The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)
-   -   SLIME Tire Sealant (https://67-72chevytrucks.com/vboard/showthread.php?t=539766)

dragginmetal 08-24-2012 02:10 PM

SLIME Tire Sealant
 
5 Attachment(s)
I’ve been putting Slime in my lawn mower tire every summer for about the last 4+ years. Well the tire finally had it. So since I had to change it, I thought some might want to see what it looks like inside the tire. Its pretty thick and not really that sticky. It has small hairs in it. Kinda reminds me of a dog poop after the dogs been chewing on carpet. :lol: Well anyway here’s some pics.

Attachment 975184

Attachment 975185

Attachment 975186

Attachment 975187

Attachment 975188

dragginmetal 08-24-2012 02:18 PM

Re: SLIME Tire Sealant
 
5 Attachment(s)
Attachment 975191

Attachment 975192

Attachment 975193

Attachment 975194

Attachment 975195

truckdude239 08-24-2012 03:18 PM

Re: SLIME Tire Sealant
 
man i hate that stuff with a passion in car tires it ruins the sensors for the tire pressure if it has them plus you can never balance a tire with it inside what i normally do with small lawn mower tires is install tubes if they leak down all the time

dragginmetal 08-24-2012 05:58 PM

Re: SLIME Tire Sealant
 
I wish I could have put a tube in it. This mower sat on flats for 5+ yrs. Then I just put some slime in it and aired it up. Tire went down every winter for another few years. Come summer, another bottle of slime. The side walls have dry cracks and are splitting all around. I figured a tube wont last long mowing 5 acres with mesquites growing up. What really kills me is the new tire cost $70 bucks then i had to mount it and a new one with a rim is only $5 dollars more. No one in town had one with a rim that would fit my mower. I had to change tires the old school way. Screwdrivers, pry bar, bumper jack, crow bar, soapy water. NOT fun.

truckdude239 08-24-2012 06:53 PM

Re: SLIME Tire Sealant
 
wow i paid 65 dollars a piece here for the same times installed on my boss mower with tube installed and that was mounted!!

bighaas79 08-24-2012 11:27 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by truckdude239 (Post 5555299)
man i hate that stuff with a passion in car tires it ruins the sensors for the tire pressure if it has them plus you can never balance a tire with it inside what i normally do with small lawn mower tires is install tubes if they leak down all the time

X2 Whoever invented that crap should be drug out in the street, beaten, and then shot. Not to mention the fact that some brands are actually explosive and flamable.

truckdude239 08-25-2012 08:40 AM

Re: SLIME Tire Sealant
 
yea some are flammable we found that out when i worked in the tire shop and a tire caught fire wile we where dismounting it scare the crap out of us

ETsC10 08-25-2012 10:27 AM

Re: SLIME Tire Sealant
 
Thanks for starting this thread dragginmetal.

Does the stuff ruin the wheel as well?
I had planned on using it on my stored trucks/cars but not now!

dragginmetal 08-25-2012 11:39 AM

Re: SLIME Tire Sealant
 
1 Attachment(s)
I can’t really say. This tire was trash years ago. The mower was “stored“ outside, uncovered, and water stands when it rains so I’m sure water and condensation was already inside it. The rim did have some rust and pitting on it but not as bad as I was expecting. …… On that note, I would not use it on any thing I cared about unless it was a absolute emergency. If someone uses it and wants to clean it off, lacquer thinner wipes it off like warm butter. I don’t know about cleaning a wheel sensor though. Here’s a pic of the rim.

Attachment 975589

bighaas79 08-26-2012 01:17 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by ETsC10 (Post 5556531)
Thanks for starting this thread dragginmetal.

Does the stuff ruin the wheel as well?
I had planned on using it on my stored trucks/cars but not now!

I think it may depend on the brand but yes they can corrode the heck out of the rims. And no you don't want to put it in a stored vehicle.

bighaas79 08-26-2012 01:21 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by dragginmetal (Post 5556650)
I don’t know about cleaning a wheel sensor though. Here’s a pic of the rim.

Attachment 975589

There is no cleaning of a tire sensor. If that stuff is put into into a tire with a sensor, you just killed it. Actually the tire sensors don't like really any type of moisture at all.

truckdude239 08-30-2012 08:40 PM

Re: SLIME Tire Sealant
 
fix a flat will ruin a regualr tire too it leaves a chemical residue in teh tire so a pacth and glue wont stick

ETsC10 08-30-2012 09:15 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by truckdude239 (Post 5566780)
fix a flat will ruin a regular tire too it leaves a chemical residue in the tire so a patch and glue wont stick

Ewwwwww...guess I'd best s-can the can of fix-a-flat that's in my cab!

dragginmetal 08-31-2012 12:02 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by truckdude239 (Post 5566780)
fix a flat will ruin a regualr tire too it leaves a chemical residue in teh tire so a pacth and glue wont stick

The Slime leaves that same residue. It's like a real light weight oil residue.

