73-91 C-10 Flush Fit Back Glass
 

:fb: Hey guys!!
We've been doing some pretty cool things here. Here is one of the last releases we did on this truck body. We stumbled a little upon release but got it smoothed out. Glass will come in Privacy and original green tint. Let us know what you think?

Re: 7391 C-10 Flush Fit Back Glass
 

I think its sexy! Looks like an awesome compliment to the one piece side windows. If only we could get a flush fit windshield too...

Re: 7391 C-10 Flush Fit Back Glass
 

How does this affect the trim for the headliner above the back window. I noticed the grey reck didn't have trim inside above the window. And what's turn around time on this product. Is there a price break if I order the back glass and the one piece windows?

Do y'all have a flush windshield in the works and if so when is that coming out?

Re: 7391 C-10 Flush Fit Back Glass
 

The flush windshield is in the works but is running slow cause of manufacturing. We are trying to keep it here in the U.S.
We do offer a price break when both kits are ordered together. 5%off
The back glass is offered in privacy and green like the side glass. Both are in stock and we just received the clipped on Scrapers for easy install.

Re: 7391 C-10 Flush Fit Back Glass
 

Do you have everything in stock, like the brackets, and can ship them out today?
Posted via Mobile Device

Re: 7391 C-10 Flush Fit Back Glass
 

And what about the headliner trim. Does it still go back into place like it should and is there a gap or not
Posted via Mobile Device

Re: 7391 C-10 Flush Fit Back Glass
 

Sorry, forgot about your headliner question. The trim on the inside covers the gap caused between the glass and the pinchweld. It kinda looks like a door seal with a special profile. The one in the picture was our first version of the trim and now looks like it belongs. It has the same type of inner lip like the original gasket. So there is no problem for headliner applications.
Hope this helps.

Re: 7391 C-10 Flush Fit Back Glass
 

Ben, Jeff Drew here. I got the roller tracks for the upgrade, but you never responded about the clip on scrapers I e-mailed you about. Can you sell those too and how much for them?

Re: 7391 C-10 Flush Fit Back Glass
 

Looks cool and subtle!
How much do they cost and what about shipping to Germany?
Volker

Re: 7391 C-10 Flush Fit Back Glass
 

Hey Jeff.
I haven't responded cause the new style scrapers just came in Yesterday and we are shipping out all the back ordered ones. We will sell them for $75 + shipping which can be between $15-$25. If you still want the new style just give us a call.

Re: 7391 C-10 Flush Fit Back Glass
 

The back glass or 1pc side glass? I would need an address to quote it.

Re: 7391 C-10 Flush Fit Back Glass
 

Here is a video of the back glass install (Step 1). (Step 3)

Re: 7391 C-10 Flush Fit Back Glass
 

That is freaking sweet. How much is it?
Posted via Mobile Device

Re: 7391 C-10 Flush Fit Back Glass
 

They start at $245 and $20 more for privacy. Includes the glue for the install and the inner trim that goes in place of the original rubber.

Re: 7391 C-10 Flush Fit Back Glass
 

Hmm... Wonder how that would look on my truck?

How long does it take for you to ship them out? I'm in GA, 30011.

Re: 7391 C-10 Flush Fit Back Glass
 

Back Glass Flush kits are in stock, We can ship the next day.

Re: 7391 C-10 Flush Fit Back Glass
 

ohhh man thats SLICK!

Re: 7391 C-10 Flush Fit Back Glass
 

That's badass!

Re: 7391 C-10 Flush Fit Back Glass
 

How well does this sealer hold the glass in place ?

I mean, The door windows are only inches away so there's gotta be a greater wind force on this flat mounted glass as opposed to a longer passenger car with a slanted rear glass.

Thanks

Re: 7391 C-10 Flush Fit Back Glass
 

If you are speaking of the back glass, we send the urethane out with the kit, and its all in the location of where you shot the glue. You can reference the video that's linked. I don't think I understand your door window question, but the door glass is completely seperate from the back glass and holds no compromise. As far as windforce, the urethane glue we use has a tensile strength above 1100psi when fully cured.
thanks for your question!

Re: 7391 C-10 Flush Fit Back Glass
 

That answered my question/concern, Windforce from open door windows blowing the back glass out....

Thanks

Re: 73-91 C-10 Flush Fit Back Glass
 

This would look really good with: http://www.onepieceproducts.com/Prod...ductid=OPP7391

Re: 73-91 C-10 Flush Fit Back Glass
 

I've got mine already....haven't installed yet but it looks sweet....thanks, Ben

Re: 73-91 C-10 Flush Fit Back Glass
 

SWEEEEETTTTTTTT. I need to start saving some coin now

Re: 73-91 C-10 Flush Fit Back Glass
 

I like it. Wish I could afford the side windows... Installed mine last weekend. Only issue I had was due to my painter. He never removed my back window, so the original under the gasket showed. Nothing a little touch up did not fix.
Other recomendations are to warm that glue and wipe the glue off while it is wet like he says in the video. I figured it would be a mess and would just cut it out, but doing so took off some of the paint and it all does not come off easy...

http://i1220.photobucket.com/albums/...sh_window5.jpg

gasket

http://i1220.photobucket.com/albums/...sh_window3.jpg

Re: 73-91 C-10 Flush Fit Back Glass
 

This one's definitely going on my project!!! Already sent the information to my shop! Sure wish they'd come up with a front glass kit too...

Re: 73-91 C-10 Flush Fit Back Glass
 

We already have the pattern made for both the 67-72 and the 73-91 C-10s. We are trying to keep production here in the US, but find it difficult to keep cost down. We have sources outside the US but we don't want to deal with the issues caused by shipping into the US, but price will be very reasonable. Just keep posted.

Re: 73-91 C-10 Flush Fit Back Glass
 

Where those Foose wheels you running? and what size? I really like the way it sits!!

Re: 73-91 C-10 Flush Fit Back Glass
 

Billet Specialties rims 22x10 on the rear and 22x8.5 up front

Re: 73-91 C-10 Flush Fit Back Glass
 

Yep, the good 'ol government has made it VERY hard for small businesses to succeed due to cheaper products & services from abroad - it's truly a shame!!! Just rest assured - if you make a flush mount front glass kit for these trucks, people WILL buy them & I will be one of the first!!! Keep doing what you do guys - we all appreciate your efforts for the custom truck world!

Re: 73-91 C-10 Flush Fit Back Glass
 

I noticed that your crew cab hes the one peice front glass also. Are you planning on making the one peice for the rear doors as well?

Re: 73-91 C-10 Flush Fit Back Glass
 

Also interested.

Re: 73-91 C-10 Flush Fit Back Glass
 

How well would this glass handle with the constant vibration from subwoofers?? Would it stay in place or is there a chance of it coming off

Re: 73-91 C-10 Flush Fit Back Glass
 

It's glued in the same way all late model front & rear glass is so I would imagine it would do just as good. Just my thoughts.

Re: 73-91 C-10 Flush Fit Back Glass
 

x2 That black glue they use is pretty strong stuff....:smoke:

Re: 73-91 C-10 Flush Fit Back Glass
 

ya, dont think the subs stand a chance :D

Re: 73-91 C-10 Flush Fit Back Glass
 

and messy!!!!

Re: 73-91 C-10 Flush Fit Back Glass
 

How dark is the privacy glass? I'm wondering if I want privacy glass, or just get clear and have it tinted like the side windows?

Re: 73-91 C-10 Flush Fit Back Glass
 

i voted dislike. looks to modern.

Re: 73-91 C-10 Flush Fit Back Glass
 

now when you lock yourself out of your truck theres no climbing in threw the back sliding window now lol