Parting 70 CST20
 

Next up is a pretty well equipped truck. It has been sitting in the black berries
since 1985 so I can't imagine that any of the seals/gaskets are any good. It was in a front end wreck that ruined most of the right front of the body and bent the frame horn a bit. Please respond in thread to avoid confusion.
Thanks,
Ray

core engine- $100 local SOLD
core th400 trans- $50 local SOLD
complete doors- $100 each (I don't want to break these down)
small block engine towers- $20 shipped
power steering brackets- $40 shipped
seat belts with no center belt- $26 shipped...they are dirty, but not torn up
cargo light with wires- $30 shipped...crack in lens, chrome worn on top SOLD
crank, water pump pulleys- $52 shipped
a/c brackets- $100 shipped...all 7 are there SOLD, but I have another set.
hood bowtie- $13 shipped...crack in the blue section not bad SOLD
manual throttle- $32 shipped...complete knob to pedal bracket SOLD
cloudy mirror- $15 shipped
a/c vents...all 3 on dash, 2 defrost driver condition- $36 shipped SOLD
a/c engine side air box no broken tabs- $50 plus shipping
instrument cluster- $20 plus shipping
rear gas tank (suburban?)- $75 plus shipping
auto steering column- $50 plus shipping
th350 shift linkage complete column to trans- $30 plus shipping
glove box lid- $15 plus shipping SOLD
AT crossmember- $20 plus shipping
1 1/16 sway bar with frame brackets- $30 plus shipping
switches and lighter with CST knobs- $30 shipped for all PENDING
aux. gas filler cover- $20 plus shipping...DeadheadNM is first up SOLD
tool stowage- don't know yet as I haven't cracked it open SOLD
front drum brake setup- about 11 cents per pound;) CORRECTION- 11 1/2 cents and gone!

Re: Parting 70 CST20
 

Ray:

Interested in all the aux tank parts that can be shipped. Does the truck have the dash switch/harness to toggle between sending units?

Thanks!

Re: Parting 70 CST20
 

I also need one nice below eyeline mirror head.

Re: Parting 70 CST20
 

pics

Re: Parting 70 CST20
 

Ray, interested in manual throttle setup if its all there. Thanks Randy

Re: Parting 70 CST20
 

more

Re: Parting 70 CST20
 

Interested in the CST 20 emblems. How much for them shipped to 55344?

Re: Parting 70 CST20
 

sksk

Re: Parting 70 CST20
 

Also the glovebox door pending pics of SPID and shipping.

Re: Parting 70 CST20
 

mkay

Re: Parting 70 CST20
 

Is the antenna in good shape?

Re: Parting 70 CST20
 

I'll take the A/C brackets. How do you want paid? WES

Re: Parting 70 CST20
 

rdrde

Re: Parting 70 CST20
 

www.

Re: Parting 70 CST20
 

Is the in bed spare tire mounting hardware still present?

Re: Parting 70 CST20
 

headliner shipped to 28337?If it comes out unbroken price trim to.Thanks

Re: Parting 70 CST20
 

Toolbox door after you figure it out...

Re: Parting 70 CST20
 

DeadheadNM- I will pull those parts and post pics and prices.
Randy- Check post 13 pic...it was all hooked up when pulled. I don't know if the engine side barrel clamp is stock.
Vintage Windmills- The door is about $13 to ship. There is only 1 good emblem...the other is bent. $12 for the good one and free for the bent one. $40 shipped for everything
Classic Heartbeat- a/c brackets are yours. pm sent
Eric- I hope to crack it by Wed.

Thanks,
Ray
Sorry, I took the headliner and in bed tire carrier for myself.

Re: Parting 70 CST20
 

Interested in both the e-brake pad and trim/brake peddle pad and trim. Thanks, shipping would be to 28327. Pm me total and pay pal info.
http://67-72chevytrucks.com/vboard/a...1&d=1307408186

Re: Parting 70 CST20
 

I'll take it Ray, Thanks Randy

Re: Parting 70 CST20
 

47thriftmaster- $10 total for both...I can include with vents

Randy- pm sent

Thanks,
Ray

Re: Parting 70 CST20
 

Sounds good, will add another $10 now.

Re: Parting 70 CST20
 

How much for ALL the A/C stuff, Inside and out side boxes and the vac vents, etc?? thanks Scott

Re: Parting 70 CST20
 

I'll take that piece of trim at the paint line below the passenger side rear window Post #4 pic 2 (and all the plastic clips) if the price is right shipped to 92011.

Re: Parting 70 CST20
 

How's the piece of woodgrain trim between the left front wheel and door? If unharmed, price and shipping to 54956. Thanks.

Re: Parting 70 CST20
 

Ray,
Is the engine block heater still intact?

Re: Parting 70 CST20
 

interested in the rear view mirror and door panels. Whats the price for those items. I will pick them up.

Brian

Re: Parting 70 CST20
 

Brian,
$5 for the mirror. I'm trying to keep the doors complete right now.
Thanks,
Ray

Re: Parting 70 CST20
 

Biscayne Stocker- $120 plus shipping for both inside and outside boxes, all 3 vents, the 2 defrost vents, and all ducting except for the flex ducting which is already shattered.

bollybib- $23 shipped for that trim piece.

FirstOwner69- Its driver condition...One ding and a small tear at end. $12 shipped

Thanks,
Ray

Re: Parting 70 CST20
 

Its gone.

Re: Parting 70 CST20
 

47thriftmaster- deduct $5 because the brake pedal rubber shattered

DeadheadNM- $65 plus shipping for the cover, all filler neck pieces (rubber pieces are junk), the wiring harness to the toggle (the toggle had been replaced), and the antenna...there is a tear on the outer insulation on the antenna wire, but should work fine. I expect the shipping to run about $20.

Thanks,
Ray

Re: Parting 70 CST20
 

i need the lower alt bracket and the rear power steering pump bracket would you sell them apaart from the other brakcets? thanks in advance ray

Re: Parting 70 CST20
 

1) I'll take all the aux tank stuff w screws/bolts but do you also have the floor mounted tank selector valve? If it's not a PITA I would also take the harness to the aux tank sending unit.

2) I'll take the antenna if the chrome is in good shape.

3) Is the bracket for the in-bed spare tire mount still with the truck?

Thanks Ray!

Re: Parting 70 CST20
 

I'll pass on the woodgrain trim piece. Thanks!

Re: Parting 70 CST20
 

Sounds good. Please PM me with payment info!

Re: Parting 70 CST20
 

good i'll take it...pm me your payment info...thanks

Re: Parting 70 CST20
 

Rick- I can't break up the ps brackets, but I think I have a loose lower alt. bracket. I'll let you know.
DeadheadNM- I will pull the selector valve and include that with the other parts. The harness (one wire) to the aux. tank is gone. The chrome on the antenna has chatter marks and scuffs on the whip, but the base looks pretty good. Sorry, I took the in bed tire carrier for my project.
FirstOwner- no problem
VW- sending pm
bollybib- sending pm

Re: Parting 70 CST20
 

payment sent. WES

Re: Parting 70 CST20
 

Thanks a lot Ray. I'll take the antennae. If you have a good OEM below eyeline mirror (just the head I have the tripod mount) to sell I would take that also. Send PM w total when possible.

If you ever want to part with that spare tire bracket I'd give it a good home :)

Pete

Re: Parting 70 CST20
 

Krazy, Do you have the cowl flap and the kick panel flap with the vac. pods also?? Shipped to 21122