1960-66 parts from big stash
 

Been playing with 60-66 trucks for 18 yrs and got a bunch of left-over stuff that came in a big pile of 60-66 parts I bought from a guy recently - do not need over 1/2 of this stuff - maybe someone else does.

1) gas tank supports w/ straps rust / rot free = 20.00 (pair)

2) small back glass = 20.00 (clear)

3) kick panel vent housings w/ vents = 20.00 (pair)

4) 60-66 cowl extensions = 20.00 (pair)

5) 60-66 wiper cowl panel = 20.00

I have bunches of other stuff - will post other stuff separately as I get pictures taken or feel free to inquire if you are hunting something - I probably have it

Shipping will have to be added to the above prices based on your zip code but will only be exactly whatever it actually costs me - FedEx, USPS, Parcel post, whatever you want. I take Paypal, Money Order, Check, Cash etc

Re: 1960-66 parts from big stash
 

3) kick panel vent housings w/ vents = 20.00 (pair)

4) 60-66 cowl extensions = 20.00 (pair)



how much shipped to 22976?
Thanks

Re: 1960-66 parts from big stash
 

let me get them boxed and weighed - won't be much at all if we send them USPS Parcel post - would expect around 15.00 to 18.00 or less for all of it, but lets check to make sure. Will PM you with correct shipping total. Thanks!

Re: 1960-66 parts from big stash
 

do you got a big back window??

Re: 1960-66 parts from big stash
 

I need lots of things for my 1966, but I'll keep it short for now. I'm interested in both door windows if they are not scratched. Vent window assemblies if they are not damaged. How about a complete body wiring harness that has all the connectors and sockets? Dash cluster, with guages are preferred, but will idiot lights are okay. Ignition switch, cigarette lighter, wiper switch, hi/lo switch, choke cable, heater controls.

Re: 1960-66 parts from big stash
 

Drivers side door? Looks like I see one peeking in the corner of the pic?

Re: 1960-66 parts from big stash
 

GMC Nut,
I sent you PM

Re: 1960-66 parts from big stash
 

I am sorry Chad, I only have a small rear glass right now. Not sure if you have a "home owned" glass shop nearby or not, but I recently went to mine and told him I needed door and vent glass and he just cut it from patterns all glass shops have access to - the wide back window is just a simple piece of flat glass - nothing special at all - will be cheaper than paying shipping if you just have one cut....

Re: 1960-66 parts from big stash
 

I am sorry 64GMCHorsepower; the doors you see in the pic are 60-63 style and I sold them a few weeks back. Hard to find any nice 64-66 doors these days....wish I could help

Re: 1960-66 parts from big stash
 

I have some of this stuff - I must say though, after 18 yrs of fooling with 60-66's I have yet to ever find original glass with no scratches - you will be happier if you take your tracks and vent frames to the local glass shop and get them to cut new pieces and re-install them for you - this is pretty cheap most of the time. I just paid like 34.00 including a pattern fee at my glass shop and they did me two tinted wing vent glasses and installed them in my restored frames. Not too bad.....
As for the other parts, let me look around - I will post a pic of the deluxe heater controls you asked about - got that on hand and easy to grab. Will have to hunt the rest - its around here somewhere :)

Re: 1960-66 parts from big stash
 

JJ, I went and got the cowl extensions and vents for you today, and will box and weigh them tomorrow afternoon so I can get you a shipping quote - won't be much. More shortly....

Re: 1960-66 parts from big stash
 

I have a 60 so would be interested in any parts you have that are different than later models. Let me know what you have.
Wiring harness for interior w/ fuse blocks would be really nice.
Because of weight if you're close to UPS that'd probably be cheaper.
Thanks,
Vickie

Re: 1960-66 parts from big stash
 

ok - fedex says 20.00 ought to do it - actually says 2 business days to get to you which is pretty fast - prefer money order or personal check but if you would rather can do paypal....just let me know....

Re: 1960-66 parts from big stash
 

hey vickie - i have quite a few parts for 60-62 trucks, and do have a wiring harness, but just brought it back from storage and need to go over it to see what is or is not cut or buggered....if its all ok and not cut up it will make you a good harness maybe....more shortly.

I have door panels, 3 speed columns, hood pods, real nice steel 60 grille, windshield chrome, some non-chrome rimmed (plain) interior knobs, steering wheels (plain and deluxe), seat, and all kinds of other stuff left over for a 1960. Will trade too - you may have 1960 parts i need?

