The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   ID WTB Dana 44 rear axle backing plates (https://67-72chevytrucks.com/vboard/showthread.php?t=731105)

18Z 02-22-2017 09:26 PM
WTB Dana 44 rear axle backing plates
 
Looking for Dana 44 Rear axle Backing plates, I have a 1971 GMC K15.

18Z 02-22-2017 10:59 PM
Re: WTB Dana 44 rear axle backing plates
 
Picture of my axle tube end.

http://67-72chevytrucks.com/vboard/p...ictureid=23396

andyh1956 02-27-2017 11:53 AM
Re: WTB Dana 44 rear axle backing plates
 
Would BPs from a scout 2 work?

18Z 02-27-2017 10:17 PM
Re: WTB Dana 44 rear axle backing plates
 
Thanks andyh1956 for the reply, I am going to keep the welded on ones for now until I can find a good original diff that has them already on it.

Captainfab 02-28-2017 01:00 AM
Re: WTB Dana 44 rear axle backing plates
 
Depending on what gears are in your Dana 44, I would recommend changing it for a 12 bolt. You can get drums for a 12 bolt. Not so easy for the Dana 44.

18Z 03-01-2017 11:20 PM
Re: WTB Dana 44 rear axle backing plates
 
Thanks Captainfab!


All times are GMT -4. The time now is 03:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com