Torrey72 09-04-2012 05:40 AM

Re: SLIME Tire Sealant
 
Wow, that is hard core nasty. I'll try tubes in my mower tires. I have the same bleed down problem.

77c10 09-06-2012 02:21 PM

Re: SLIME Tire Sealant
 
I put a can of Slime in a trailer tire one time. Long story short, the tire blew out on me later on and I had to actually cut the tire off the rim! The tire store could not get it off.

leddzepp 09-06-2012 02:33 PM

Re: SLIME Tire Sealant
 
I use Slime on all my bicycle inner tubes, and use their liners between the tire and inner tube. I love it. No more flats.

I have never used it on a car tire.

Gumby 09-07-2012 01:24 AM

Re: SLIME Tire Sealant
 
It does work well, my mountain bike hasn't had a flat in well over 10 years.

have sealed up tires with constant slow leaks with it well.


but yes it some nasty stuff when you take a tire off.

only 1 tire it could never seal a slow mystery leak, popped the tire off the bead and ran some clear silicone around both sides. no more slow leak.

Axle 09-16-2012 01:55 PM

Re: SLIME Tire Sealant
 
Quote:

Ewwwwww...guess I'd best s-can the can of fix-a-flat that's in my cab!
As long as you use it for its intended purpose (middle of nowhere, already used your spare tire, and have to get back to civilization) you'll be fine.

Alex.

cableguy0 09-16-2012 08:52 PM

Re: SLIME Tire Sealant
 
You CAN"T blame slime for the way that wheel looks. That tire needed to be replaced probably 7 years ago. There was obviously grass caked inside the wheel from the tire being flat. Most of your mess is old grass. If the slime got you out of buying a tire for 4 years whats the issue?

dragginmetal 09-16-2012 09:34 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by cableguy0 (Post 5596059)
You CAN"T blame slime for the way that wheel looks. That tire needed to be replaced probably 7 years ago. There was obviously grass caked inside the wheel from the tire being flat. Most of your mess is old grass. If the slime got you out of buying a tire for 4 years whats the issue?

I'm not blaming slime for anything. I changed the tire and posted pics of what it looked like inside after using slime so people could see...... Nope no grass. Thats all slime. I have tons more pics if u need them.......Only issue i have was the price of a new tire, and like stated above, u might have some problems if using in a automobile tire.

ETsC10 09-17-2012 10:28 AM

Re: SLIME Tire Sealant
 
Easy now cowboys.

It's good of Mike to review his findings...I'd rather read it than experience it.

I just finished reviewing Slime's MSDS and it appears this stuff is fairly safe
considering some of the compounds we use around our garages.

Considered non-toxic, non-flammable, (flash point > 93.3°C / 200°F.
It is fairly alkaline (8.8 pH, not unlike the hard tap water some folks have).
It does say that it can react violently if in contact with acids and oxidizing
agents
(much the same can be said about the baking soda we store in the
fridge). Use caution when choosing a cleanup product on this stuff.

One thing Mike did mention was the oily residue it left. The MSDS touches
on this feature in the spill response section as it's being quite slick on hard
surfaces. I would think you would want to avoid getting it on any pavement
where you would want to walk or drive.

Non-toxic but don't eat it.
Wash your hands after use.
Don't get it in your eyes.
If wearing gloves, they
recommend nitrile or neoprene.
DO NOT use latex gloves.
Don't inhale it just because.

Don't throw the empty can in the bonfire. :dohh:

Mr Pops 09-17-2012 11:16 AM

Re: SLIME Tire Sealant
 
I bought a new riding mower this spring for my 3 acres and I've put 8 plugs in one of the front tires so far. I was wondering if there's anything that I could spray inside the tire to just make it solid..? Like spray foam or something..:confused:

dragginmetal 09-17-2012 12:12 PM

Re: SLIME Tire Sealant
 
Mr. Pops, they make foam for tires. It gets rock hard. I havent used it yet but i've been trying to find it local, with no luck. I have seen it online but im not big on ordering online. Might end up having to tho. Ill see if i can find the link to it for you

dragginmetal 09-17-2012 12:18 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by ETsC10 (Post 5597069)
Easy now cowboys.

My apologies. I should have had a better response.

