The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - CA 72 Blazer part out (https://67-72chevytrucks.com/vboard/showthread.php?t=620237)

72 Blazer part out

Re: 72 Blazer part out

Interested in wheel wells let me know price, thanks

Re: 72 Blazer part out

I like to buy that booster bracket from you. Circled in red.

Re: 72 Blazer part out

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded
2) firewall to rear wire harness
- any cuts or breaks?
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

Re: 72 Blazer part out

Interested in the last 4 or 5 inches of the bed/deck leading up to the tailgate.

Thanks, Brad

Re: 72 Blazer part out

Quote:

Originally Posted by JimH2828 (Post 6570096)

If Jim passes on the rear side panel pieces I will take them

Bob

Re: 72 Blazer part out

I see that you have several 67-72's. Would you happen to have a passenger side sport mirror?

Thanks.

Re: 72 Blazer part out

Interested in this section. Thanks - Tony

Re: 72 Blazer part out

Interested in both front floor sections if they are solid.. Does the passenger have some extra holes drilled in it?

Re: 72 Blazer part out

On second thought, if shipping is doable, I really need to get the back half of the rear deck. So I'll revise my request to: interested in the deck mid wheel well to tailgate shipped to 30622 vs. just the last 5 inches leading to the tailgate.

Thanks,

Brad

Re: 72 Blazer part out

how much for the interior cargo panel metal brackets on side walls and floor.

Re: 72 Blazer part out

Metal bracket for vacum canister on ac housing shipped to 48817

Re: 72 Blazer part out

$80 plus the ride...

Quote:

Originally Posted by doo142 (Post 6570010)

Interested in wheel wells let me know price, thanks

Re: 72 Blazer part out

$22 plus the ride....

Quote:

Originally Posted by asolde (Post 6570020)

I like to buy that booster bracket from you. Circled in red.

Re: 72 Blazer part out

Please clarify these before I can price...
1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded

I will confirm condition and let you know

2) firewall to rear wire harness
- any cuts or breaks?

$15.00 shipped if going with other items

3) Rear bench rear hold down bracket and bolt

Quote:

Originally Posted by JimH2828 (Post 6570096)

Re: 72 Blazer part out

Here's the rear panel brackets I was interested in. The center ones should only be held in place with screws. The side ones may be tack welded, not sure.

Attachment 1226546 Attachment 1226548

Thanks
Jim

Re: 72 Blazer part out

second inline...noted

Quote:

Originally Posted by Sandemonium (Post 6570204)

If Jim passes on the rear side panel pieces I will take them

Bob

Re: 72 Blazer part out

If Greyhound is an option for you...$100 for the cut and what ever Greyhound would be...

Adam

Quote:

Originally Posted by IronCanine (Post 6570317)

Re: 72 Blazer part out

Might have another above you wanting a couple of those....will see what he says first.

Quote:

Originally Posted by 1972 Jimmy (Post 6570324)

how much for the interior cargo panel metal brackets on side walls and floor.

Re: 72 Blazer part out

$21.50 shipped

Quote:

Originally Posted by cst204x4 (Post 6570447)

Metal bracket for vacum canister on ac housing shipped to 48817

Re: 72 Blazer part out

11 brackets total, $100 shipped, and will do combined shipping if the wiring harness and other request are a done deal.

Quote:

Originally Posted by JimH2828 (Post 6570626)

Re: 72 Blazer part out

Quote:

Originally Posted by budnikguy (Post 6570690)

If Greyhound is an option for you...$100 for the cut and what ever Greyhound would be...

Adam

That'll work for me assuming GH is not outrageous. You can PM info. Thanks. Brad

Re: 72 Blazer part out

Can you send a picture(s) of all the parts off and together, so I can determine condition? No rush, when ever time allows.

Thanks
Jim

Re: 72 Blazer part out

OK, let me get to tearing this thing apart and get a quote from Greyhound...

Quote:

Originally Posted by IronCanine (Post 6570720)

That'll work for me assuming GH is not outrageous. You can PM info. Thanks. Brad

Re: 72 Blazer part out

More than fair...let me get to tearing it down!

