![]() |
Parts For Sale Dfw Area 4/5/2004
I have the following parts for sale in the Dallas, TX area:
Shipping is additional except where noted: 1. 1 Repro dome lens new in package - $5.50 (Delivered) 2. Pair of NOS Amber standard Fender Parking Lenses - $10.00 3. 1 NOS 69-70 In-Grill Parking Light Lens - $5.00 (sold) 4. After market under dash A/C unit has heat and air. Looks like a vintage air unit. Was working when pulled and has been sealed with tape since. This in the underdash unit only. $75.00 5. Pair of doors that are solid. Have speaker holes and minor dents - $100.00 6. Used but good A/C compressor W/Clutch (long type for our trucks) - $30.00 7. BBC Alternator Brackets - $10.00 (SOLD) 8. Pair of used 69-70 parking light assys - $10.00 9. Set of Seville Rear disc Brake brackets w/dust shields (can be modified for use on 12 Bolt axles - $20.00 (Sold) 10. Set of 5 Lug 71 model axles - $40.00 (Sold) 11. Set of Rocket wide turbine aluminum wheels 5 lug (uni-lug) pattern 8.5 X 15 - $100.00 12. SWB Steel Bed floors (3) your choice - $75.00 13. 69-72 Driver's side fender - $40.00 straight. 14. 69-72 Passenger side fender - $25.00 (Some bondo and rust on bottom front) otherwise fender is straight. 15. SBC fan shroud - $40.00 Nice. Like new. (Sold) 16. Cab w/doors - $300.00 - Cab and doors have been completely sand blasted revealing very little rust. The doors have some bondo revealed from the blasting but are smooth, not dented, and have no speaker holes and very little rust. These will not need much work. The cab needs rockers and some work on the passenger side cab corner. Floors are very solid. If you are seriously interested I will take some pictures of any area of the cab or doors that you wish to see. I can store the cab until it can be picked up. Also, have the title and vin plate for this cab which can be included for an additional $50.00. 17. One Piece SWB drive shaft w/T350/3 Speed yoke - $50.00 18. Idiot lite dash - $15.00 19. Deluxe non-tach Dash - $20.00 20. Standard in-cab Gas tank w/drain plug - $40.00 No rust. 21. Set of black armrests - $18.00 - GM used no cracks or tears. 22. Set of black sun visors - $20.00 - GM used not tears. 23. Inside rear view mirror and mount - $10.00 24. Good in-tank sending unit - $10.00 25. Power steering gear - $35.00 26. Pair of good red 68-71 armrests - $18.00 - GM used no cracks or tears. 27. Pair of good steel inner door panels - $25.00 28. Extremely nice 69-72 front clip - $275.00 - No rust or dings on the fenders and hood. All parts on it, core support, battery box, inner fenders etc... are useable. This is just a few things that I had lying around. Thanks for looking. Ernie __________________ 71 Deluxe Custom 10 BBC 402/T400 __________________ |
I'll take the sun visors, and the rear view mirror.
I'm in the Dallas area also, and could pick up. Please email me at n737nc@yahoo.com and let me know how to contact you. Thanks, Nick |
Reply to n737nc
Hi Nick,
Sent you an email. Ernie |
To The Top - Great Parts!
To The Top - Great Parts!
|
do you have any pics?
what year are the sleet inner door panels for? do you have a glove box? not the door, the actual box? |
A/c
Hi Ernie, do you happen to have any pics of the under dash A/C unit?
Thanks. |
Reply to toddtheodd and chevy_fatman
Please send me your email addresses and I will get you some pics. The door panels are from a 70 truck but will fit 67-71. I do not have a glove box.
Thanks, Ernie |
PM sent Ernie :)
|
smonty sent you a pm.
|
Reply to UP GRADE
Sent you an email w/pics.
Ernie |
what year on the inside mirror and bracket? how about condition?
|
Reply to 9footfan
Hello,
The mirror and bracket is from 69-72. They are in good useable condition. Not show but not all scratched up either. Ernie |
sent you a pm
|
Reply to Up Grade
Will get you a shipping cost when I get home from work today.
Ernie |
are the black arm rests for a '72?
LT |
Reply to LT 72 Jimmy
No, the armrests are for 68-71. Sorry, Ernie
|
I will be in the DFW area Friday and Saturday (June 11&12). I would stop by and look at your front clip if you are going to be around. pm directions and phone # if it works out for you.
|
what kind of shape is the ac comp in. can I use 134 with it.
|
Reply to flip66
The compressor is for R12 only.
|
hey , need the 5-lug axles and fan shroud,still got it?
|
Reply to nightrider
Hello Eric,
I stll have the axles and shroud. I will consider them sold. The fan shroud looks like new. Ernie |
I was also interested in the underdash AC unit. Can you send me pics to unlimitedlandscape@hotmail.com
What else would I need to make this fuctional? Thanks |
Reply to FirstGen
Sent you some pictures.
Ernie |
looks great Ernie, do you know what else would be required to make this work? If you do I would be interested.
Is this an aftermarket unit or what? Thanks |
send me pics of the fender thanks with shipping to 81303
|
All times are GMT -4. The time now is 05:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com