The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   Project Cowboy Cadillac (https://67-72chevytrucks.com/vboard/showthread.php?t=849119)

GmtGmt 12-03-2023 06:31 PM

Project Cowboy Cadillac
 
Finally getting back with a Crew Cab like I have been dreaming off since i had to part ways with my 84 Crew cab diesel 8 years ago, I have a 82 GMC C30 Cab and chassie single cab that i was putting back together but that will be parts truck for this

I did some trades and got this 1981 Chevy Crew cab dually for very cheap
missing engine and transmission,

little back ground info

Came from Pomona CA back in 2005 was used as a hauler for a private drag racer that did alot of racing at Pomona drag strip, (alot of time slips, parking cards etc was found when cleaning out)

Was imported to Denmark for the Engine and transmission (454/400 and just spares. thats way the left Dually fender has been cut off as all the bolts are spinning and they dont fit in the container
Has been sitting in at a storage yard since 2005 and was sold in early 2023 to the guy a bought it from.

It was born a 1981 Crew cab Dually with a 350, AC, power steering, Power windows and locks, No gauges only idiot lights, No tilt or cruise and in Soild white and Tan interior with bench seats

Now has a 89-91 Front clip, Lowering springs in the front, I think the rears have had removed a few leafs and diffrent shackels too.

The Plan: This wont be a restoration Like David Freiburger says dont get it right, just get it running

Drive train
Cadillac 500 with a TH400, I have plans for Fuel injection and a 4L80 later
down the road, might try to save for an LS 5.3 or 6.0 insted
2 new fuel tanks and sendering units, (plans are getting the TBI tanks so its ready for EFI)
Rebuild the brakes and front suspension/steering and new shocks
all 6 wheels blasted and powder coated white and 6 new tires
want to lower it in the back, looking at switch suspension air ride with C-notch

Exterior
Mount the rear fenders and paint the left rear dually fender to match the truck
New Mirrors
New head lights, all 3 on the right is busted
source a new tail gate and rear bumper
Onboard Air tank for Service jobs
Fix the rust in the rockers and pop out the dents in the fender and doors


Interior:
Fixing the AC (hate vehicles with out AC)
Cruise Control, not sure how hard it is to retro fit a later tilt and cruise collum with the wiring and delay whipers or else im just going to find a aftermarket cruise set up
New seat covers
Tinted rear door glass (front tint are illegal her in Denmark)
Full gauge cluster with gauges insted for idiot lights and I have a Mint 89-91 Wood grain bezel thats going on as I cant stand the alloy one
New stereo, it has a 90s stereo with Amp and aftermarket speakers behind the rear seats but I want new speakers and bluetooth and hands free

This going to be a Service truck for my company (mechanic work shop) and Hauler for our Drift car

https://i.ibb.co/7r9WTZn/20231119-145737.jpg
https://i.ibb.co/9ybQ5NC/20231119-145747.jpg
https://i.ibb.co/hLMfkmV/392395548-6...90000783-n.jpg

the 500 thats going in
https://i.ibb.co/YhN8np3/20231107-171647.jpg

GmtGmt 12-10-2023 05:36 PM

Re: Project Cowboy Cadillac
 
New Radiator arived friday, Was looking at a used OEM 3 row cooler but when the price was higher than a new aluminium rad I rather wanted a new one.
I have used these rads on other high horse power cars and never had a problem.

https://i.ibb.co/D70Z642/20231210-131135.jpg

Rockauto Brake parts, new hoses, wheel cylinders, Caliber Rebuild kit, Tempsensor and some gaskets for the rear axle.
Still wating on a new Mastercylinder, Pads and Brake shoes
https://i.ibb.co/JrccBzY/20231210-124616.jpg

Did some cleaning and quick vacum
https://i.ibb.co/dM36JkQ/20231210-130637.jpg
https://i.ibb.co/Lgkgqg3/20231210-130642.jpg
Found this old relic under the seat
https://i.ibb.co/XCYRdkv/20231210-130647.jpg
https://i.ibb.co/GsNPqmB/20231210-130723.jpg
Found this behind the rear seat, an old G&S Design Comp 150 AMP
https://i.ibb.co/ch828NZ/20231210-130742.jpg

Waiting on a few parts so i can get the Engine and trans put in

GmtGmt 12-22-2023 05:13 PM

Re: Project Cowboy Cadillac
 
Oldschool Belltech drop spindels
https://i.ibb.co/Sv3k1pv/20231222-155454.jpg

https://i.ibb.co/mhkKWsk/20231222-155502.jpg

Engine and Trans are in, Lined up and boltede down, have to drill some holes in frame for front engine mounts but its in at sitting
https://i.ibb.co/sJDBc9H/20231222-160320.jpg
https://i.ibb.co/xFXNyyT/20231222-160328.jpg

LT7A 12-25-2023 06:15 AM

Re: Project Cowboy Cadillac
 
Cool! Keep us up to date. Where are you in Denmark? I'm guessing somewhere in Jutland.

