Full bagged chassis and much more for sale
 

-Well it pains me to do this but here goes 66 chassis 2.5 inch z boxed inner frame. Silver vein powder coat. Air ride tech upper and lower control arms. All new bushings and power steering and painted linkage. Custom powder coated blue belly pan for under the frame. All braided fuel lines are mounded with fuel pump. All half inch air line with blitz valves and dakota digital air ride controller very trick. Suicide doors rear triangulated rear kit powder coated blue. 5 gallon air ride tank powder coated blue. All new rebuilt rear end with billet cover of coarse the rear end is powder coated blue too. Two piece driveline. Cpp motor mounts for small block, 1960 bumper shaved with new brackets to push it back toward the core support. Cpp front disc brakes with powder coated rotors. It only needs rear disk brake kit. Every nut and bolt is new as are all the bearing. Also have the radiator aluminum 3 core that will come with the frame. also has new body mounts. If you want engine and trans it will be another 1800. $5800

-57 chevy dash with dakota digital gauges for 63-66 truck. Body work is complete and dash is in primer $800
-new chrome tilt idit column shift 60-77 c10 trucks. $300 sold
-hanks custom sheet metal step side bed with custom tail lights and electric tail gate and new fenders body work is done on the fenders 2000 firm.
-66 cab with shaved gas door, rear cab, and fire wall with cutom hood and inner fenders, new rockers and it is in sealer. 1000. comes with title.
- Billet specialties 18 by 4.5 gasser front wheels and 20 by 10 heritage rear wheels. I paid close to 6000 for these wheels 3500 takes them. This is a smoking deal front wheels were 3000 alone.
Billet specialties billet pully kit 800 comes with all brackets, ac, power steering pump and altinator. Its polished and the one in the picture $800
http://i1005.photobucket.com/albums/...chevy073-1.jpg
http://i1005.photobucket.com/albums/...y/chevy217.jpg
http://i1005.photobucket.com/albums/...y/chevy211.jpg
http://i1005.photobucket.com/albums/...y/chevy216.jpg
http://i1005.photobucket.com/albums/...y/chevy210.jpg
http://i1005.photobucket.com/albums/...y/chevy173.jpg

Re: Full bagged chassis and much more for sale
 

http://i1005.photobucket.com/albums/...y/chevy174.jpg
http://i1005.photobucket.com/albums/...y/chevy175.jpg
http://i1005.photobucket.com/albums/...y/chevy155.jpg
http://i1005.photobucket.com/albums/...chevy002-1.jpg
http://i1005.photobucket.com/albums/...chevy001-1.jpg
http://i1005.photobucket.com/albums/...chevy010-1.jpg
http://i1005.photobucket.com/albums/...chevy014-1.jpg
http://i1005.photobucket.com/albums/...vytruck065.jpg

Re: Full bagged chassis and much more for sale
 

http://i1005.photobucket.com/albums/...vytruck067.jpg
http://i1005.photobucket.com/albums/...vytruck062.jpg
http://i1005.photobucket.com/albums/...y/DSC_0253.jpg
http://i1005.photobucket.com/albums/...chevy013-2.jpg
http://i1005.photobucket.com/albums/...chevy011-2.jpg
http://i1005.photobucket.com/albums/...chevy008-2.jpg
http://i1005.photobucket.com/albums/...chevy014-2.jpg

Re: Full bagged chassis and much more for sale
 

Re: Full bagged chassis and much more for sale
 

http://i1005.photobucket.com/albums/...5138926629.jpg
http://i1005.photobucket.com/albums/...5138837810.jpg
http://i1005.photobucket.com/albums/...5138867199.jpg
http://i1005.photobucket.com/albums/...5138825730.jpg

Re: Full bagged chassis and much more for sale
 

How much for chrome tilt Shipped to me? What wiring connector does it have?

Re: Full bagged chassis and much more for sale
 

Will you ship me the column? I will take it. 32828 is my zip.
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

I'd love to have the whole project. That's an absolute steal especially the cab, dash, and bed!!!

