1969 CST/10 Part Out 4x4
 

Hey Everyone,
I'm beginning to tear down a '69 CST K10 the truck was a bucket seat truck but I'm going to be holding onto the seats for now. The truck was rusty with 25% of the front cowl/firewall being spray foam with a piece of vinyl siding under driver side inner cowl to help drain water away from drivers feet. With that being said the body is completely toast and some other items are a bit rusty. I am listing below a few of the items I have removed ready to go. All prices unless noted have shipping included for lower 48.

DG4 Stainless Mirror Arms $75
Cab Wiring Harness/Fuse Panel $85
Fender to Cab Seals $30
Manual Throttle $85 (End fitting is broken off but included, it does have barrell clip but it is rusty, can't seem to get wire inside to move but the knob has twising movement still. It as a deluxe Knob.)
Bucket Seat Carpet Rings $65 (5 Total Rings with screws)
Auto Column $150 Shipping Not included (Out of Different Truck)
Brake/Clutch Pedals $70


Let me know if there is something you are looking for and I'll see if it is usable.

Re: 1969 CST/10 Part Out 4x4
 

111

Re: 1969 CST/10 Part Out 4x4
 

222

Re: 1969 CST/10 Part Out 4x4
 

333

Re: 1969 CST/10 Part Out 4x4
 

How is the glass in the mirror head that isn't rusty?
I also need the oil dipstick tube.
Let me know. Shipping to 92106
Thank you.

Re: 1969 CST/10 Part Out 4x4
 

-
Be sure and save the under floor brace that the bucket seats bolted to. They are hard to find.

LockDoc

Re: 1969 CST/10 Part Out 4x4
 

I think the motor was repaced at some point tge dipstick looks like a passenger car one correct me if I'm wrong.

Re: 1969 CST/10 Part Out 4x4
 

Will do LockDoc hopefully its not as rusty as the rest of the truck.

Re: 1969 CST/10 Part Out 4x4
 

How much for the radio and associated wiring/brackets/knobs/speaker/etc. shipped to 83646?

Re: 1969 CST/10 Part Out 4x4
 

Willy, I'll look to get the radio pulled tomorrow and let you know price.

Re: 1969 CST/10 Part Out 4x4
 

Sounds good, thank you!

Re: 1969 CST/10 Part Out 4x4
 

What kind of shape is this front fender, front lower trim in? Price shipped?

Re: 1969 CST/10 Part Out 4x4
 

Front fenders were shot rust everywhere so they were scraped. Trim was put back on truck using self tapers through face of trim. Sorry to disapoint but thanks for asking.

Re: 1969 CST/10 Part Out 4x4
 

Antenna also save roof light stuff

Re: 1969 CST/10 Part Out 4x4
 

Antenna was aftermarket and broken.

Re: 1969 CST/10 Part Out 4x4
 

How good is the steering column that is in the truck?

Re: 1969 CST/10 Part Out 4x4
 

Column sold locally Sorry.

Re: 1969 CST/10 Part Out 4x4
 

Willys here are some pictures of the radio, speaker, brackets, cups, wiring and knobs. I'm not sure if radio works or not. Since I'm not sure on radio how does $75 shipped for the whole package sound?

Re: 1969 CST/10 Part Out 4x4
 

Best View what are you looking for with the roof lights? Do you want the lights and wiring or do you want seperate items? The wiring terminates at the headlight switch.

Re: 1969 CST/10 Part Out 4x4
 

How much for the transfer case shift knob & carpet ring & boot

Re: 1969 CST/10 Part Out 4x4
 

Blap I believe the tcase is a rockwell t221 are you still interested?

Re: 1969 CST/10 Part Out 4x4
 

I know I shouldn't, but I'll take it. Send me your paypal address.

Is the transmission an NP435? The shift boot looks like an oval, but it's hard to tell. If it's a rectangular/square-ish shape, those aren't reproduced and someone's definitely looking for one.

Re: 1969 CST/10 Part Out 4x4
 

PM sent for payment. I'll have to check tomorrow thanks for the info I figured it would be a 4 speed saginaw.

Re: 1969 CST/10 Part Out 4x4
 

Looking for 1 rear spring hanger one of mine was cut

Re: 1969 CST/10 Part Out 4x4
 

Payment sent! Thank you

Re: 1969 CST/10 Part Out 4x4
 

what shape are the blue door panels in and do you have a price in mind? thank you

Re: 1969 CST/10 Part Out 4x4
 

Payment received Willys I'll hopefully get it shipped out today.

Re: 1969 CST/10 Part Out 4x4
 

I'm looking to sell the frame as a roller but if I have no interest or if the frame is too far gone I will be sure to take a look at the hangers for you.

Re: 1969 CST/10 Part Out 4x4
 

Blue door panels are trashed, metal panels were so rusty no screws were actually holding the panels to the doors. Sorry

Re: 1969 CST/10 Part Out 4x4
 

Yes I'm interested

Re: 1969 CST/10 Part Out 4x4
 

I might be interested in the frame depending on the condition and price. Thanks, Bill

Re: 1969 CST/10 Part Out 4x4
 

Once I get the cab off I'll post some pictures and you can have first dibs.

Re: 1969 CST/10 Part Out 4x4
 

Is the headlight and front turn signal harness complete?

Thank you

Re: 1969 CST/10 Part Out 4x4
 

Sorry, can't figure out how to edit on mobile. I could use the headlight assemblies and grille turn signal assemblies as well.

Re: 1969 CST/10 Part Out 4x4
 

I'll check on the harness Monday as the truck is at my work. What do you need for the headlight assembly? Buckets, trim rings?

Re: 1969 CST/10 Part Out 4x4
 

If you part the frame i’m looking for a 4x4 engine and transmission crossmember. Also lookingffor good front frame spring mounts.

Re: 1969 CST/10 Part Out 4x4
 

How is the hood, is it shot at the leading edge . ?

Re: 1969 CST/10 Part Out 4x4
 

How is the inner and outer grille?

Re: 1969 CST/10 Part Out 4x4
 

Will keep that in mind.

Re: 1969 CST/10 Part Out 4x4
 

Hood is in rough condition but I will get some pics I also have a GMC Hood that I can get some pics of as well.