GmtGmt 01-07-2024 04:37 PM

Re: Project Cowboy Cadillac
 
Quote:

Originally Posted by LT7A (Post 9269772)
Cool! Keep us up to date. Where are you in Denmark? I'm guessing somewhere in Jutland.

Kalundborg, Sealand

Its Running and driving under its own power

https://youtu.be/9z6iC76YfOU

Driven around the shop under its own power for the first time in 19 years

Radiator Mounted, Heat core vacumed testet and passed, Holds coolent and no leaks.

https://i.ibb.co/Mkh0D2Z/20231231-110641.jpg
https://i.ibb.co/cg1Phkc/20231231-112628.jpg
https://i.ibb.co/9YC5H1M/20240102-170447.jpg
https://i.ibb.co/jR5pjTH/20240102-170458.jpg
https://i.ibb.co/GT7pFtn/20240102-170507.jpg

GmtGmt 03-29-2024 05:38 PM

Re: Project Cowboy Cadillac
 
Update

I didnt replace the rear main seal before installing the engine sadly it started to leak quickly :/ Not a fun job to do in the truck
https://i.ibb.co/h8vqXyD/Seal.jpg
https://i.ibb.co/7vShMmf/Seal-2.jpg
https://i.ibb.co/mzvDHsT/Seal-3.jpg

Outer Dually rims back from the paint shop just got to get the front ones done and then the inner 2
https://i.ibb.co/PQSscsY/Rims.jpg

Bought a new carburator as the old Quadrjet wont work proberly and leaking
https://i.ibb.co/tm26Dvp/karb.jpg

Drove it the 15miles from the shop home where it sat for a mounth waiting for a Drive shaft to be rebuild as it was shacking so bad at 30mph
https://i.ibb.co/XLJ1BSr/Drive.jpg

New fuel tank for EFI and had to put it in the bed at home to get it back to the shop as old tank was full of junk
https://i.ibb.co/7KJpsph/temp-fuel-tank.jpg

Found a used tail gate not perfect but can be used
https://i.ibb.co/frczjT4/Gate.jpg

New used front lower door cards as the driver side was trashed
https://i.ibb.co/mXwLw8g/Bumper.jpg https://i.ibb.co/r7r0F4n/door-panels.jpg

New Rear Bumper and hitch as the old one is booger welded to the inside of the frame
https://i.ibb.co/mXwLw8g/Bumper.jpg
https://i.ibb.co/zh5Cyp2/Hitch.jpg

Best off all EFI! got a very nice deal on a Holley Sniper setup that a friend didnt like on his hot rod so has maby 5hours of run time
[/url] https://i.ibb.co/ZfpDq13/sniper-0.jpg

Mounted
https://i.ibb.co/hChQGwj/Sniper.jpg
https://i.ibb.co/94bNhvb/Sniper-1.jpg

Standalone Relay and Fuse box for Fuel pump, Holley and Eletric Fan.
https://i.ibb.co/NW9WxxC/Fues.jpg

HEI Distributor and New leads
https://i.ibb.co/P4BkBwC/HEI.jpg
https://i.ibb.co/b3DtBRP/HEI-Mount.jpg

Old tank removed
https://i.ibb.co/LgfhNRw/Old-tank.jpg
New Fuel Tank and in tank Fuel pump a Decent Walbro pump

https://i.ibb.co/DkPSPV7/Sendering.jpg
https://i.ibb.co/mRtGm0z/new-tank.jpg

New Fuel Pressure Regulator and EFI Fuel Filter
https://i.ibb.co/8XLzjWB/Reg.jpg

GmtGmt 04-01-2024 10:43 AM

Re: Project Cowboy Cadillac
 
https://i.ibb.co/0KM2sKn/20240331-200953.jpg
https://i.ibb.co/nfY18qv/20240401-153113.jpg


All times are GMT -4. The time now is 06:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com