Full part-out 1970 C-10
 

Hey all - I’m regrettably parting out a ‘70 CST-10. The cab is rusted to hell and the title has too many years of fees to save it, so its parts will live in. I’m in Los Angeles, but willing to ship small to medium sized things. It’s a CST-10 package, small block, long bed, AC, PS, PB truck. Below I will list everything NOT available anymore. Anything else is up for grabs. LMK what you need

Motor/trans (all mounts and linkages still avail)
Both bumpers and brackets
Bed floor and header panel
Tailgate (hinges I still have)
Windshield

Happy to send photos of whatever you’d like to see. Thanks!

Re: Full part-out 1970 C-10
 

Interested in tailgate hinges and door hinges.

Re: Full part-out 1970 C-10
 

What color interior/exterior

Re: Full part-out 1970 C-10
 

Any good interior parts? Door panels, trim, etc?

Re: Full part-out 1970 C-10
 

Per forum rules please post prices. Thank you.

Re: Full part-out 1970 C-10
 

Originally an orange truck. Currently a black primer truck inside and out.

Re: Full part-out 1970 C-10
 

Thanks for the tip. I’ll put together a list for the big stuff.

Re: Full part-out 1970 C-10
 

Door panels and upper trim are gone. It has a nice AC dash and all go the AC components on the cab side of the firewall. Dome light looks good. Anything specific you’re after?

Re: Full part-out 1970 C-10
 

I have them all. $20 for the tailgate side and $100 for all four door hinges, +shipping cost. Where are you located?

Re: Full part-out 1970 C-10
 

Door panels mainly. Thanks and GLWTS.

Re: Full part-out 1970 C-10
 

Pending price and condition, I'd be interested in the following:

1) Lower door panel screws
2) Metal vacuum line carb to vacuum advance
3) Headlight bezels and bulb rings

Thanks,

Brad

Re: Full part-out 1970 C-10
 

Sending a PM

Re: Full part-out 1970 C-10
 

If it has a tilt column, I'm interested in that ?

Re: Full part-out 1970 C-10
 

Pm sent

Re: Full part-out 1970 C-10
 

looking for under dash ac duct and rh inner fender if not rusted out. also looking for 4x4 bumper brackets thanks

Re: Full part-out 1970 C-10
 

Rear window stainless trim available? In good shape?

Re: Full part-out 1970 C-10
 

I have all of the under dash pieces. I do have the inner fender but it’s allegedly being picked up locally this weekend. We’ll see…. No bumper brackets.


Pm me for shipping details!

Re: Full part-out 1970 C-10
 

Yes I do! Pm and I can send some pics.

Re: Full part-out 1970 C-10
 

Sent a pm

Re: Full part-out 1970 C-10
 

just sent pm
also looking for radiator core support to frame bracket and if the fender is not picked up I am in

Re: Full part-out 1970 C-10
 

Cowl bolts?

Re: Full part-out 1970 C-10
 

What's the grill look like ?, also a/c ball and center vent pcs

Thanks

Re: Full part-out 1970 C-10
 

Looking for a cab cut. Is this section on the passenger side rust free? If so I would be interested.

Re: Full part-out 1970 C-10
 

U strap that holds the steering column up? thanks, Fred.

Re: Full part-out 1970 C-10
 

Sorry, cab is gone.

Re: Full part-out 1970 C-10
 

I'm in Los Angeles as well. What do the front fenders and grill look like?

Re: Full part-out 1970 C-10
 

looking for engine frame cradle on mined the spring pockets finished

Re: Full part-out 1970 C-10
 

Any wiring harness? Looking for main interior one and possibly the front as well.

Re: Full part-out 1970 C-10
 

Looking for the 12 point bolts for the hood release bracket.

Re: Full part-out 1970 C-10
 

Just sent Money for Tailgate hinges and door Hinges.

Thanks.

Address is in PM
I will send again if needed.

Thanks

Re: Full part-out 1970 C-10
 

The 12 point bolts were not used in 1970.

https://www.amkproducts.com/master-k...s&element=Body


$11 KIT

https://www.amkproducts.com/wp-conte...cs/KRI100B.png

Re: Full part-out 1970 C-10
 

I am interested in rear bumper and brackets. What do they look like.

Re: Full part-out 1970 C-10
 

Those look sold, sorry.

Re: Full part-out 1970 C-10
 

Looking for hose, from valve cover to carb spacer along with valve cover grommet and inline baffle on valve cover side. Thanks

Re: Full part-out 1970 C-10
 

Like another member said, these are 6 point. I do have those, though. PM if interested.

Re: Full part-out 1970 C-10
 

I do not have. Sorry and good luck.

Re: Full part-out 1970 C-10
 

Being a CST, I'm guessing it had dual exhaust. Any exhaust hanger brackets? Would be looking for both sides.

Re: Full part-out 1970 C-10
 

Hey All, thanks so much for the responses and purchases. Quick update with regards to what is left. Still willing to ship the small stuff, the big stuff would need to an LA local pickup.
I’m down to:
Hood - 100
Cowl panel - 50
Grille - 300
Hood latch -
Door latches - 25
Gauge cluster - 50
Door panels - 20
Longbed driveshaft with yoke and new carrier - 75
Auto trans linkage - 40
Pedal assembly (minus pedal) - 20
Glove box door - 40
AC controls - 75
Misc underway AC prices (some need epoxying) 10 each/75 for all
Aluminum radiator - 50
Hood hinges (one good, one ok) 40
Black arm rests - 25
Manual steering assembly - 75

Re: Full part-out 1970 C-10
 

Sorry, no dice!

Re: Full part-out 1970 C-10
 

Ok, thanks