|
1967 build laying bumper NO body drop!!
We are building a 1967 short box truck with as many 67-72 era parts as possible and modifiying what we need to, to get the air ride to lay the bumpers on the ground and ride height about 1"off the ground. You can check our progrees and shows we will be attending on Facebook at Kitsap Kustoms.
Other builds we are in the middle of are a 1969 suburban factory 3/4 ton 4x4 with many options and doing a 402 2 two wheel drive blazers one for SEMA and possibly Craig Jackson A 1972 super cheyenne mostly stock restore. and a custom crew cab longhorn 3/4 ton 4x4 402 with all original parts. |
Re: 1967 build laying bumper NO body drop!!
1 Attachment(s)
Fathers Day cruise ride height
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
short box frame and step side bed getting sand blasted
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
more bed and 3/4 1970 truck getting stripped for cab
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
original 402 getting rebuilt and used. Found two build sheets in the seat pretty cool
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
build sheets and blasting the frame and bed
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
sand blasting nothing fancy just getting it done
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
disk brake front 5 lug 3:73 posi axel factory 72 big block mounts
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
cnotch and 3' Z in the frame
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
got the back where we want it
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
cut sectioned and raised the center of the crossmember for ground clearance. New drop spindels, cut the front frame
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
3" Z in the front frame
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
got the height with frame we want with no motor or weight yet
|
Re: 1967 build laying bumper NO body drop!!
Hmmmmmmmmmmmmmmmmmmm......
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
bed cab and nose on. also put a fleet side bed on. Not sure which one to go with yet
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
engine in
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
body work welding up holes and got stock steel wheels
|
Re: 1967 build laying bumper NO body drop!!
I love the rear view mirror pic!! :metal:
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
motor tranny in tight but in and everything works. going for exhaust
|
Re: 1967 build laying bumper NO body drop!!
:c2::c2:
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
rear suspension going to exhaust
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
custom watts link. first show did a 30 mile poker run didnt quite make it had to work some bugs out. I mean tighten the lug nuts ;)
|
Re: 1967 build laying bumper NO body drop!!
5 Attachment(s)
Kustom Kulture show
|
Re: 1967 build laying bumper NO body drop!!
2 Attachment(s)
fathers day run 80 miles
|
Re: 1967 build laying bumper NO body drop!!
Looks good.I like those rims.
|
Re: 1967 build laying bumper NO body drop!!
Love the look of 67-68
|
Re: 1967 build laying bumper NO body drop!!
pot holes in the road here would make that a real challenge to drive, but is looks so schweet
|
| All times are GMT -4. The time now is 09:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com