Parting out 77 3/4 ton 4x4
 

Just in today, this 77 4x4 long bed, axles are sold already, no tilt or tach dash,
AC, turbo 350, 203, 350 engine
decent tailgate with tailgate band $80 + shipping
4" lift, no shipping $140
Core support $75
Not much else nice stuff, ask & I'll check, probably scrap within a week.
Thanks,
Tom

Re: Parting out 77 3/4 ton 4x4
 

message sent about tailgate,grill and ac parts.

Re: Parting out 77 3/4 ton 4x4
 

willing to cut off some panels off cab that i need for patch panels?

Re: Parting out 77 3/4 ton 4x4
 

how bangednd up is the yellow trim and is it all there???? how much shipped to 29073

Re: Parting out 77 3/4 ton 4x4
 

Trout, trim is all there except front right fender trim, some of the trim pieces have had screws ran through them to hold em on, for all the trim except tail gate $50 + shipping, the upper bed trim would run up the price of shipping.

54 caddy, I'll cut the cab for patches, what pieces do you need?

madcow pm returned
pics of the inside of tailgate, a small hole poked near the bottom, some dents on the inside, tailgate protector riveted on

Re: Parting out 77 3/4 ton 4x4
 

1 chrome & 1 aluminum grill $25 each, madcow has dibs on the chrome one
headlight bezels $10 each

Re: Parting out 77 3/4 ton 4x4
 

Is it an 8 lug?

Re: Parting out 77 3/4 ton 4x4
 

willing to cut a section out of the top of the bed rail on the drivers side 2ft long if its not surface rusted?

Re: Parting out 77 3/4 ton 4x4
 

let me get you a picture of the piece i need

Re: Parting out 77 3/4 ton 4x4
 

How are the mirrors? Looking for real nice ones for resto. Pics would be nice. Thanks, Brian

Re: Parting out 77 3/4 ton 4x4
 

im going to have to pass

Re: Parting out 77 3/4 ton 4x4
 

Heres pics of the grill, a couple of the mounting tabs at the top are 1/2 broke
$35+ shipping

it was an 8 lug, but the axles are already sold

I'll get some pics of the mirrors

give me a couple weeks if you can on the bed patch, I'd like to sell the bed whole, if that doesn't happen before it goes to scrap, I'll selll that patch for $20

Thanks,
Tom

Re: Parting out 77 3/4 ton 4x4
 

Mirrors are both damaged.

Re: Parting out 77 3/4 ton 4x4
 

sounds good thanks

Re: Parting out 77 3/4 ton 4x4
 

Hey Tom, I'm interested in the grill. Other than the mounting tabs, everything else intact and the chrome is good???
I sent you a pm on the 1ton dropped spindles too.
Thanks, GM

Re: Parting out 77 3/4 ton 4x4
 

I'm speaking about the stock 1980 chrome grill if it isn't spoken for or sold. Thanks.

Re: Parting out 77 3/4 ton 4x4
 

I need a steering column for a 78. Will the one you have work?

Re: Parting out 77 3/4 ton 4x4
 

Any chance of you having step bumper mounts? Some lady hit me today and snapped both of mine. Must be thick type. guessing 3/8 inch? If you have post pic and I will know if they are right.

Joe

Re: Parting out 77 3/4 ton 4x4
 

Does it have a bolt in trans tunnel?

Re: Parting out 77 3/4 ton 4x4
 

1 ton jimmy, I'll check
catfishtn It has a step bumper in the back, the heavy duty style, I'll get you a pic

nplocoman, this one is sold, do you need for a standard or auto?

80 streetcoupe, I posted the grill pics for another member, in the wrong thread, if he passes its yours next, it has good chrome & besides the 2 tabs is a real decent original. Also need your zipcode for a ship estimate on the spindles

Re: Parting out 77 3/4 ton 4x4
 

Does it still have rear spring mounts?

Re: Parting out 77 3/4 ton 4x4
 

Needing one for a standard. It needs to go in a 78 GMC c35. My truck was stolen and the column destroyed.

Re: Parting out 77 3/4 ton 4x4
 

If you still have the distributor, could you take it apart and check the numbers on the weights?

Im looking for # 375 center weight and # 41 outside weights

Thanks PM me if you got em because i dont check the squarebody forum much

Re: Parting out 77 3/4 ton 4x4
 

What do you need for the bed minus the tailgate? Got a buddy in Omaha been looking for a clean one. LMK what kind of overall shape it's in. I'll see if how he wants to contact you. Thanks.

BTW, what state is this actually in? Listing says Arkansas but your ID is in Arizona.

Re: Parting out 77 3/4 ton 4x4
 

1tonjimmy, it does have a bolt in tunnel, as far as I know, for an automatic, I haven't pulled the carpet because most of the interior is filled with cholla cactus, $35 + shipping, let me know if interested, because I'm not going to pull it unless you want it.

McMurray76, it still has the rear spring mounts $25 each or $75 for all 4 shipped

nplocoman, I'll keep a lookout for one

oldblu68chevy I'll check when I can

68c10 hotrod its in arizona, I screwed up when I posted it.
The bed is in pretty good shape, I have someone local looking at it, if they pass then its for sale @ $175, I'll be in Omaha this weekend, but I can't bring it with me!
Thanks,
Tom

Re: Parting out 77 3/4 ton 4x4
 

Ive already found the 375 just need the 41's now

Re: Parting out 77 3/4 ton 4x4
 

Tom,

It's too bad you don't have a way to bring it cuz I think he'd pay extra & it would cover your gas for the trip. LMK if something changes or you want to talk on the phone, I'll hook you guys up. He just happens to be siding the house across the street.

Bryan
cell 402.578.3406

Re: Parting out 77 3/4 ton 4x4
 

Are you still willing to sell the rear spring mounts?