Cab for cuts, high hump,gauge cluster,uncut dash
 

cab for cuts. this is a decent cab all around,but someone lifted it by the roof and screwed up the drip rail pretty bad,so i will cut it up if you need anything off it. $25 for small cuts and $40 for bigger cuts plus the ride.

Also for sale

Uncut dash in nice shape. $75 plus the ride
Gauge cluster $60 shipped
High hump ( look at top edge of hole for minor damage in picture) $65 shipped

I also have an uncut white dash in same condition $75 plus the ride

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

How bad is the drip rail? Is it just the drip rail or is the roof bent also? There is a board member I was going to sell windshield posts to not very far from you that decided he was looking for another cab. You can buy just the drip rails as a repair part if thats all it needs. Just hate to see a good cab get chopped if it could be fixed. If its just the driprails I can call him before you chop it. LMK Frank

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Give me a minute and i will go take pictures. I think it can be fixed, but welding is not my forte'.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

I just sent him an E mail but I have a cell number too. he's about 86 miles from you.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

a couple floor supports will need to be replaced,and rocker panels, and drip rail issue. Other then that everything else is minor

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

The drip rail dosn't look to bad but the inner roof is a bit rough. He was looking for another cab because the roof and front pillers were bad on his. Is it just the inner roof that looks bad? How are the windshield piller posts? Thanks for the pictures and reply. I want to get him to talk to you directly,I kind of jumped in cause it seems like it it might be a good fit because of the proxcimity. I'll try and get him to look it up.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Pillars are excellent as far as i can tell. no rust and solid. There is a guy down the street from me who has 8 of these trucks at his tow company. I went there for the first time yesterday, and i will be going back on friday. I will see if any of his cabs are better and let you know

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

If you do decide to part out the cab I would like to talk to you about the hump. I am not in a hurry and will not push you to cut a cab that someone else needs whole. If the above deal falls apart let me know

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

My intention was to cut it up. The center hump? It bolts on and is for sale

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

If I dont get an E mail back by tomorrow I'll try and call him. That would be cool if you saw some others at that yard.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

I will let you know

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Hey Chevy072, I'm the guy Old Chevy Guy mentioned whose looking for the cab. That one looks like something I could use. How much for just the cab? I don't need the high hump, gauge cluster, pedal assemblies etc.. Just the cab.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Hold my place for the dash cluster. I'll get back to you by the end of the day. As apparent as it should be, does the cluster have faded chrome or painted aluminum?

***EDIT*** I see that its aluminum (silver). Are there any know defects? Especially with the bezel.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

The bezel is plastic. I just took it out and the circut board is seperated,and the back has surface rust on it. I have two more that i will take out later and post the pics of those for you.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

if you can do a postal money order I'll take the hump if you let me know. Thanks, Jim

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Thats fine. sending PM now

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Thanks! It needs to be the silver 7 hole. A tach would be a bonus.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

I will be cutting this cab up afterall. Let me know if you need anything

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Hans , I sent out the postal money order today

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

[QUOTE=hugger6933;5339737]Hans , I sent out the postal money order today[/QUOTE

Thanks. I will send it out right after i get it.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

let me know what you need cut off. dash for sale also $75 plus the ride,and i have two uncut dashes available

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

This cab will be scrapped on wednesday. There is lots of good metal on here. If you want a picture of a certain spot let me know and i will get asap. I hate to toss a titled cab,but I have no need for it.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

How are the rear corners of the floor?

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

They look good, I will get some pictures up in the A.M

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

going to the scrap yard very soon, The pictures of the back show what looks like rust. It is not rust,but the paint peeled off. the whole back is rust free, same with most of the floor and pillars and firewall.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

could you do 50 shipped for the high hump ?

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

High hump is sold sorry, I may have another one for you, I will let you know

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

How bout those cluster pics? I need a 7 hole with the wiper/lights stacked on the left for my 67. If thats the only one like that you have, how much?

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

I have all the clusters listed on a thread. They are pretty rough. Only one has a good curcuit board on the back. I will move the post to the top

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

How are the floor pans in the front both sides?

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

The previous owner skimmed over them with bondo i think and them painted over that. I will investigate a little more to see whats going on with it and get back to you

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

Pictures for " Sharpie"

Everything look great as far as this section goes from the roof seam down past where the top of the bed would be. Didn't notice any filler either and no dents.

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

The corners don't look to bad. I kno the main support that runs along the back is solid. Its hard to see the corners in these pics,but it gives you an idea

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

do u still have this cab?

Re: Cab for cuts, high hump,gauge cluster,uncut dash
 

No sorry. I thought i deleted this thread. What are you looking for?