The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   VA 72 blazer stuff (https://67-72chevytrucks.com/vboard/showthread.php?t=466537)

72blazer_mud_bogger 05-26-2011 08:35 PM
72 blazer stuff
 
5 Attachment(s)
$100 summit 20 circuit wiring harness: I dont have the box but everything that came with it is either spliced in or in a bag. SOLD

$150 Single wall hard top: Top is in driver condition, has a crack next to the handle with one small hole you can see in picture. SOLD

$200 (4) Stock 6 lug 15in wheels with center caps and outer chrome rings. GONE TO SCRAP

$100 Holley 650 CFM Carb with manuel choke and upgraged 50cc acel pump with rebuild kit

72blazer_mud_bogger 05-26-2011 08:38 PM
Re: 72 blazer stuff
 
5 Attachment(s)
few more pics

72blazer_mud_bogger 05-26-2011 08:42 PM
Re: 72 blazer stuff
 
1 Attachment(s)
last is the carb, I am willing to ship all of it, would prefer local pickup for the hard top but if you set up shipping for it I will get where it needs to be to get shipped.

47thriftmaster 05-26-2011 09:55 PM
Re: 72 blazer stuff
 
Do you have the key to the hatch? Interested in the top only, would be able to pick it up.

matthew79 05-26-2011 10:05 PM
Re: 72 blazer stuff
 
Interested in hatch if it gets to me.

72blazer_mud_bogger 05-27-2011 02:43 AM
Re: 72 blazer stuff
 
Quote:
Originally Posted by 47thriftmaster (Post 4702383)
Do you have the key to the hatch? Interested in the top only, would be able to pick it up.


No key came with it for the hatch when I got the truck.

72blazer_mud_bogger 05-27-2011 02:46 AM
Re: 72 blazer stuff
 
Quote:
Originally Posted by matthew79 (Post 4702424)
Interested in hatch if it gets to me.
Dont really want to seperate the hatch from the top just yet.

47thriftmaster 05-27-2011 10:42 AM
Re: 72 blazer stuff
 
Can you get a couple more pics of the top, mainly front lip and inside mounting rails.

72blazer_mud_bogger 05-27-2011 04:01 PM
Re: 72 blazer stuff
 
I will try to get some pics this weekend and get them posted by monday at the latest.

wiggins 05-27-2011 04:32 PM
Re: 72 blazer stuff
 
do you know if those are the original rims?

72blazer_mud_bogger 05-27-2011 05:52 PM
Re: 72 blazer stuff
 
to my knowledge yes they are original.

Quote:
Originally Posted by wiggins (Post 4703673)
do you know if those are the original rims?

olblue60@aol.com 05-31-2011 09:49 AM
Re: 72 blazer stuff
 
I'm interested in the harness. Are the wires indivually labeled? I have this color blind thing. Thanks

John

72blazer_mud_bogger 05-31-2011 12:05 PM
Re: 72 blazer stuff
 
yes all the wires are labeled. I do have the directions that came with them its just got a little moist in the garage but still very readable

47thriftmaster 05-31-2011 02:29 PM
Re: 72 blazer stuff
 
Any luck with the pictures of the top?

olblue60@aol.com 05-31-2011 10:14 PM
Re: 72 blazer stuff
 
Is this set up designed for GM columns?

72blazer_mud_bogger 05-31-2011 10:16 PM
Re: 72 blazer stuff
 
Sorry still tryin to catch up from the long weekend, I will get the pictures taken in the morning and post them when I get to work at night.

Quote:
Originally Posted by 47thriftmaster (Post 4710124)
Any luck with the pictures of the top?

72blazer_mud_bogger 05-31-2011 10:17 PM
Re: 72 blazer stuff
 
If you are talking about column ignition then no.

Quote:
Originally Posted by olblue60@aol.com (Post 4710981)
Is this set up designed for GM columns?

olblue60@aol.com 05-31-2011 10:25 PM
Re: 72 blazer stuff
 
I was looking at the summit racing add for this harness set. They offer the kit with or without the GM column connector. If you look at any gm column, there is a connector at the bottom of the column. It has many wires in the connector which works signals horn etc. Its not for the ignition switch. Your directions should specify what it is that you have. Thanks

John

wiggins 06-01-2011 12:42 PM
Re: 72 blazer stuff
 
can you tell me how wide they are?


Quote:
Originally Posted by 72blazer_mud_bogger (Post 4703770)
to my knowledge yes they are original.

TheWhiteElephant 06-01-2011 01:21 PM
Re: 72 blazer stuff
 
Just sent you a pm on the carb.

