Parting 72 burb
5 Attachment(s)
Plain jane burb but still a lot of decent parts on it. It is the light green (518) interior with long 2nd row seat. There is no headliner, 3rd seat, rear panels or A/C in the truck. Everything I have listed here has already been pulled from the truck and pictures are available. If you don't see something just ask. All prices are for just the part, shipping is extra. If you say you are interested but have questions or want to see pics that DOES hold your place in line for 24 hrs after I answer or post pics. I will post pics of some of it now but with 60 plus pics dont want to flood the ad too bad.
5.20.18 Still quite a few parts available 1) Door panels (all four including arm rests for front) $250SOLD 2) Front seat belts $100SOLD 3) 2nd row seat belts $100SOLD 4) 2nd row brackets and hardware $125 SOLD 5) 2nd row arm rests (includes pads and ash trays) $60 SOLD 6) Fuel filler includes bent cap $45SOLD 7) Visors includes rod clips $30SOLD 8) Ash tray and mounting bracket w/screws $30SOLD 9) Dome light w/ hacked pigtail and mounting plate $35SOLD 10) Brake pedal assembly $40 11) A/C control weak chrome but nothing broke $25 12) oil line (engine end cut at sender) $5 13) oval plugs 3rd door $15 for pair 14) metal clutch delete $2 SOLD 15) head light bezels $15 for pair (have several pairs) 16) 72 only door screws and ferrules (one screw in poor shape $25pr SOLD 17) Steering column without wheel. $125SOLD 18) steering column dash parts $20SOLD 19) Kelsey Hayes brake controller and parts $25SOLD 20) Gas pedal assembly includes cable $45 21) 3rd door still has glass & outside handle. minor rust outside btm corner $100SOLD 22) 3rd door hinges (could use new pins) $50SOLD 23) 3rd door pillar ( not cut from truck yet) $125SOLD 24) 3rd door striker plate $15 SOLD 25) 3rd door sill plate (have several) $20 26) Uncut dash (can cut anywhere needed, not removed yet) $100 27) wiper arms including original heads $30 pr 28) motor mounts (small v8) $30 pr have several pair 29) Dash Cluster untested but looks nice $75 30) Hatch struts $30 pr includes boltsSOLD 31) tailgate hinge straps $20 includes boltsSOLD 32) Hatch handle (pitted but usable) $15 33) Tailgate & hatch parts includes cover plates, hardware, latches & rods Does not include the key cylinder, bezel or mounting plate. $125 Will do package pricing as well. . Attachment 1711323 Attachment 1711324 Attachment 1711325 Attachment 1711327 |
Re: Parting 72 burb
5 Attachment(s)
6-10
. |
Re: Parting 72 burb
5 Attachment(s)
11-15
. |
Re: Parting 72 burb
5 Attachment(s)
16-20
. |
Re: Parting 72 burb
5 Attachment(s)
21-25
|
Re: Parting 72 burb
Can you post more pics of steering column? Very interested
|
Re: Parting 72 burb
3 Attachment(s)
Quote:
Here are some more pics. Let me know if anything specific you need to see. I will need your address for shipping quote Richard . |
Re: Parting 72 burb
Fuel filler to 55744.
|
Re: Parting 72 burb
Quote:
Richard |
Re: Parting 72 burb
Quote:
Thanks. |
Re: Parting 72 burb
Quote:
|
Re: Parting 72 burb
Quote:
|
Re: Parting 72 burb
I will take #16.
|
Re: Parting 72 burb
Quote:
|
Re: Parting 72 burb
Quote:
Thanks Richard |
Re: Parting 72 burb
Quote:
|
Re: Parting 72 burb
Would u separate any of the tailgate and hatch stuff?
|
Re: Parting 72 burb
Quote:
Thanks Richard |
Re: Parting 72 burb
1 Attachment(s)
Just the 3 circled in the picture
|
Re: Parting 72 burb
Pretty sure I have extras. Let me pull in the morning and will post pics and price
|
Re: Parting 72 burb
Thanks alot
|
Re: Parting 72 burb
Are you parting the white burb too? It looks to be a barn door burb. Id be interested in all the parts, sheet metal, latches etc that I would need to take a hatch and gate burb to barn doors. I have plenty of extra doors, just not any of the rest of the stuff to convert to barn doors. Im not positive if I have the hinges. Ill look if you decide on whether this is a doable thing on your side.
Id be interested in this stuff if it doesn't cost me an arm and a leg and possibly my first born grandchild. |
Re: Parting 72 burb
Quote:
CG I have already torn into the white one. It is barn door. The doors were complete junk but all the latches were still good. Let me look in the morning to see what I have left |
Re: Parting 72 burb
That would be great. I think the bottom of area of the door opening and the top area of the door opening are different. Dunno bout anything on the sides of the opening. You should be able to tell pretty easily though considering you have em both right next to each other =)
|
Re: Parting 72 burb
1 Attachment(s)
Quote:
.SOLD |
Re: Parting 72 burb
5 Attachment(s)
Quote:
You might want to look Powdercougar up as he was in the middle of doing this very conversion. I have attached pictures that hopefully you can see clearly enough. the lower sill plate as well as the header on a tailgate model look to already have the proper embossings to go with barn doors and the side pillars already have the holes for the hinge bolts and the slots for the hinges to go in. Your existing tailgate strikers that bolt to the body are the same as the barn door ones they just need to be relocated. You would end up with a recess area in the lower sill plate where the old tailgate hinges were unless you swap it out or weld in a patch area. The one I have is rusty on the ends so it would only be good for patches at best. I can cut out anything you need. You will also need different door struts (I have a pair). I can also make a paper template for all the hole drilling, if needed. I have most of the internal guts for the barn doors but do not have the lock or exterior handle. Let me know if this helps or what you might need and we can go from there. The white one is barn door the green one is tailgate model Richard . |
Re: Parting 72 burb
2 Attachment(s)
A few more pics for CG
. |
Re: Parting 72 burb
If it gets to me I'll take the filler neck. Lmk thanks.
|
Re: Parting 72 burb
How are the hood and front fenders? I'm interested in those - unsure of price though. Didn't see those in your list of parts.
|
Re: Parting 72 burb
3 Attachment(s)
Quote:
Fenders and drivers door are junk as well. Passenger door & 3rd door are repairable and if someone did not have any other options gate & hatch could be salvaged. . |
Re: Parting 72 burb
1 Attachment(s)
Quote:
. |
Re: Parting 72 burb
I'm looking for the chromed plastic headliner trim dividers. Looks like they are there in one of the recent pics you posted. Just need one but will take all three if in good shape. (Careful removing them, mine broke) Thanks
|
Re: Parting 72 burb
Quote:
Richard |
Re: Parting 72 burb
Yikes - that is rusty - thanks for more information. I'll keep looking for 518 (Medium Green) fenders and a hood.
|
Re: Parting 72 burb
Quote:
Richard |
Re: Parting 72 burb
I will take this to. Thanks!!!
Quote:
|
Re: Parting 72 burb
2 Attachment(s)
Quote:
Richard . |
Re: Parting 72 burb
Quote:
|
Re: Parting 72 burb
Quote:
Thanks Richard |
Re: Parting 72 burb
Quote:
|
All times are GMT -4. The time now is 05:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com