Dodge cam eccentrics vs GM spacers.
I am putting GM C30 spindles under my 1973 D200 project in order to use a GM lower A-arm to eliminate Dodges strut rod. To increase front end ground clearance,
and make the front end Z easier. Then on another plus side it opens up Wilwood aluminum calipers too. Luckily both the Dodge, and GM control arms are with in a 1/8 of each other. I can use a GM upper control arm by welding the mounting point to the frame. Or I can modify the Dodge upper control arm through strategic application of a cutting torch, drill, and a grinder. To install a GM upper ball joint. So now for the question. Which system of alignment is better? GM's spacers or Dodges cam eccentrics? |
All times are GMT -4. The time now is 08:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com