The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   KS 1 blazer and 1 jimmy getting parted (https://67-72chevytrucks.com/vboard/showthread.php?t=486202)

teeitup 09-25-2011 11:02 PM

1 blazer and 1 jimmy getting parted
 
5 Attachment(s)
I've got them most the way parted already, but I'm going to clean up what is left and haul off leftovers. I took these pics late this evening so I'll get seom more pics Mon after work. Both have titles. Bodies are trash, nothing good, windshield frames are rusty
rearends $100 each
disc brake front end $100
crossmembers $30 plus shipping each
leaf springs
Thanks Randy

Ridnhi 09-25-2011 11:46 PM

Re: 1 blazer and 1 jimmy getting parted
 
I am interested in the farthest forward spring mount on the drivers side front spring. I need where spring mounts and where rad. support bolts up. Price shipped to 62959? Thanks
Posted via Mobile Device

k5hart 09-26-2011 06:48 AM

Re: 1 blazer and 1 jimmy getting parted
 
How are the windshield frame on either one?

kc69 09-26-2011 09:54 AM

Re: 1 blazer and 1 jimmy getting parted
 
I'm needing a hard top, are those any good that you have, and how much?? Thanks

29od1 09-26-2011 01:13 PM

Re: 1 blazer and 1 jimmy getting parted
 
Randy,

Do you have any sun visor assemblies for either one?

29od1 09-26-2011 01:15 PM

Re: 1 blazer and 1 jimmy getting parted
 
How are the doors as well?

teeitup 09-26-2011 05:54 PM

Re: 1 blazer and 1 jimmy getting parted
 
1 Attachment(s)
Ridnhi, I have these off already $20 plus shipping each.

K5hart, sorry they both are rusty

KC69, pics coming in a bit, I also have a decent double wall top for $60

29od1, the green one has some if I can get them off. No good blazer doors

Thanks Randy

teeitup 09-26-2011 05:56 PM

Re: 1 blazer and 1 jimmy getting parted
 
5 Attachment(s)
single wall pics

teeitup 09-26-2011 05:57 PM

Re: 1 blazer and 1 jimmy getting parted
 
2 Attachment(s)
more

teeitup 09-26-2011 05:58 PM

Re: 1 blazer and 1 jimmy getting parted
 
IMO the back driver corner is the worse part, otehr spots are just small cracks

6t727t2 09-26-2011 06:10 PM

Re: 1 blazer and 1 jimmy getting parted
 
Hey Randy, Any top to body brackets, door/jamb shims, wiring harness from single wall top, hatch guts/hinges? Thanks

teeitup 09-26-2011 06:23 PM

Re: 1 blazer and 1 jimmy getting parted
 
Harry, I've got quite a few things, I'll get pics Tues after work. Thanks Randy

72gmcshorty 09-26-2011 08:23 PM

Re: 1 blazer and 1 jimmy getting parted
 
any of the rear quarters damage/rust free? (specifically area around tail lights?)

meathead95 09-26-2011 08:24 PM

Re: 1 blazer and 1 jimmy getting parted
 
theses look familiar did you get them in indianola iowa?

teeitup 09-26-2011 08:55 PM

Re: 1 blazer and 1 jimmy getting parted
 
72gmcshorty, I'll look Tues

Meathead95, yes thats where I got them. The pics made them look better than are unfortunately

Thanks Randy

meathead95 09-26-2011 08:58 PM

Re: 1 blazer and 1 jimmy getting parted
 
wish you would have said something i looked at them im only 30 miles north of where they are... man you sure go along way to get these trucks. holler if you need me to look at something in the future in the des moines area.

teeitup 09-26-2011 09:23 PM

Re: 1 blazer and 1 jimmy getting parted
 
Yes going up there for these was a pain, thats about as far as I go, or I mean used to go, gas prices are killing me on going very far. Thanks for the offer though I still look up that way. Thanks Randy

Ridnhi 09-26-2011 10:53 PM

Re: 1 blazer and 1 jimmy getting parted
 
teeitup- I'll take the nicer of the two spring mounts. let me know on shipping.