Quote:

Originally Posted by JimH2828 (Post 6570724)

Can you send a picture(s) of all the parts off and together, so I can determine condition? No rush, when ever time allows.

Thanks
Jim

Re: 72 Blazer part out

I'll take them , can you verify condition ? They look straight and rust free. Ship is to 46507 , thanks!

Re: 72 Blazer part out

I'd be interested in both side vent boxes also

Re: 72 Blazer part out

I do, $40 shipped....

http://i163.photobucket.com/albums/t...psap5mo4nx.jpg

http://i163.photobucket.com/albums/t...pssdwouxrr.jpg

Quote:

Originally Posted by JJH Jimmy (Post 6570215)

I see that you have several 67-72's. Would you happen to have a passenger side sport mirror?

Thanks.

Re: 72 Blazer part out

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

Quote:

Originally Posted by tdkosta (Post 6570216)

Interested in this section. Thanks - Tony

Re: 72 Blazer part out

I will look for any extra holes in the floor and let you know....are you wanting complete floors? If you could supply a photo of where you would want the cuts from also...ty

Quote:

Originally Posted by tjsblazer (Post 6570287)

Interested in both front floor sections if they are solid.. Does the passenger have some extra holes drilled in it?

Re: 72 Blazer part out

I will begin removal tomorrow and continue into the weekend....

Quote:

Originally Posted by doo142 (Post 6571596)

I'll take them , can you verify condition ? They look straight and rust free. Ship is to 46507 , thanks!

Re: 72 Blazer part out

Quote:

Originally Posted by budnikguy (Post 6571791)

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

No I don't need it to wrap around and include the taillight, just up to the edge is fine.

Re: 72 Blazer part out

Quote:

Originally Posted by budnikguy (Post 6570700)

$21.50 shipped

Sounds good I'll take the ac bracket PayPal? Pm me payment info

Re: 72 Blazer part out

Quote:

Originally Posted by budnikguy (Post 6571787)

I do, $40 shipped....

http://i163.photobucket.com/albums/t...psap5mo4nx.jpg

http://i163.photobucket.com/albums/t...pssdwouxrr.jpg

I will take it. PM me payment details and I will send payment in the morning.

Thanks.

Re: 72 Blazer part out

Quote:

Originally Posted by budnikguy (Post 6572551)

pm sent...

PM and payment sent. Thank you.

Re: 72 Blazer part out

There are 4 holes on driver and passenger side in the foot well area..maybe a fires extinguisher or something mounted there at some point...here are more detailed pics

http://i163.photobucket.com/albums/t...psghwgm9lt.jpg

http://i163.photobucket.com/albums/t...psobtqqrba.jpg

Quote:

Originally Posted by budnikguy (Post 6571813)

I will look for any extra holes in the floor and let you know....are you wanting complete floors? If you could supply a photo of where you would want the cuts from also...ty

Re: 72 Blazer part out

Working on getting them removed, most likely Saturday. Did remove the wiring..looks good!

http://i163.photobucket.com/albums/t...psmirn28sk.jpg

http://i163.photobucket.com/albums/t...pszfjqzevm.jpg

http://i163.photobucket.com/albums/t...psm8co8qch.jpg

http://i163.photobucket.com/albums/t...psywkxvaz1.jpg

http://i163.photobucket.com/albums/t...psyvdkiwjh.jpg

http://i163.photobucket.com/albums/t...psbukcsvzf.jpg

Quote:

Originally Posted by JimH2828 (Post 6570724)

Can you send a picture(s) of all the parts off and together, so I can determine condition? No rush, when ever time allows.

Thanks
Jim

Re: 72 Blazer part out

Pics of vent boxes...

http://i163.photobucket.com/albums/t...psc76hhhda.jpg

http://i163.photobucket.com/albums/t...psnbkxpfxc.jpg

Quote:

Originally Posted by doo142 (Post 6571602)

I'd be interested in both side vent boxes also

Re: 72 Blazer part out

Sorry to confuse, I need the sheet metal box those doors vent to. On pass. Side I need to wrap around up to first opening in cowl.