The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - I'm looking for a body-off pic (https://67-72chevytrucks.com/vboard/showthread.php?t=851650)

Shifty One

03-26-2024 06:57 PM

I'm looking for a body-off pic

Of a 4x4 small-block headers with duals, preferable without cats. Brand of headers, and any difficulties installing them is a plus.

Thanks!

JJH Jimmy

03-26-2024 10:01 PM

Re: I'm looking for a body-off pic

4 Attachment(s)

Edelbrock headers. They fit like a glove. I believe they are shortys originally for tbi trucks.

geezer#99

03-27-2024 10:19 AM

Re: I'm looking for a body-off pic

Jimmy, have you driven it with the trans yoke out so far?

Shifty One

03-27-2024 10:55 AM

Re: I'm looking for a body-off pic

Thanks Jimmy! :metal:

What about some long tubes now? I should have specified...:dohh:

JJH Jimmy

03-27-2024 11:55 AM

Re: I'm looking for a body-off pic

Quote:

Originally Posted by geezer#99 (Post 9299247)

Jimmy, have you driven it with the trans yoke out so far?

About 10K miles. Originally the truck had a SM465 trans and i swapped it out for a TH400 when i built it but the transfer case stayed in the same spot. It was obvious from the seal wear on the yoke that it was like that for a long time and it still engaged the TC output shaft by about 5". This winter i switched out the TH400 for a 4l80E and there is about an 1" of play before it bottoms out on the TC output shaft.

geezer#99

03-27-2024 12:34 PM

Re: I'm looking for a body-off pic

Thanks Jimmy.
It caught my eye, looked weird.

All times are GMT -4. The time now is 05:05 PM.