Gauge Cluster Decals for 5000, 8000 RPM Tach, Vac, KPH, MPH, Trans Temp, Boost, etc.
 

I designed these decals because I don't like how the text looks on the reproduction lenses for the 8k tachometer conversion kits. The font is wrong, and the numbers aren't aligned well with the tach. Also, they apply the text and green paint both on the back of the lens, but the green paint was applied to the front of the lens on the originals. This makes the reproduction lenses not light up as well at night.

To design these stickers, I scanned an OE 5k tach and vac lens and used CAD software to trace the characters and set the spacing to align with the 8k tach. I borrowed the missing 6, 7 and 8 numbers from a scan of the speedometer.

These decals are cut out of adhesive-backed vinyl. Clear transfer tape is applied to the front of the decal to allow the decal to be removed from the white backing and then applied to the lens. Sometimes portions of the decal don't want to stay attached to the transfer tape, which requires firm rubbing of the transfer tape against the decal followed by peeling it off slowly while checking that each character lifts off the backing.

The original dummy gauge graphics on the lens must first be removed with a small polishing wheel (EDIT - Purple Power cleaner works better for removing the original graphics). I used a cheap one from Harbor Freight on my cordless drill. A quick wipe-down with isopropyl alcohol cleans off the residue. Just don't leave the alcohol on there too long, as it can cloud the surface of the lens. By the way, minor waviness in the surface of the lens is left behind from where the graphics were removed. It is possible to see it a little bit if you get light reflecting at just the right angle.

There is a border around each decal that aligns with the circle on the lens. A flat side is provided for setting the orientation. I like to apply a long piece of masking tape to use as a horizontal guide. DON'T APPLY THE TAPE OVER ORIGINAL TEXT OR PAINT as it may lift off when removing the tape. You've got to be careful not to let the decal touch the lens prematurely as you're aligning it. Hold the lens up to a light so you can see through the decal backing to align it. You can tape down one edge of the sticker while the backing is still on and use the tape as a hinge to set the sticker in place on the BACK of the lens after removing the backing.

Tach Decal Install Video

Vacuum Gauge Install Video

If you have a 5k tachometer already and you want to convert to an 8k, then all you need is one of these 8k decals and the 8k tach. You can buy just the tach from npdlink.com. if you need tach/vac tins, member 70shortfleet can modify your originals. He does amazing work.

***EDIT***
I also have KPH decals available.

8k Tach Decal $15 mailed
5k Tach Decal $10 mailed
0-160 KPH Decal $20 mailed
VACUUM Decal $10 mailed
TRANS TEMP Decal $10 mailed
BOOST Decal $10 mailed
Tilt Shift Indicator Decal $10 mailed
BATTERY Decal $10 mailed
0-100 MPH Decal $15 mailed
Temperature Gauge Hot Zone $5 mailed

Zelle, CashApp, money order or personal check preferred. PayPal accepted, you pay fees

https://67-72chevytrucks.com/vboard/...1&d=1701498958
https://67-72chevytrucks.com/vboard/...1&d=1701211418
https://67-72chevytrucks.com/vboard/...1&d=1701142874
https://67-72chevytrucks.com/vboard/...1&d=1702015973
http://67-72chevytrucks.com/vboard/a...1&d=1719614165
http://67-72chevytrucks.com/vboard/a...1&d=1741040542
https://67-72chevytrucks.com/vboard/...1&d=1741222700
https://67-72chevytrucks.com/vboard/...1&d=1751046913
https://67-72chevytrucks.com/vboard/...1&d=1761010957

Re: Decals for 8000 RPM Tach and Vacuum
 

A couple more photos.

Re: Decals for 8000 RPM Tach and Vacuum
 

Will take one of the 8K tach decals to use with my air pressure lense.

Re: Decals for 8000 RPM Tach and Vacuum
 

I will take a tach and a vacuum. Send me a PM and I will get you paid.

Re: Decals for 8000 RPM Tach and Vacuum
 

Nice work. Great contribution.

Re: Decals for 8000 RPM Tach and Vacuum
 

I'll take 1 tach and 1 vac.

Thanks,
David

Re: Decals for 8000 RPM Tach and Vacuum
 

PMs sent

Re: Decals for 8000 RPM Tach and Vacuum
 

I’ll take one of each

Re: Decals for 8000 RPM Tach and Vacuum
 

Sounds good. PM sent

Re: Decals for 8000 RPM Tach and Vacuum
 

Received the tach decal today. Thank you. Try to dig out the cluster that has the lens I am using soon. FWIU I am scheduled to hang Christmas lights this coming weekend.
Richard

Re: Decals for 8000 RPM Tach and Vacuum
 

I'm glad it made it to you quickly. Other letters I've sent recently have been taking more than a week to arrive.

