'69 lifted k10 build
 

so im only 16, got this truck a couple weeks back, and well its a LOW buck build, so far all ive done is take stuff apart, and put it back together, but heres what ive done for now , replaced starter, put a new carb on, took the gas tank out, clened some stuff up, replaced the passenger side door, did some wiring (thanks to projectking for walking me through it, and getting me a wiring diagram):lol::lol::lol::lol: now im just needing a grill, starter, altenator, 4 new tires, and a set o license plates, some insuranse and il be driving this baby.

Re: '69 lifted k10 build
 

Definitely got potential! And your body Paint reminds me of an article I saw in Autoweek recently on Ed Roths old truck....

Re: '69 lifted k10 build
 

Definitly a sweet truck. Keep with it and do a little at a time and in the end you can have something special.

Im diggin the paint scheme also. I know alot of guys would love too have a truck like that.

Keep at it and make it your own, make wise decisions and dont get discuraged or lose intrest.

I learned im spoiled working on these trucks. Most things are fairly easy and theres plenty of space too work on them.

Re: '69 lifted k10 build
 

I have to sit in the engine bay to do anything in that area and I'm 6'0 and fit no problem lol. and the paint scheme would be cool if it wasn't chiped. sadly going to repaint. probably black with red accents and stripes. good news is 90% of what i need is cheap.

Re: '69 lifted k10 build
 

And also this truck was a mud drag truck before i got it, but the motor is practically freshly rebuilt

Re: '69 lifted k10 build
 

[QUOTE=Deer_hunter_088;7705300]I have to sit in the engine bay to do anything in that area and I'm 6'0 and fit no problem lol.
Yhea me too but i dont like getting in and out its a pita.also i can't be in there very long before i gotta get up outa there and stretch out.

and the paint scheme would be cool if it wasn't chiped. sadly going to repaint.
some cheap close enough matching rattle cans can really help before a full blown paint job....thats not cheap!

probably black with red accents and stripes.
still cool colors. my kids learning black vehicles are a bear too keep clean.:lol:

Re: '69 lifted k10 build
 

lol i just picked black and red because thats my demo colors.

Re: '69 lifted k10 build
 

the motor in my k10 is a suped up 350 sbc. long tube headers, eldebrock 750, alot o cam, and i think punched 10 over. pretty fresh rebuild from what i can tell.

Re: '69 lifted k10 build
 

I am 70 years old so when I have to work on mine I just take the front tires off and set it on the ground.

Re: '69 lifted k10 build
 

@haysonj, your truck is beautiful. Nice paint combo and design. I live about an hour and 1/2 south in Ventura,

Re: '69 lifted k10 build
 

My grandpa was the same way, but with an ole 70s ford f250 4x4.

Re: '69 lifted k10 build
 

so yesterday all i did was random wiring work, and yeah, so today i gotta wire my bat up to my fuse block

Re: '69 lifted k10 build
 

...and 3 point seat belts, you need 3 point seat belts before it ever see's a road.

I've done a steel dash face plant... hurts like hell.

Re: '69 lifted k10 build
 

law in my area dont require 3 point. and dont have the money.

Re: '69 lifted k10 build
 

Those sound like lame excuses to me. Make it a priority.

When I was 16 my dad wouldn't let my 67 C10 leave the driveway until I installed them.

A set from an S10 or square body should be plenty cheap from a junkyard. You can even use the factory mounting points.

One of my close friends from HS was paralyzed from the neck down when she was 17 because her head hit the windshield from an accident (no seatbelt, but with your height the same could happen with just a lap belt). The car had minimal damage, the other girl with her walked away - she wore hers. She passed away a few years ago at 32.

Re: '69 lifted k10 build
 

I know it's still a decent chunk of cash if money is tight, but I put these belts in my truck over the weekend. $57/side + my time to build some brackets. I also had to buy some grade 8 bolts.

I bought these cheap ones over nicer sets I heard about because I wasn't sure I'd keep them if I changed my seat setup -- I've seen mixed reviews but I have no complaints so far. They work as good as any seatbelt I've used.

Everyone has to weigh the risks on their own, but in my book $114 is a better deal than what it will cost to put your teeth back where they go.

Re: '69 lifted k10 build
 

The lap belts are fine. I always wonder about how I'd manage in a wreck with my '71, but then I just realize I ride my motorcycle thrice as much is the '71 and at higher rates of.speed.

To this day you have a better chance spotting my father in his truck without a seat belt on than with it. This is a guy who t-boned a Toyota Sequoia in a '57 3100 with no seat belts. Broke the wheel and column with his chest and the windshield with his head!

He likes the saying if your gonna be dumb you gotta be tough.

Re: '69 lifted k10 build
 

Don't screw around with the engineering of the seat belts. The stock belts in good shape are superior to something that doesn't really fit "made to work" with home made brackets and so forth.

