Cutting up a couple 65 trucks
 

Not much here, but selling patches starting at $30 plus shipping. Any other parts please ask. These trucks are going to the scrap yard at the end of the week.
Thanks,
Ray

Re: Cutting up a couple 65 trucks
 

2222

Re: Cutting up a couple 65 trucks
 

You're scrapping a 4x4?

Re: Cutting up a couple 65 trucks
 

I am interested in the parking brake / e-brake cross member and hardware in the first truck, and the transmission high hump front piece in the second truck if it is complete.

Re: Cutting up a couple 65 trucks
 

Pm sent.

Gonna pass on the high hump front piece.

Re: Cutting up a couple 65 trucks
 

I would be interested in the inner fenders if they are in good condition and you are willing to ship to 74017 Thanks.

Re: Cutting up a couple 65 trucks
 

How much for the second truck as is?

Re: Cutting up a couple 65 trucks
 

is this a steering damper or part of powersteering? if ps i'll take all the parts

Re: Cutting up a couple 65 trucks
 

I will be getting to these in the next couple days and have answers. The 2nd truck is a 2wd that was converted to 4wd using 73-87 4x4 parts. They did an UGLY job on the conversion.
Thanks

Re: Cutting up a couple 65 trucks
 

Firewall part of high hump?

Re: Cutting up a couple 65 trucks
 

Looking for pass side 292 frame to motor mount perch for a 4x4

Re: Cutting up a couple 65 trucks
 

Price on rear end in 2WD truck?

Re: Cutting up a couple 65 trucks
 

Ray,

I will take the lower radiator supports if four core, an what condition is the core support?

Thanks,
Les

Re: Cutting up a couple 65 trucks
 

looking for the park brake handle and mounting bracket....

Re: Cutting up a couple 65 trucks
 

Looking for 2WD Parking Brake Actuating Lever and Parking Brake Actuating Rod and Anti-rattle Spring for both sides. (You probably know this, but the parts I'm after are inside the rear drums. Thought I had them, but nope .... so I have to locate some.) Should also mention that I don't know how the Parking Brake Actuating Lever attaches to the brake shoe .. so I'd like that connecting bolt or pin or whatever.) Thanks,

Re: Cutting up a couple 65 trucks
 

I'm spending today working on these trucks.
The e brake crossmember looks good $65 shipped
I will get a better look at the inner fenders when I pull the front off. The high hump firewall looks good $75 shipped.
The 2wd front suspension and rear axle are sold locally. The radiator core support looks rough on the one and I will take a close look at the other. I will check the shelf for drum springs and hardware. I will post more pictures. Thanks!

Re: Cutting up a couple 65 trucks
 

PM Sent.

Re: Cutting up a couple 65 trucks
 

Would you have any heater control knobs?

Re: Cutting up a couple 65 trucks
 

The radiator core supports and inner fenders are bad.
e brake handle with bracket...$38 shipped
e brake crossmember... $65 shipped to lower 48. Canada extra
high hump firewall...$75 shipped

Here's some pictures:

Re: Cutting up a couple 65 trucks
 

2222

Re: Cutting up a couple 65 trucks
 

3333

Re: Cutting up a couple 65 trucks
 

Pm sent.

Re: Cutting up a couple 65 trucks
 

Do you have the fenders and front grille support? Let me know please

Re: Cutting up a couple 65 trucks
 

do you have the passenger side fresh air vent assembly or even just the vent door/handle?

Re: Cutting up a couple 65 trucks
 

Sorry, no grille support and no fresh air parts.
These trucks have been cut up and dropped off at the scrap yard. Only the few parts asked for remain and some frame pieces. Thanks

Re: Cutting up a couple 65 trucks
 

Payment sent.

Re: Cutting up a couple 65 trucks
 

PM me your paypal for high hump firewall piece or send payment request to jpayne_80@hotmail.com

Re: Cutting up a couple 65 trucks
 

If you still have the truck I am interested it rear cab frame mounts and frame horns
Posted via Mobile Device

Re: Cutting up a couple 65 trucks
 

If you still have the truck I am interested it rear cab frame mounts and frame horns
Posted via Mobile Device

Re: Cutting up a couple 65 trucks
 

How much for the forward bed mounts . I need the front two. shipped to 13407

Re: Cutting up a couple 65 trucks
 

I will be shipping out Monday for everything that is paid for...Thanks!
The rear cab mounts are $65 shipped.
I don't want to break up the set of bed brackets. $50 shipped for the set.
I can post pictures if interested. Thanks!

Re: Cutting up a couple 65 trucks
 

e brake handle with bracket...$38 shipped let me know if still available...tks

Re: Cutting up a couple 65 trucks
 

I have one if interested

Re: Cutting up a couple 65 trucks
 

The e brake crossmember went out today and the e brake lever and bracket will go out tomorrow. Thanks

Re: Cutting up a couple 65 trucks
 

In need of a wiper motor mounting bracket patch...do you have one still available that's not rusted out? Let me know so I can PM you.

Re: Cutting up a couple 65 trucks
 

Payment sent for firewall hump piece.

Re: Cutting up a couple 65 trucks
 

Rear cab brackets:

Re: Cutting up a couple 65 trucks
 

rrgkuy

Re: Cutting up a couple 65 trucks
 

Are the e brake stuff still available?

Re: Cutting up a couple 65 trucks
 

What do the door sill plates look like?