The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)
-   -   Well I bascially got my pad build for my building (https://67-72chevytrucks.com/vboard/showthread.php?t=562776)

teeitup 01-25-2013 09:37 PM

Well I bascially got my pad build for my building
 
3 Attachment(s)
I had to haul in 38 loads of clay to get it leveled up, 19 hours in a dump truck, about drove me crazy, then I had to spread and pack it. Planning on a 36x44 pole style metal building, with 16x8 and 9x8 garage doors in the east gable end and one walk in door, no windows. Have a buddy giving me a break on concrete and a buddy giving me a break building it. Then hopefully by next winter I will have it insulated and finish the inside and heater installed. Having a issue with a bowed power pole, the electric company says its the telephone companies, both have their lines on it. The electric company won't let me build on pad till they get it all straightened out. you can see the pole in first 2 pics, it has a 5 foot bow

teeitup 01-25-2013 09:38 PM

Re: Well I bascially got my pad build for my building
 
3 Attachment(s)
Had a little trouble, see the gate in 2nd pic, I was packing the clay with a loaded dump truck, got too far over the edge and down I went into the gate and fence, woops!!!!! Oh well I was going to move gate and fence anyway, lol

pritch 01-25-2013 09:57 PM

Re: Well I bascially got my pad build for my building
 
Looks good! It'll look even better with a concrete slab on it:metal:

Looks to me like the 1st pole in your fourth picture is pulling yours over. As long as the wires are not directly over the top of your building, I can't see what their beef is.

lolife99 01-25-2013 10:01 PM

Re: Well I bascially got my pad build for my building
 
Congrats on getting started!

teeitup 01-25-2013 10:03 PM

Re: Well I bascially got my pad build for my building
 
Thanks guys, I'm hoping we can get it going why the weather is decent. The electric company guy says I have to be 10 foot away from their power lines, when I'm looking up from building, I moved the building 3 feet south already, but thats as far as I can go, I had to get a variance to go that far.

ETsC10 01-26-2013 11:11 AM

Re: Well I bascially got my pad build for my building
 
Holy cow, that's a lot of fill. No wonder you're exhausted!

Funny how qwerky stuff like that pole can cause so much
problem with moving forward. Would be an awful shame
if that pesky dump truck got away again and hit a pole...:dohh:




.

teeitup 01-27-2013 12:42 AM

Re: Well I bascially got my pad build for my building
 
Thanks Ellen, I told my wife what you said about about the dump truck and pole, she thought it was a good idea:lol:

PanelDeland 01-27-2013 02:02 PM

Re: Well I bascially got my pad build for my building
 
I would send the power company a letter.State start date on building and see what they say.Otherwise,they may be couple years fixing it.If you can figure out a polite way to tell them you will charge them for any building delay it might help.

paintman 01-27-2013 07:54 PM

Re: Well I bascially got my pad build for my building
 
Just be grateful that you don't live in New Jersey like I do! If you tried to truck in 38 loads of clay in this state it would cost you 50K for soil inspections, soil erosion prevention, and topography engineering. That's just in hopes of obtaining local permits. Plus if you lived anywhere near water all bets are off. That is unless your a local politician. Then you can do anything you want.:cuss:

teeitup 01-29-2013 09:24 PM

Re: Well I bascially got my pad build for my building
 
Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is

hayhauler71 01-29-2013 09:57 PM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by teeitup (Post 5854598)
Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is

Tell both it is yours and take care of it with the dump truck

pritch 01-29-2013 10:05 PM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by teeitup (Post 5854598)
Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is


Kansas, huh. Don't you guys have those freak tornados that can crop up in the middle of the night and blow a chain saw right thru a power pole? I see that all the time on the news:lol::lol::lol:

