Factory big block parts
 

Parting out a 1971 Big Block Super Cheyenne !!!!

**** MORE PARTS ADDED!!!! ****

Clearing out some parts I know I'm not going to use:

shifter rod - $30
All 6 fender emblems (2 Super, 2 Cheyenne and 2 V8 400) - $75
Big Block Lower alternator bracket - $45
Factory Flex flan - $25
Tag bracket - $30
a/c battery box - $45
cargo light and interior switch $45.

67-71 Big Block Motor mounts and stands $150 ** SOLD to KEFFER ***
In bed spare tire carrier - $50 ** SOLD to Bronze 72 **
Dual TanK selector switch ** SOLD to JOCKO **
Fan shroud - $75 ** SOLD to 70STOVEBOLT**
Passenger side heat shield - $30 ** SOLD to 70STOVEBOLT**
Sport bumper brackets - $45 ** SOLD to ROCKC **
Glove box door - $75 ** SOLD to TOO MUCH STUFF **

If you need anything not mentioned, please ask.

All prices are + shipping.

Re: Factory big block parts
 

do you have any pics of the fender emblems please?

Re: Factory big block parts
 

This is the best I have right now. I'll have some better pictures tomorrow.

Re: Factory big block parts
 

is it a super? or custom?
if you're parting the truck i need a uncut a/c dash for the wall

Re: Factory big block parts
 

It's a Super with factory A/C.

Re: Factory big block parts
 

cool, if you part it out keep me in mind for the dash please. looks uncut in the pic. dont need the GBox door or center vent but would like the 2 ball vents.

Re: Factory big block parts
 

I think it may be cut....

Re: Factory big block parts
 

Pics of shroud and heat shield, and price shipped to 46562 please.

Thanks,
Mark

Re: Factory big block parts
 

Interested in cuts for the fresh air vents and around the blower motor hole if rust free.

Re: Factory big block parts
 

I think it may be cut....

i'll pass thanks

Re: Factory big block parts
 

is the tilt column for sale?

Re: Factory big block parts
 

I would be interested in the glovebox door emblem..

gmc 2500 4x4, no big block 4x4 were built.

Re: Factory big block parts
 

I'd be interested in the water pump pulleys (other pulleys too). Also may be interested in exhaust manifolds and exhaust hangers.

Re: Factory big block parts
 

Here's pictures of the shroud. The only blemish I see is on the bottom of one of the holes. I'll get pictures of the heats hield tomorrow. $135 shipped.

I'll take some pictures tomorrow.

I haven't decided if I want to get rid of it yet.

I would rather sell the whole door, I don't want to break the emblem taking it off, :lol:. Here's pictures.

Dan - no motor pulleys or exhaust manifolds. I do think it has the exhaust hangers, I'll look and let you know.

Re: Factory big block parts
 

Thanks Rob.
Posted via Mobile Device

Re: Factory big block parts
 

How much for the glovebox door?
And what condition is the tag on back?

Re: Factory big block parts
 

If the last guy passes on the glove box door, I'll take it. Shipping to 97050. Mike.

Re: Factory big block parts
 

Rob, I didn't realize you had the whole truck. Are you parting the chassis or will you sell the front coil springs?

Re: Factory big block parts
 

Mark pictures of the shroud and heat shield have been posted. Let me know.

Here's a picture of the firewall. I'll have to remove some pieces to see it better.

It was, :(. Here are the pictures of the emblems. Let me know.


Dan - no pulleys. I think I saw 2 exhaust brackets that look like they were riveted on....

TMS & Bronze 72 - Here are pictures of the glove box door (front and back). I'll take $90 shipped. LMK.

Re: Factory big block parts
 

Here's the pictures of the fender emblems. LMK

Re: Factory big block parts
 

I will pass on the firewall section. I just recently saw that i can buy the whole piece I need new. Sorry Rob.

Re: Factory big block parts
 

Engine long gone?
Posted via Mobile Device

Re: Factory big block parts
 

Any pics of theps pump, brackets, and reservoir? Thanks, Greg
Posted via Mobile Device

Re: Factory big block parts
 

No worries. Let me know if there is anything else you need. I'll be cutting the cab and bed up.

Unfortunately yes....:waah:

Here you go:

Re: Factory big block parts
 

I will take rear sport bumper brackets if original.

Re: Factory big block parts
 

They are original. Here's a couple of pictures.

Re: Factory big block parts
 

Rob, I'll take the rear sport bumper brackets. Shipping to 70512 . Thanks
Posted via Mobile Device

Sorry , didn't see rockc's request for them . Put me next in line .

Re: Factory big block parts
 

How much total 82210 and how pay?

Re: Factory big block parts
 

Sorry Chris, he beat you by 4 mins!

Rock - How about $60 shipped. Paypal is robhartley@aol.com (Please add 3% to cover fees). I probably won't get these pulled until next weekend. Thanks,

Rob

Re: Factory big block parts
 

Payment and PM sent.
Thanks
Rock C

Re: Factory big block parts
 

Hello...are the stands '72?..would you separate the stands and the mounts? If so, how much? If you cant, I understand. Thanks, Greg
Posted via Mobile Device

Re: Factory big block parts
 

Thanks Rock!

Greg the stands came on the 68-71 BB trucks. They will work on a 72, but they are not period correct ones. 72 has a bigger stand and the clam shell mounts. Very similar to the 73-up BB mounts. Let me know.

Rob

Re: Factory big block parts
 

hello,
What shape is cab,bed and tailgate in??
Do you have better pics.?


thanks,
Betty

Re: Factory big block parts
 

Pics and price for gas pedal assembly shipped to 35555.

Thanks,
Danny

Re: Factory big block parts
 

Betty - the cab is pretty rough. It's got rust in the rockers, floor boards and the upper roof inside the cab. I think it's only good for some patch panels. The bed is pretty solid. I plan on using the floor and wheel tubs for my son's truck. The bedsides are salvagable but have rust over the wheel openings. The tailgate is perfect!!! EXCEPT ... for the rust on the inside lower bottom :waah:. It would take another tailgate with a good lower section to fix it. But it's straight as an arrow!!! If some doesn't buy it, I will probably make some wall art out of it, :D.

Re: Factory big block parts
 

Danny - $60 shipped. Here's some pictures.

EDIT: Pictures of the a/c battery box and the in-bed spare tire carrier.

Re: Factory big block parts
 

I would be in at $50 shipped on the glovebox door. If that works, let me know. Thanks for the pics.

Re: Factory big block parts
 

I would take $65 shipped. LMK

Re: Factory big block parts
 

Bump! More parts and pictures added.

Re: Factory big block parts
 

Rob, got a price on the engine stands? Don't need the mounts, unless you don't want to separate them. Also, do you have the clips for the shroud?
Thanks,
Mark