Mr Pops 09-17-2012 12:19 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by dragginmetal (Post 5597213)
Mr. Pops, they make foam for tires. It gets rock hard. I havent used it yet but i've been trying to find it local, with no luck. I have seen it online but im not big on ordering online. Might end up having to tho. Ill see if i can find the link to it for you

Sounds like just what I need! Thanks. I'll let you know if I find any

dragginmetal 09-17-2012 12:42 PM

Re: SLIME Tire Sealant
 
Have a look at this.
http://www.airfreetires.com/foamfill/default.asp

Mr Pops 09-17-2012 12:53 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by dragginmetal (Post 5597265)

Maybe I'll drop by my local UFA farm supply and see what they got

Liz 09-17-2012 02:27 PM

Re: SLIME Tire Sealant
 
thank you Mike. CG is blunt, he usually intends no harm. Jason... don't make me ;)

dragginmetal 09-17-2012 02:32 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by Liz (Post 5597443)
thank you Mike. CG is blunt, he usually intends no harm. Jason... don't make me ;)

No problem. No harm no foul. It's all good.

cableguy0 09-17-2012 07:53 PM

Re: SLIME Tire Sealant
 
No harm meant. As Liz said Im blunt and state opinions freely. Just curious now about what in that bottle of slime turned into the fabric looking mess that you have.

Mr pops what the hell is in your yard that you put 8 holes in a mower tire?? lol. Nail factory? I dont think I have put 8 plugs total in a vehicle since I have been driving. You must have some real harsh grass lol No playing in your yard.

Mr Pops 09-18-2012 12:14 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by cableguy0 (Post 5597927)
Mr pops what the hell is in your yard that you put 8 holes in a mower tire?? lol. Nail factory? I dont think I have put 8 plugs total in a vehicle since I have been driving. You must have some real harsh grass lol No playing in your yard.

I mow around and under a bunch of parts trucks that are in various stages of being dismantled, also I tore down a few old sheds last year and there was a bajillion nails on the ground that I keep finding with a rake and magnet roller.. and my tires.. lol

dragginmetal 09-18-2012 09:02 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by cableguy0 (Post 5597927)
No harm meant. As Liz said Im blunt and state opinions freely. Just curious now about what in that bottle of slime turned into the fabric looking mess that you have.

No problems. Were good. ...... I all ready through the bottle away so I can’t look at the label to see if it says what type material it is. Just guessing, I’m thinking its in there for structural support. Kind of like short/long strand fiberglass.

ETsC10 09-18-2012 09:40 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by Mr Pops (Post 5598533)
I mow around and under a bunch of parts trucks that are in various stages of being dismantled, also I tore down a few old sheds last year and there was a bajillion nails on the ground that I keep finding with a rake and magnet roller.. and my tires.. lol

Mr Pops, it sounds like you need to mount a couple cow magnets to the front of your mower! :lol:

Restrorob 09-18-2012 10:48 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by dragginmetal (Post 5598848)
I’m thinking its in there for structural support.


That's what it's for Mike, It's paper/cardboard fibers to help keep the sealer stuck to the inside of tire.

Yes this stuff does promote moister/condensation inside of the tire which causes the rim to rust, It's one of the trade off's of not having flat tires all the time.

We buy it in 5 gal buckets for mower tires but I'd never put it in a ATV/automotive tire because of higher speed balance issues, Oh.... Like the mess you had to deal with, I charge extra for dealing with it during tire replacements.....

Axle 09-18-2012 05:23 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by Mr Pops (Post 5597135)
I bought a new riding mower this spring for my 3 acres and I've put 8 plugs in one of the front tires so far. I was wondering if there's anything that I could spray inside the tire to just make it solid..? Like spray foam or something..:confused:

Call around your local tire shops, (and battery places. The local independent is a "battery" shop by name, but tire place first who've found forklift stuff to be a nice addition to their buisness) to see if they do forklift tires. Those often get filled with a foam that sets. Comes in 55 gallon drums, goes in by weight for a given tire size.

Alex.

Mr Pops 09-18-2012 11:33 PM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by ETsC10 (Post 5598893)
Mr Pops, it sounds like you need to mount a couple cow magnets to the front of your mower! :lol:

Yeah no kidding. I think I might buy a few big magnets to throw under my yard car..

Quote:

Originally Posted by Axle (Post 5599553)
Call around your local tire shops, (and battery places. The local independent is a "battery" shop by name, but tire place first who've found forklift stuff to be a nice addition to their buisness) to see if they do forklift tires. Those often get filled with a foam that sets. Comes in 55 gallon drums, goes in by weight for a given tire size.

Alex.

Good info thanks. I'll look into it.

dragginmetal 09-19-2012 08:12 AM

Re: SLIME Tire Sealant
 
Quote:

Originally Posted by Restrorob (Post 5599006)
It's paper/cardboard fibers to help keep the sealer stuck to the inside of tire.

I would have never guessed that. I was thinking maybe cotton fibers. … Fixing flats with paper mache. There’s something you don’t think about every day.:lol:


All times are GMT -4. The time now is 09:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com