The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   removing expanding foam (https://67-72chevytrucks.com/vboard/showthread.php?t=102307)

Faster_than_you 04-29-2004 06:19 PM

removing expanding foam
 
Hey well I seen the other day that alot of people had expanding foam in there trucks. my father put it in the bottom of the doors and, all over basically. I asked him why he did that he replied,"oh it is for insulation."
well I dont like it in there, so I was wondering if you all had a little secret as to removing it. I know a big drill and knife works well, but something else?
thanks,
chris

beautimus 04-29-2004 07:44 PM

have yopu tried gasoline?
i know that gas eats white styrofoam. you might try a test to see if it works on the expanding stuff, just be careful.
try it outside, away from everything and keep a fire extinguisher near by.

Faster_than_you 04-29-2004 07:48 PM

well thank god I quite smoking 2 months ago!
that is a good point, thanks for the advise.

bisquik65 04-29-2004 07:54 PM

foam removal
 
p.b.blaster penitrating oil in a spray can with eat this junk.Any parts storewill have this.

FRENCHBLUE72 04-29-2004 10:33 PM

I used a knife to remove mine it's a lot of work but it did the trick!!!!

71Chevy4-speed 04-29-2004 11:12 PM

LOL don't try gas if your gonna smoke or have sparks. Cheap way to make napalm is styrofoam and gas so becareful. It gels the styrofoam so it sticks.

bigskiohio 04-30-2004 01:32 PM

try pb blaster bet that will do it, okay not bet ,i think it will do it.


All times are GMT -4. The time now is 02:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com