Re: 1960-66 parts from big stash
 

I'm Looking for a cigarette lighter for my '64 ?
Posted via Mobile Device

Re: 1960-66 parts from big stash
 

Ok let me know about the wiring harness...I need to check truck and see what i nees...I do need a driver door....

Re: 1960-66 parts from big stash
 

If you have a partial set of chrome windshield trim, I would be interested in at least one of the clips that covers the joints.

Re: 1960-66 parts from big stash
 

I don't think I have any spare windshield clips, but seems like LMC, Jim Carter Truck parts or the Truck Shop in Orange CA has them - I may be wrong but I think they are reproduced....

Re: 1960-66 parts from big stash
 

OK - checked that harness and it looks pretty good - its such a squirrel nest of wires I couldn't tell everything about it, but looks to be complete w/ ignition switch, cig lighter and all plugs in tact. I did see one or two wires with newer terminal ends on them, but overall I think this will work - I can send it to you in a flat-rate box from USPS for 15.00 and if you like and want to keep it, you can pay me whatever you think its worth....sound fair?

Send me a PM and I will give you my address to send a money order or personal check for the shipping amount, and I'll get it sent your way....Thanks!

Re: 1960-66 parts from big stash
 

Does it have the fuse blocks also? Mine has the main block and then a smaller one to the left, which burned up. Also do you have engine compartment wiring?
Heres pics of fuse blocks:

Re: 1960-66 parts from big stash
 

Forgot link http://67-72chevytrucks.com/gallery/...y.php?cat=1483

Re: 1960-66 parts from big stash
 

This harness is out of a 62 - so it has the benefit of having all the 60-61 type connectors, but connected to a single block like a 63-66 has - has all the fuses too.....a better replacement for a 60-61 in my opinon

Re: 1960-66 parts from big stash
 

Don't think I have the engine bay wiring but know where a couple trucks are that do - will go look and see what I can dig up for you

Re: 1960-66 parts from big stash
 

Ok. PM sent

Re: 1960-66 parts from big stash
 

I think I have a spare somewhere, but in the meantime I did find my complete set of deluxe 64-66 knobs so I am going to post that set for sale and if you want the set as a means of getting the cig lighter in that group, then cool, but if not I can come up with you just the cig knob itself - just don't want to break up my set - watch for it shortly

Re: 1960-66 parts from big stash
 

K thank... Standing by.
Posted via Mobile Device

Re: 1960-66 parts from big stash
 

How bout a steering wheel....plain or delux doesnt matter....need to replace the trans am wheel thats on it now....shipped to 41001....Thank you

Re: 1960-66 parts from big stash
 

Hey fellow alabamen do you have any swb fleetsibe bed sides, i need a pass. Side, would also like to know about the streeing wheels. Thanks

Re: 1960-66 parts from big stash
 

Hi, how much for that 1960 grille if you still have it?

Re: 1960-66 parts from big stash
 

Got several but one is particularly nice and has only hairline cracks at the base - will take a pic and post for you

Re: 1960-66 parts from big stash
 

OK - had a couple folks ask about the steering wheels, so I will post those shortly - on the bedsides, I do know where one is that is real nice and rot free, but its 400.00....that is about what the nice bondo free ones run these days. Can ship on Greyhound COD and you pay Greyhound directly for shipping.

Not sure how nice of a bedside you need? might can find you a beater that needs repair for 250.00 or so....

Send PM if interested in pursuing either - thanks

Re: 1960-66 parts from big stash
 

Got another member who has verbally committed to buying it (I think) so let me check and make sure they do indeed want it, and if not I will let you know....

Will let you know if I find another one....

Re: 1960-66 parts from big stash
 

Looking for a V6 power steering pump reservoir - its the round style. Any chance you have one of those. Don't need the guts, just the reservoir because mine is pretty dented. I will take the whole thing if you have it though.

Re: 1960-66 parts from big stash
 

Im looking for a heater control assembly, mine is the three lever, (defrost, fan, heat) control. One of mine has broken off.

Re: 1960-66 parts from big stash
 

do you have a wiper motor i have a 64 but think 60- 66 would work

Re: 1960-66 parts from big stash
 

Looking for a passenger front fender...

Re: 1960-66 parts from big stash
 

I need a pair of good door cheks if you have them for 63.
Thanks

Re: 1960-66 parts from big stash
 

Do you have these mirrors? I need driver and pass. side. Thanks Andyboy

Re: 1960-66 parts from big stash
 

Do you have a 3spd shift linkage and related parts to take a 64 C10 back to column shift from aftermarket floor shift??:ito: Thanks

Re: 1960-66 parts from big stash
 

Any front windshield trim for 65 C10 ?