66 C10 Dual Exhaust Routing Photos w/396 bbc
 

Need some input on how to run dual exhaust on this truck.
Going with 2.5 pipe with either Flowmaster or Magnaflow

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

Here is a 2.5" Exhaust route as an example. Not mine.

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

looks dangerously close to bed wood and gas tank:exit:

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

I once had that same impression about my own exhaust. Turns out it wasn't a big deal back then and it's still not. Here's the thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=779407

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

Ya those cross members in the bed are how deep? I'm doing closely the same thing only with 2.25 pipes. Since I get under there with the installer . . The only place that will the closest will be over the rear axle still leaving almost an inch and with DEI Flexible Pipe Shield there I'm concerned - Not.

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

Noticed pipe hangers and hardware
Any good sources?

Re: 66 C10 Dual Exhaust Routing Photos w/396 bbc
 

This thread shows how mine is routed on the outside of the frame rails. I was addressing resonance but I uploaded some decent pics. Having a manual tranny with the old cast iron bell housing puts another crossmember smack dab in the way for an inside job.
http://67-72chevytrucks.com/vboard/s...d.php?t=792007