The cerveza & taco build (70 Burban)
Let me kick this off as a build it and run it thread ... no big buck build .. just a family cruiser ... :ito: So if u got some time take a look ..
350 engine rebuilt .. backyard stylee.. some light sanding and some honing and bam back togather with new rings & bearings 350th off craigs - was rebuilt thats what the guy said? who knows we will find out ghetto bags and crappy work done all around the previous owners:waah: now i got to learn to post some pictures:uhmk: |
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
neat project. ugly air set up with clamps covered in electrical tape but the worse part of all was no tacos or cervezas as promised.
|
Re: The cerveza & taco build (70 Burban)
:agree: must have tacos:D Boy that air setup looked scary....I was gonna ask what that darn yellow coiled up hose was....whew...now I know!!!...YIKES!!!
|
Re: The cerveza & taco build (70 Burban)
hey thanks 4 the thumbs up ... but yeah ,lacking the tacos and beer ...
lets start off with the mickey mouse work that has been done, Well by ... mickey mouse , mini and goofy .. 1. Knocking motor 2. front seal complete gone on trans , dropping about 1 quart when it was parked 3 steering so loose it was fun to drive ... Now we get to the band aids compressor for the ghetto bags just tossed in the truck with tape wraped up to protect hot ends! ( on post 3#) steering wheel bolts stripped.. i think i can save the column (3#) tearing down the motor i figured these guys made no effort in doing anything right.. hoses shoved into other hoses, then taped , then clamped. (post 4#) SMC air valves zip tied like mad ... to shift linkage !! and on anything else they could zip tie it to... Just to name a few but ... wow!! no cotter pins !!! (post 6#) |
Re: The cerveza & taco build (70 Burban)
i did the wheels ,reminds me of my 20inch centerlines
|
Re: The cerveza & taco build (70 Burban)
|
Re: The cerveza & taco build (70 Burban)
:haha: that's what we're talking about!!!!
|
Re: The cerveza & taco build (70 Burban)
Great, now I am hungry... :lol:
|
Re: The cerveza & taco build (70 Burban)
just dumped in my motor and trans ... having a b@#$ of a time putting in motor mount bolts!!
|
Re: The cerveza & taco build (70 Burban)
Ordered a ton of stuff from the dump shop and its been about a week and nothing!! and im in cali .... taking my bizzness else where!! been slowly getting things done:ito:
|
Re: The cerveza & taco build (70 Burban)
did ya finally get those motor mount bolts in....I remember my Dad and I had a hard time too
|
Re: The cerveza & taco build (70 Burban)
Quote:
Now i see why guys convert over to the late style mounts .... |
Re: The cerveza & taco build (70 Burban)
just finished sorting the wiring out and seeing what parts i need to finish the engine up !! I have a few boxes of goodies just sitting on the floor .. seems like its been a long time .....
|
Re: The cerveza & taco build (70 Burban)
When I did all my engine R&R's,I had the engine as level as possible with the motor mounts.Leave about a quarter inch of space b/n the mounts so you can move the motor around a bit.Then hand thread in both mount bolts from the bottom.Then once you have them started and not cross threaded,run them in a bit more, then set the motor down and snug em up.If it was easy everybody would do it,but thats how I get it done.I'm enjoying some Tacos and Cerveza right now mmmm:chevy:
|
Re: The cerveza & taco build (70 Burban)
:hh: still sippin the booze and working getting my front clip back on... i have to get my rad cleaned during the week..and i should have fun digging up all my parts i have had stored...
|
Re: The cerveza & taco build (70 Burban)
:devil::devil::devil::bann::bann::bann:
Quote:
|
Re: The cerveza & taco build (70 Burban)
uuuummm tacos any kind, any place AND CORONA ON TOP...hells yeeeeahh build that burb baby.....eat(tacos), drink(corona), and be merry
TE=babylonflyer;4721472]:devil::devil::devil::bann::bann::bann: yeah I got use to the later style mounts..... sissy me ... sippin on a negra modelo... but no tacos....[/QUOTE] |
Re: The cerveza & taco build (70 Burban)
need more tacos....er....updates on this:D
|
Re: The cerveza & taco build (70 Burban)
any updates?
man, they left a lot of work for you to finish! are you gonna do any suspension changes? whats the rear setup? |
Re: The cerveza & taco build (70 Burban)
updates.... getting odds and ends tied up ... you guys and girls know how it goes... u stash some gaskets,bolts and junk ..then when u go get them ...lost .. so yeah just finishing up to get it running
kev.... looking to clean up the air ride setup ..its kinda just there ... looking to mount the air valves as close as i can to the bag for fast fill and dump .. rear is just going to be a basic c notch ... nothing to crazy.. ill be posting some progress pics and my stash of goodies... hot day today |
Re: The cerveza & taco build (70 Burban)
Looks like a cool build. Glad you're doing things the right way.
|
Re: The cerveza & taco build (70 Burban)
really lacking on the pics..... i know got her running ,just fixing odds and ends... working on pics after this post
|
Re: The cerveza & taco build (70 Burban)
HTML Code:
My Pictures\Picasa\Exports\1970 SUB\ |
Re: The cerveza & taco build (70 Burban)
you can upload the pictures to the member gallery on this site and then link it here.
|
Re: The cerveza & taco build (70 Burban)
Love the tacos, and Corona! Perfect. Oh. the suburban is sweet too lol!
|
Re: The cerveza & taco build (70 Burban)
3 Attachment(s)
too long ..... must hit the streets soon!!
|
Re: The cerveza & taco build (70 Burban)
yeah regret selling the hulk!!! old burban!!
|
Re: The cerveza & taco build (70 Burban)
2 Attachment(s)
flaked my ash tray and glove box with ed roth rattlebombs
I didnt think to much of them but I can dig it now!!! Picked up some ralleys:ito: |
Re: The cerveza & taco build (70 Burban)
5 Attachment(s)
1.Pulled out gauges and clean them up
2 Getting ready to take off that paint and let chrome shine:ito: |
Re: The cerveza & taco build (70 Burban)
diggin the clip swap...welcome!
lol |
Re: The cerveza & taco build (70 Burban)
Sweet!
|
Re: The cerveza & taco build (70 Burban)
:metal: Thanks guys.
Seems everything the P.O touched is just poop!! Wiring in a radio and new steering wheel coming up. Wiring is a wicked hack job (i have seen a few).... Ordered some door gaskets and getting my coin togather for a roller paint job!! |
Re: The cerveza & taco build (70 Burban)
1 Attachment(s)
been slowly getting stuff done... radio and steering wheel pictures coming up... and getting ready to get some tires ...
|
Re: The cerveza & taco build (70 Burban)
got me my 205/70/15 ww... now to mount and balance them ..grant classic steering ......well ready for take off...:ito:
|
All times are GMT -4. The time now is 11:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com