72blazer_mud_bogger 06-01-2011 04:04 PM
Re: 72 blazer stuff
 
it is the one with the column connector, however the connector that comes with the kit is flat and on my blazer its curved.

scott

Quote:
Originally Posted by olblue60@aol.com (Post 4711024)
I was looking at the summit racing add for this harness set. They offer the kit with or without the GM column connector. If you look at any gm column, there is a connector at the bottom of the column. It has many wires in the connector which works signals horn etc. Its not for the ignition switch. Your directions should specify what it is that you have. Thanks

John

72blazer_mud_bogger 06-01-2011 05:32 PM
Re: 72 blazer stuff
 
PM sent


Quote:
Originally Posted by TheWhiteElephant (Post 4711900)
Just sent you a pm on the carb.

72blazer_mud_bogger 06-01-2011 05:33 PM
Re: 72 blazer stuff
 
I will measure them when I get off in the morning.

Quote:
Originally Posted by wiggins (Post 4711854)
can you tell me how wide they are?

72blazer_mud_bogger 06-01-2011 05:34 PM
Re: 72 blazer stuff
 
Sorry for the delay my camera has been misplaced I should have the pics taken and up before the weekend.



Quote:
Originally Posted by 47thriftmaster (Post 4710124)
Any luck with the pictures of the top?

TheWhiteElephant 06-01-2011 10:07 PM
Re: 72 blazer stuff
 
If you could, I'd like to see more pics of the carb, too. It isn't a spreadbore, is it?

72blazer_mud_bogger 06-01-2011 10:54 PM
Re: 72 blazer stuff
 
As soon as I find my camera I will get some pics of the carb as well. I do believe it is spreadbore.

Quote:
Originally Posted by TheWhiteElephant (Post 4712815)
If you could, I'd like to see more pics of the carb, too. It isn't a spreadbore, is it?

47thriftmaster 06-02-2011 07:36 AM
Re: 72 blazer stuff
 
No problem, Figured I'd just through in a reminder and you'll get to it sooner or later. :smoke: Thanks

Quote:
Originally Posted by 72blazer_mud_bogger (Post 4712273)
Sorry for the delay my camera has been misplaced I should have the pics taken and up before the weekend.

72blazer_mud_bogger 06-07-2011 10:53 PM
Re: 72 blazer stuff
 
5 Attachment(s)
pics of the top you asked for

Quote:
Originally Posted by 47thriftmaster (Post 4713364)
No problem, Figured I'd just through in a reminder and you'll get to it sooner or later. :smoke: Thanks

72blazer_mud_bogger 06-07-2011 10:55 PM
Re: 72 blazer stuff
 
3 Attachment(s)
a few more...

Quote:
Originally Posted by 47thriftmaster (Post 4713364)
No problem, Figured I'd just through in a reminder and you'll get to it sooner or later. :smoke: Thanks

72blazer_mud_bogger 06-07-2011 10:58 PM
Re: 72 blazer stuff
 
sorry it took so long but the wheels are 9inches wide. let me know if you need anything else.

Quote:
Originally Posted by wiggins (Post 4711854)
can you tell me how wide they are?

72blazer_mud_bogger 06-07-2011 10:59 PM
Re: 72 blazer stuff
 
I found the camera and will have pics posted on wednesday. It is NOT spread bore. Hope that helps.

Quote:
Originally Posted by TheWhiteElephant (Post 4712815)
If you could, I'd like to see more pics of the carb, too. It isn't a spreadbore, is it?

47thriftmaster 06-07-2011 11:22 PM
Re: 72 blazer stuff
 
Are you up by DC?

72blazer_mud_bogger 06-08-2011 01:26 PM
Re: 72 blazer stuff
 
just south of dc by about 20 minutes in Vienna Va zip 22180. If you look on the map of the area I am 2 blocks away from 66 and 1 exit away from 495.

47thriftmaster 06-08-2011 05:10 PM
Re: 72 blazer stuff
 
PM sent

wiggins 06-10-2011 02:09 PM
Re: 72 blazer stuff
 
OK are the center caps metal or plastic?


Quote:
Originally Posted by 72blazer_mud_bogger (Post 4723673)
sorry it took so long but the wheels are 9inches wide. let me know if you need anything else.

72blazer_mud_bogger 06-10-2011 05:01 PM
Re: 72 blazer stuff
 
they look to be metal. they have to much weight to be plastic. would you like to closer pics of the caps

wiggins 06-10-2011 05:32 PM
Re: 72 blazer stuff
 
no thats good thanks.

Quote:
Originally Posted by 72blazer_mud_bogger (Post 4728376)
they look to be metal. they have to much weight to be plastic. would you like to closer pics of the caps

72blazer_mud_bogger 06-23-2011 08:36 PM
Re: 72 blazer stuff
 
TTT, if I am off on price make me a offer I want this stuff gone

wiggins 06-24-2011 10:11 AM
Re: 72 blazer stuff
 
would you consider selling the center caps w/o the rims?

DIAMONDJ 06-29-2011 12:30 AM
Re: 72 blazer stuff
 
Do you still have the top


All times are GMT -4. The time now is 11:56 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com