ETsC10 01-29-2013 11:52 PM

Re: Well I bascially got my pad build for my building
 
:haha:

zicc1835 01-30-2013 01:00 AM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by paintman (Post 5848312)
Just be grateful that you don't live in New Jersey like I do! If you tried to truck in 38 loads of clay in this state it would cost you 50K for soil inspections, soil erosion prevention, and topography engineering. That's just in hopes of obtaining local permits. Plus if you lived anywhere near water all bets are off. That is unless your a local politician. Then you can do anything you want.:cuss:

this is all the truth:ito: good luck with the BIG build Randy hope to get to meet you in my travels

bodyman922 02-16-2013 11:22 PM

Re: Well I bascially got my pad build for my building
 
I would ask both companies for a legal document proving they do not own the pole. That way you have legal proof they do not want to fix their problem. Put up your building and if they complain you can show them they have released their rights in the situation allowing you to build without their concern.

thelonerife 02-17-2013 02:13 AM

Re: Well I bascially got my pad build for my building
 
If no one says its theirs I'd start building. Let them worry about it when it falls.

DesertCat 02-17-2013 03:54 AM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by teeitup (Post 5843457)
Thanks guys, I'm hoping we can get it going why the weather is decent. The electric company guy says I have to be 10 foot away from their power lines, when I'm looking up from building, I moved the building 3 feet south already, but thats as far as I can go, I had to get a variance to go that far.

So has the power company stalled your building permit? In your first post you said they wouldn't let you build on your pad until it was resolved. How?

I'm tracking with Bodyman922's comments, if it were me I would have my lawyer write them both a letter. Wouldn't cost much and they are far more likely to take action when they know you are serious.

Usual disclaimers - not a lawyer, have no money, fighting a dry skin condition, work in a train wreck of a country...

teeitup 02-17-2013 10:19 AM

Re: Well I bascially got my pad build for my building
 
Sorry guys I was gone 6 days, got a call before I left and forgot to reply on this thread. Electric company is staking claim to it now and are going to put up a new pole, BUT the guy says it may be 6 weeks to do that and still won't let me start on building. It really sucks because the weather hasn't been that bad here and my guy could of had most of it up by now

teeitup 02-19-2013 07:19 PM

Re: Well I bascially got my pad build for my building
 
2 Attachment(s)
WOO HOO got the pole set today, but now its supposed to start snowing here tomorrow night, they are saying 10-15 inches, thats just great!!!!!!! It might be spring now before we get it started. If they would of got the pole deal straightened out weeks ago, we could of had the garage up by now. Here are pics of new pole and the old pole cut off some beside it

teeitup 03-03-2013 10:21 PM

Re: Well I bascially got my pad build for my building
 
3 Attachment(s)
Got the laminate poles sat in the ground today, hopefully concrete buddy will get it poured this week

zicc1835 03-04-2013 12:53 AM

Re: Well I bascially got my pad build for my building
 
progress .....keep the pics coming

DesertCat 03-04-2013 11:48 AM

Re: Well I bascially got my pad build for my building
 
Cool! Now get back to work!

teeitup 03-05-2013 09:07 PM

Re: Well I bascially got my pad build for my building
 
Zicc1835, more pics Wed after work
Desertcat, it seems thats all I've been doing;)

Got the drain put in today and most of the poles extended up to 10 foot, my buddy Rod is putting gerts on and finishing poles tomorrow. Concrete guy is coming to set it all up and put sand in tomorrow and they planning on pouring Fri morning. Trusses are coming Mon, I have to figure out how we are going to put up the gable truss on the west side, he said it weighs 300#'s, so I don't think we can lift it up there by hand, I may have rent a boom truck (unless you guys have any other ideas) we won't be able to drive on concrete with backhoe. My boss is coming back tomorrow so I won't be able to help him as much on building till I get off work:waah:
Its getting there though, very happy with it all so far, wish it was done though:lol:

shortbed70 03-05-2013 10:58 PM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by pritch (Post 5854719)
Kansas, huh. Don't you guys have those freak tornados that can crop up in the middle of the night and blow a chain saw right thru a power pole? I see that all the time on the news:lol::lol::lol:

Hahaha... Yes we do! I would insert angry beaver vs chainsaw though... So what size dumptruck were you driving? That's alot of clay...
Posted via Mobile Device

71swb4x4 03-05-2013 11:12 PM

Re: Well I bascially got my pad build for my building
 
Looking good Randy!!

rambler 03-06-2013 12:34 AM

Re: Well I bascially got my pad build for my building
 
looks like good progress so far,, amazing how that pole replacement went from 6 weeks to 2 days !