Re: Decals for 8000 RPM Tach and Vacuum
 

I also have km/h decals available.

Re: Decals for 8000 RPM Tach and Vacuum
 

Interested in one of those! PM sent

Re: Decals for 8000 RPM Tach and Vacuum
 

Here's a TRANS TEMP decal for Sixty7k10

Re: Decals for 8000 RPM Tach and Vacuum
 

Do you have anymore trans temp decals?

Re: Decals for 8000 RPM Tach and Vacuum
 

I do have an extra one already made. I can make more of any of these decals, by the way.

Re: Decals for 8000 RPM Tach and Vacuum
 

Can you do a boost decal?

Re: Decals for 8000 RPM Tach and Vacuum
 

Possibly. I would need a very straight-on photo or scanned image of the gauge.

Re: Decals for 8000 RPM Tach and Vacuum
 

Are you just using a stock AIR gauge for boost and you just need the word BOOST like I did with TRANS TEMP?

Re: Decals for 8000 RPM Tach and Vacuum
 

Boost just like trans temp to be used in the same place on a different set of gauges

Re: Decals for 8000 RPM Tach and Vacuum
 

Ok. All of the letters for BOOST are present on the the stock gauges. I'll work on this in the next day or two.

Re: Decals for 8000 RPM Tach and Vacuum
 

I made some BOOST decals. Is this what you had in mind?

Re: Decals for 8000 RPM Tach and Vacuum
 

Yes, that looks good. How much do I need to send?

Re: Decals for 8000 RPM Tach and Vacuum
 

All purchased decals have been mailed out. I can make more for anyone who is interested. If you want something different, let me know.

Re: Decals for 8000 RPM Tach and Vacuum
 

First shipment received, they look really good!
Thanks

Re: Decals for 8000 RPM Tach and Vacuum
 

I'm glad to hear it!

Re: Decals for 8000 RPM Tach and Vacuum
 

I also have regular 5k tach decals available.

Re: Decals for 8000 RPM Tach and Vacuum
 

Second shipment arrived safe and sound, good work!

Re: Decals for 8000 RPM Tach and Vacuum
 

Thanks! Post some photos once you install them, if you don't mind

Re: Decals for 8000 RPM Tach and Vacuum
 

Will do, I’m building an extra set of gauges with the s10 speedo conversion for a Ls swap. The stencil for the conversion is a paint type and is the reason I was asking about that on the other post. I’m excited to see how it turns out and glad it will be in the correct font

Re: Decals for 8000 RPM Tach and Vacuum
 

The decals arrived today. Just have to dig out a lens and polish it up.
Thnx again.
Michael

Re: Decals for 8000 RPM Tach and Vacuum
 

I'm glad they arrived safely

Re: Decals for 8000 RPM Tach and Vacuum
 

I'll take an 8K tach decal if you have any
Thanks

Re: Decals for 8000 RPM Tach and Vacuum
 

Sounds good. I'll send you a PM.

Re: Decals for 8000 RPM Tach and Vacuum
 

Mailed 8k tach decal, although the post office is closed today.

Re: Decals for 8000 RPM Tach and Vacuum
 

Here's a video that shows how to install a tach decal.

https://youtube.com/shorts/QPzylsrfP-w?feature=shared

Re: Decals for 8000 RPM Tach and Vacuum
 

I have these automatic tilt column shift indicator decals to offer. They are modeled off of the text of a factory indicator (NOS and van text are different). One style is the stock layout with PRNDL2L1, and the other style is PRNDM for use with a modern transmission such as the 6L90E that has a "Manual" mode.

Re: Decals for 8000 RPM Tach and Vacuum
 

Very Nice:metal::metal:

These will Update an Updated truck.

Nice job. :clap::clap::clap:

Re: Decals for 8000 RPM Tach and Vacuum
 

Patrick,
I'd like to get 2 5k tach lens decals and 2 vacuum lens decals.
Also, do you have anything for the vacuum gauge and tach faces?
Thank you

Re: Decals for 8000 RPM Tach and Vacuum
 

Dave, I have those decals already made and ready to go. I don't make any gauge face decals, but I have bought them from this place:

https://www.whitegauges.net/products...ce-Gauges.html