The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   68C30 with LQ4 (https://67-72chevytrucks.com/vboard/showthread.php?t=844933)

1968C30 06-01-2023 11:27 PM

68C30 with LQ4
 
4 Attachment(s)
Finally was able to pull it outside under its own power. Still several things to finish up. Next thing is exhaust.

Jason Banks 06-02-2023 08:41 AM

Re: 68C30 with LQ4
 
This is great. Love the hydroboost swap too. Hope you are going to put it to work.

Looks like a hydraulic clutch? 4 speed?

1968C30 06-02-2023 08:12 PM

Re: 68C30 with LQ4
 
Quote:

Originally Posted by Jason Banks (Post 9208815)
This is great. Love the hydroboost swap too. Hope you are going to put it to work.

Looks like a hydraulic clutch? 4 speed?

Thanks we still use the truck for hauling. It has a pto driven dump bed so I needed to keep the 4 speed. I did install a hydraulic clutch.

mongocanfly 06-02-2023 09:12 PM

Re: 68C30 with LQ4
 
Nicely done..

1968C30 06-04-2023 12:09 PM

Re: 68C30 with LQ4
 
Quote:

Originally Posted by mongocanfly (Post 9208981)
Nicely done..

Thanks

MySons68C20 06-04-2023 04:21 PM

Re: 68C30 with LQ4
 
Clean just like I like it.

It looks like a factory install nice work!

LS short box 06-04-2023 04:51 PM

Re: 68C30 with LQ4
 
2 Attachment(s)
Got to like a LS swap. I'm a big LS swap fan.
Just a thought on the intake tube. Pic of my LS swapped 98 Wrangler. I did the swap about 15-16 years ago and used a bit simpler GM truck air intake. Not saying you should a cone filter but as I understand the extra plastic tubing on your set up was for intake noise reduction.

1968C30 06-05-2023 02:53 PM

Re: 68C30 with LQ4
 
Quote:

Originally Posted by MySons68C20 (Post 9209485)
Clean just like I like it.

It looks like a factory install nice work!

Thanks

1968C30 06-05-2023 02:54 PM

Re: 68C30 with LQ4
 
Quote:

Originally Posted by LS short box (Post 9209494)
Got to like a LS swap. I'm a big LS swap fan.
Just a thought on the intake tube. Pic of my LS swapped 98 Wrangler. I did the swap about 15-16 years ago and used a bit simpler GM truck air intake. Not saying you should a cone filter but as I understand the extra plastic tubing on your set up was for intake noise reduction.

Thanks. I like your Jeep!

LS short box 06-05-2023 08:39 PM

Re: 68C30 with LQ4
 
2 Attachment(s)
I still have the Wrangler. Its been a great hot rod and totally bullet proof. The pic above is the first version with a 4.8/AX15 combo. Worked well but I got tired of the stick. So pulled the 4.8 out and installed a LS6/4L60E combo.
It's my summer time mall crawler and winter plow Jeep.


All times are GMT -4. The time now is 10:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com