teeitup 03-06-2013 06:13 PM

Re: Well I bascially got my pad build for my building
 
2 Attachment(s)
Troy, single axle ford dump truck and yes it was alot of clay and I need a few more on the north slope

Shawn, Thanks

Joe, Thanks, it actually took weeks to get the pole set, but its all OK now

More pics as of today. Also I went and bought 24 eight foot 2 bulb florescent light fixtures and bulbs today and also a Raznor 160,000 BTU overhead natural gas heater from a guy who was tearing down a big business in north Topeka, All are working order. Lights were $300 for all and heater was $250, and its 1 year old.

pritch 03-07-2013 12:12 AM

Re: Well I bascially got my pad build for my building
 
I used a duct jack to set my trusses on my shop. That may be an option for that gable end. They are usually rated for at least 500 pounds, and should be available at most rental yards.

http://www.bing.com/images/search?q=...acks&FORM=IGRE

teeitup 03-07-2013 07:13 PM

Re: Well I bascially got my pad build for my building
 
Thanks Pritch, called today, $40 a day can't beat that. Wow my back feels better already;)

DesertCat 03-07-2013 07:37 PM

Re: Well I bascially got my pad build for my building
 
Looking good! Cool that you are doing so much of the work yourself and knowing that some things you don't want to :lol: I look forward to the day I will hopefully get to do the same. Congrats! Happy for you. ;)

pritch 03-07-2013 11:51 PM

Re: Well I bascially got my pad build for my building
 
Glad to help out. That's going to be a nice shop. :metal:

_Ogre 03-08-2013 03:24 PM

Re: Well I bascially got my pad build for my building
 
well done, you got a smoking deal on the lights and heater.
used building stuff is hard to sell, being in the right place at the right time is everything :D

29od1 03-08-2013 05:30 PM

Re: Well I bascially got my pad build for my building
 
Looks like you're coming along Randy! I have a 150kBtu Reznor in my 40 x 60 and it heats it up fast. But I paid about 4 times what you did for it :waah:

Everybody starts jonesing for parts when you take on these projects. Can't you fit a truck or two inbetween for everyone?

teeitup 03-08-2013 08:27 PM

Re: Well I bascially got my pad build for my building
 
5 Attachment(s)
DesertCat, Thanks, this is my third time building a shop, I always wish they were done after awhile;)

Pritch, your info was great!! Thanks

_Ogre, your right I was lucky, Thanks

David, this has me wore down, truck stuff is on back burner and actually may end up being on back burner for good in the future. The golf course deal may go through quicker than I thought it would. Be sure to stop by next time you come up, Thanks

Here are some more pics, got the concrete done today, sitting trusses Tues.

Thanks Randy

teeitup 03-08-2013 08:28 PM

Re: Well I bascially got my pad build for my building
 
4 Attachment(s)
I am really happy with what has got done in 6 days, Thanks Randy

lolife99 03-08-2013 08:50 PM

Re: Well I bascially got my pad build for my building
 
Looks good!
Keep at it.

zicc1835 03-08-2013 08:57 PM

Re: Well I bascially got my pad build for my building
 
WOW thats really coming along and looks great

shortbed70 03-09-2013 08:52 AM

Re: Well I bascially got my pad build for my building
 
Looking good!! You'll be tearing apart trucks and have stuff stashed everywhere in no time... Lol
Posted via Mobile Device

rmvlt1100 03-09-2013 01:17 PM

Re: Well I bascially got my pad build for my building
 
Quote:

Originally Posted by teeitup (Post 5935191)
I am really happy with what has got done in 6 days, Thanks Randy

Very nice. That is going to be the perfect size where a guy could go and not be seen for weeks. And that a lot of concrete you got there.
Posted via Mobile Device
Posted via Mobile Device

teeitup 03-10-2013 08:10 PM

Re: Well I bascially got my pad build for my building
 
Thanks guys. We didn't get anything done this weekend, I had a pool tourney Sat and it also rained all day and today it was cold and windy. Still planning in setting trusses Tues. Thanks again, Randy


All times are GMT -4. The time now is 03:12 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com