have an extra for 65.00. So...120.00 plus 25.00 shipping to FL for the following:
upper pulley
lower pulley
p/s crank pulley
alt brackets
p/s pump complete
all original bolts to mount

Pics coming soon.

Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Will you be keeping the frame? I need the rear most crossmember.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

projectjimmy68: the lines are shot, sorry

Cisco714: shipping to 92801 26.00

Rochlow: shipping to 30196 19.00, hub caps are decent driver qaulity 30.00
plus 10.00 shipping

Tommy454: mirror pics as requested the mirror heads are not exact matches but very close. You have to look hard to see the difference.

jmedero: shipping to 32571 47.50, this a driver qaulity only.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'll sell any part or portion of the frame. That cross member 35.00 plus 17.00 shipping to FL.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

$25 + shipping. Are you able to take a pic of it yet

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

more pics as requested

mo: LH tail lamp trim nice driver minor ding on outside edge. 10.00 plus, LH upper tailgate nice driver no dings 15.00. RH upper dented free with something else, center piece minor pits from age. 15.00 plus. lower trim dented LH side. 5.00 plus

gm71jimmy: RH eyebrow looks nice other than some surface rust the LH has a dent down low and surface rust. Would clean up for a driver only, RH 15.00
LH 10.00 plus. Shipping on bumper 35.00 to NV. could include the eyebrows with the bumper.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Are you offering 25.00?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Short water pump change over pics for FL71C10.

Fan shroud pic for Rochlow.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I was, but, I'll wait. I don't want you to go to the trouble of pulling it apart. If you get that far in the course of parting it out, get a better look at it and put some pics up. Shoot me a PM to let you know you put the pics up. Don't hold it for me if you get an offer on the whole frame, though. Thanx!

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Can i get better pics of the Power Booster? Is it in good condition? How much shipped to 75236?

Re: Parting out 1970 GMC C10 350,TH350, 3.73