Best wishes on the sale.

DO you still have the smoothies (5 lug -5x5?) Is it a set or just two and if selling...how much and backspacing (and with or without tires)

Thanks

Re: Full bagged chassis and much more for sale
 

Stock connector I believe but dont hold me to it

Re: Full bagged chassis and much more for sale
 

Va72c10 has first dibs if he wants it but I need your zip

Re: Full bagged chassis and much more for sale
 

23.95 to ship. But I need to see if va72c10 wants it first because he asked first.

Re: Full bagged chassis and much more for sale
 

Sold smoothies

Re: Full bagged chassis and much more for sale
 

No prob. When I reloaded the page I saw his post. I was like damn, he got me by two minutes. Let me know. Il take it for sure.
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

What's the specs on the engine and trans?

Re: Full bagged chassis and much more for sale
 

ok I will let you know. Thanks

Re: Full bagged chassis and much more for sale
 

Backspacing and bolt pattern on the 20x10 BS Heritage wheels?
Also,... do you still have the BS V-Trac for the engine?

Re: Full bagged chassis and much more for sale
 

Motor is a rebuild 350. 30 over with cast iorn world heads and valve train. Decent cam with forged piston and steel crank. All gaskets are new. The motor is new and was build by motor machine in Carmichael ca. The built the motor in my 72 cheyenne.

Re: Full bagged chassis and much more for sale
 

800 for the v track. little nick on the main bracket can be polished out. Never used just mounted. I will have look up the back spacing on the wheels. Think the lip is 2 and half inches. The pattern is 5 on 5

Re: Full bagged chassis and much more for sale
 

6.0 backspacing
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

23112 zip. Thanks!

Re: Full bagged chassis and much more for sale
 

27.70
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Just wanted to clarify the engine and v trac system are being sold separate. I can make someone a package deal on the engine trans and motor if they are interested in it
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

wow, awesome project, sorry u have to sell.

Can u tell me where u got the valve covers?

Thanks

Re: Full bagged chassis and much more for sale
 

Don't have to sell my wife wants something with more room so I am going a different direction now. Shewnts a burb. So I am going to start over. Glad you like it
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Valve covers are billetspecialties
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

How much for the radiator? I can pick it up! No shipping. Thanks
Tony from Norcal
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Interested in the dash. Can I get a picture of it as it is now and what comes with it? Shipping quote would be to Virginia 23072.
Thanks
Jimmy

Re: Full bagged chassis and much more for sale
 

150
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Sure I will shoot a picture right now
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Picture will be up in a few hrs sorry for the delay battery was dead in the camera

Re: Full bagged chassis and much more for sale
 

Here are the pictures of the dash. It will come with the stock 57 bezel not in the pic. The body work is done on the dash. The gauges come with the two different colors of lenses blue and teal. I also have the gauge bezels I will through in that are billet. I have all the billet defroster vents and ac heater vents but they will be extra. Total there is a 100 hrs of work in this dash. The gauges were 800 and the billet bezels were 150. Hope this helps http://i1005.photobucket.com/albums/...Picture003.jpg
http://i1005.photobucket.com/albums/...Picture004.jpg

Re: Full bagged chassis and much more for sale
 

I'm going to pass on the steering column. Not sure if I will do black, paint to match, or chrome.

Re: Full bagged chassis and much more for sale
 

Column sold
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Column sold.
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

I need to hold off for now on the dash. It looks sweet and a heck of a deal but just not able to swing the cash right now.
Jimmy

Re: Full bagged chassis and much more for sale
 

Ok
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

I will part the suspension an the air ride. I will sell the rear for 1800. That will include rear end all new gears, bearings and seals, suicidedoors rear triangulated rear kit with bags and shocks.
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

What all do you have for steering parts and how much?
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

I have complete power steering and all tie rods and ends. Also have air ride tech a arms
Posted via Mobile Device

Re: Full bagged chassis and much more for sale
 

Price on the a-arms shipped to 65043?

Are they in silver vein?

And are the a-arms the same for 60-72? Or are the 71-72 different?