I am also interested in door jam shims for one side if you have them. i have one side already. Thanks, Eli

teeitup 09-26-2011 11:12 PM

Re: 1 blazer and 1 jimmy getting parted
 
Eli, I'll get quote Tues after work, and yes I have some shims too. Thanks Randy

47thriftmaster 09-26-2011 11:19 PM

Re: 1 blazer and 1 jimmy getting parted
 
Randy,
How are the wheels? I had 2 out of 5 that were bad so looking for two to replace. The wheels need to be the stock 15x6 6 lug with 4" backspacing for my Blazer. If you have pics of your best 2 and shipping cost.

Thanks, Monte

teeitup 09-26-2011 11:27 PM

Re: 1 blazer and 1 jimmy getting parted
 
Monte, I'll check backspacing, but I think they are 3.5. Thanks Randy

Ridnhi 09-26-2011 11:38 PM

Re: 1 blazer and 1 jimmy getting parted
 
Randy- Thanks, Eli

29od1 09-27-2011 08:07 AM

Re: 1 blazer and 1 jimmy getting parted
 
How much would you want for the visors? I'm heading up that way in a few weeks and could pick them up then.
Thanks,
David

1970greenc10 09-27-2011 10:58 AM

Re: 1 blazer and 1 jimmy getting parted
 
How much for a set of rear spring mounts and a pair of rear shock mounts. Shipping to 14075. Could I see some pics please. Thanks,Marty

teeitup 09-27-2011 04:24 PM

Re: 1 blazer and 1 jimmy getting parted
 
David, $20 for them

Marty, not sure if I'm cutting frame down that far yet

Thanks Randy

teeitup 09-27-2011 04:25 PM

Re: 1 blazer and 1 jimmy getting parted
 
5 Attachment(s)
double wall top

teeitup 09-27-2011 04:26 PM

Re: 1 blazer and 1 jimmy getting parted
 
5 Attachment(s)
166666666666

teeitup 09-27-2011 04:27 PM

Re: 1 blazer and 1 jimmy getting parted
 
3 Attachment(s)
not sure if you have been around these types tops but the single wall is way easier to move around

29od1 09-27-2011 04:34 PM

Re: 1 blazer and 1 jimmy getting parted
 
Sounds good I'll take the visors.
David

bigbadchev72 09-27-2011 06:18 PM

Re: 1 blazer and 1 jimmy getting parted
 
good front seatbelts? Im looking for some black ones

47thriftmaster 09-27-2011 06:48 PM

Re: 1 blazer and 1 jimmy getting parted
 
Quote:

Originally Posted by teeitup (Post 4922033)
Monte, I'll check backspacing, but I think they are 3.5. Thanks Randy

Thank You Randy, just let me know.

teeitup 09-27-2011 10:15 PM

Re: 1 blazer and 1 jimmy getting parted
 
David, thay are yours, I have a pic of them, will post in later this evening

bigbad, I do not have a complete set of blazer belts, sorry

Monte, checked them out, all are 3 1/2 back spacing, sorry

Thanks Randy

Ridnhi 09-28-2011 09:39 AM

Re: 1 blazer and 1 jimmy getting parted
 
Randy - Payment Sent

47thriftmaster 09-28-2011 10:19 PM

Re: 1 blazer and 1 jimmy getting parted
 
No problem, thank you for checking.

superlifted 10-01-2011 06:28 PM

Re: 1 blazer and 1 jimmy getting parted
 
How much for the front cross member? shipped to 76306.

teeitup 10-01-2011 07:58 PM

Re: 1 blazer and 1 jimmy getting parted
 
I'll check out the one in the red one, the green one I'm not parting frame yet. Thanks Randy

72gmcshorty 10-02-2011 07:35 PM

Re: 1 blazer and 1 jimmy getting parted
 
Quote:

Originally Posted by 72gmcshorty (Post 4921533)
any of the rear quarters damage/rust free? (specifically area around tail lights?)

still waiting for update......

teeitup 10-02-2011 07:37 PM

Re: 1 blazer and 1 jimmy getting parted
 
sorry none of the bodies are any good on either of these. Thanks Randy

teeitup 10-02-2011 09:09 PM

Re: 1 blazer and 1 jimmy getting parted
 
1 Attachment(s)
front crossmember on red one, but I do not know if I can get it out without damaging it, since it goes under the steering box brace. $25 plus shipping for it. Thanks Randy

teeitup 10-03-2011 10:03 PM

Re: 1 blazer and 1 jimmy getting parted
 
4 Attachment(s)
pics of some stuff I got off tonight


All times are GMT -4. The time now is 05:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com