Electrical Connector Repair
Found this site on another forum and thought I would pass this along. Might find it useful doing electrical connection repairs. http://www.repairconnector.com/
|
Re: Electrical Connector Repair
Thank You!!! That info is exactly what I was looking for.
|
Re: Electrical Connector Repair
Thanks for the info, it could also come in handy.
|
Re: Electrical Connector Repair
Thank you much nc1967!
|
Re: Electrical Connector Repair
Thanks for posting. Any idea which would be used for the engine wire harness on a 69 c10 1/2 ton? I'd rather spend 3 bucks instead of 90.
|
Re: Electrical Connector Repair
I was able to get replacement connectors at NAPA. The ones I have on my 68 are "Packard" style. I had to add two wires to the firewall block for my amp gauge (I changed from an idiot light to gauge instrument cluster). Take the connectors to them and they can probably match them.
|
Re: Electrical Connector Repair
Thanks for posting nc1967.Information I like to keep.Subbed
|
Re: Electrical Connector Repair
Valve float. You need the Packard stuff. I spent $1.70 yesterday at a local automotive electrical store for two tabs for the outside firewall connector. For a few cents more from this site, I could of had 8 more pieces ready for the next time!
|
All times are GMT -4. The time now is 06:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com