The 1947 - Present Chevrolet & GMC Truck Message Board Network - Where to tie in on a good electrical point (underdash) for newer Chevy P/U?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 07+ Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=201)

- - Where to tie in on a good electrical point (underdash) for newer Chevy P/U? (https://67-72chevytrucks.com/vboard/showthread.php?t=724590)

77 ChevySport

12-11-2016 03:20 PM

Where to tie in on a good electrical point (underdash) for newer Chevy P/U?

Try to make a long story short. Will be adding a GPS system that needs 12 Volts to
go on when engine runs;off when engine shuts off. GPS system will augment my OnStar.
My application is a 2014 Silverado. Where is a good/simple point to tie in and get this voltage? We all know with the older vehicles it was as simple as running a wire to the open fuse box. How about these new vehicles? Thanks in advance-Larry

P.S. Wonder is GM give some extra electrical points for this. (GPS's-CB's and etc)

77 ChevySport

12-12-2016 03:14 PM

Re: Where to tie in on a good electrical point (underdash) for newer Chevy P/U?

Between my owners manual (2014 Silverado) and the internet I have found the proper fuse
in the front side panel fuse box. (By drivers door) I will use CarQuest#ST231 fuse taps to tie
into the fuse. Hope it works. Thanks. Larry:chevy:

All times are GMT -4. The time now is 08:50 AM.