I've been in three wrecks with my trucks--including running under a semi trailer (brake failure) and being run off the road and hit a tree. The stock belts worked as advertised.

Re: '69 lifted k10 build
 

Only problem is my truck had zero belts when I bought it. It was grounded until I put these in. I agree with your sentiments in general though.

Re: '69 lifted k10 build
 

If that's really how you feel then at least spare passengers the trouble of you get in a wreck. 67redneck and anyone else advising to get 3 point seatbelts aren't just busting your balls, it's been proven beyond a shadow of a doubt by hundreds of professionals that the difference in bodily harm is massive between the two types of seatbelts. It's not difficult, and it's probably garaunteed to be the cheapest upgrade you do besides maybe brake pads or antifreeze.

Re: '69 lifted k10 build
 

The po didn't know it had seatbelts until i showed him. don't think they were ever used.

Re: '69 lifted k10 build
 

UPDADE: so found a lead to my parts i need, and have picked a paint scheme, and am getting ever so closer to cranking it over

Re: '69 lifted k10 build
 

UPDATE: primered the doors, did a lil tinkering, still needing me a grill an tank though. also pulled the diff cover. also hunted down the vin, its a flint michigan truck, origanly a c20 lwb, so a frame swap happened because its on a k20 frame. from what appears to be a 73-78 chevy

Re: '69 lifted k10 build
 

https://scontent.cdninstagram.com/t5...63651115_n.jpg What it should like when done, except the 69 grill, and the grill, bumper, almost all chrome back, with red details (ex. the Chevrolet letters in the grille being red)

Re: '69 lifted k10 build
 

I like the look you're going for! Keep your goals in front of you and realize that it may not come easy.

When you hit a tough spot is when you really get to learn and to improve.

Improvise and overcome. Especially when you're on a budget.

Good luck!

Re: '69 lifted k10 build
 

She's gunna get a lot of sheet metal. and it will only be on like 33s (my mum will also be driving this when she needs to and she's only 5'0" so that's a factor (also why it don't have a 5 speed manual)

Re: '69 lifted k10 build
 

You have to post some pictures of the build! Mine is rough but I love to whore it out on the web!

Re: '69 lifted k10 build
 

My way of posting pics is weird. i have to send it to a friend on fb then use the laptop and do the img. link thingy. but yeah imma try getting some SOON

Re: '69 lifted k10 build
 

Are you not able to hook up your phone/camera with a usb cable to your laptop?

Re: '69 lifted k10 build
 

Nope. never can get it to link up. But my friend don't mind. If any of yall have instagram I'm the same name as i am on here and i post pictures on it.

Re: '69 lifted k10 build
 

https://scontent-iad3-1.xx.fbcdn.net...ee&oe=57F5E950

Got a door primered

https://scontent-iad3-1.xx.fbcdn.net...f5&oe=57F6272F
Some junk in the bed

https://scontent-iad3-1.xx.fbcdn.net...98&oe=57F59A0B

when i decided to take a random pic.

https://scontent-iad3-1.xx.fbcdn.net...d1&oe=57F606FF

The 350 SBC under the hood.

Re: '69 lifted k10 build
 

You can make a photobucket account and upload the pics to that acct from a smartphone, then get the links to post the pics here.

Re: '69 lifted k10 build
 

might have to try that!!! my friend really dont mind me sending random pics tho. She likes my truck. :lol::lol::lol:

Re: '69 lifted k10 build
 

https://scontent-lga3-1.xx.fbcdn.net...92&oe=57FEFEBE Well that happened, started with pulling the seats, then the carpet, then the gauges. then redoing the gauges, and revealing some rust! (footwell, floor board, etc, also found out my trucks been restored before!!!! unless the factory RIVETED panels in, and used fiberglass to hide rust. and to make panels. Also blew a couple dollars on some rustoleum Rust Reformer, and have to say it looks to be doin its job.

https://scontent-lga3-1.xx.fbcdn.net...24&oe=57FFF59F

Also took a picture of my dads project truck. dang thing has NO rust, 3647 miles, origanal motor, he got it from some old man that bought it new back in 58 and drove it for a couple years and parked it,

Re: '69 lifted k10 build
 

Just relised my pics like not working after a few, hmmmmmm probably gunna try some different things then. but i also hate the struggle of parts hunting, like its like i cant find anything on this truck in my area, might have to check a local dude, who if i remember had a few ole ones on his property.

Re: '69 lifted k10 build
 

Just found your build. You need to get those pictures working, I've still not seen any picture other than your avatar.

Oh and all that about the 3 point belts - do that! Us older guys have seen the results of not having them too many times.

-Richard

Re: '69 lifted k10 build
 

Alright guys so long time without a update. It runs. I had to get a gas tank and a carb electric pump. She runs like a champ. Pics coming asap