f/s 68 c10 lwb
 

FOR SALE!

1968 Chevy C10

250 I6 (runs great!)
- new starter (replaced 6-21-4)
- new cap, rotor, wires, points condencer (jan 04)
- new oil pan and timiing gasket (dec 03)
- uses NO oil. one of the side plates blows out oil at 2000+ rpm
- new alt and vlt reg (feb 03)
3 on tree
- tight shifting
- good clutch
- new ujoints 3 months ago
- new carrier 2 mths ago
Wood bed
- no wood (but has fullsize bed liner.

Need the normal rust fixed.

Just turned 270K miles

Has 70, 80's rallies 6 lug 15x8 rims w/ Gdyr wing foot 295/75/15 (i might be wrong) w/ about 1/2 tread all the way around.

Coil sprng rear.

I was hit in Jan of 03 and have all of the parts to fix the damaged parts (hood, gril, grill valance, pass fender, and rad support, and hood hinge) that's all that was damaged and again I HAVE THE PARTS.

I've had a lot of looks and "ohhh, i'd like to have that" but none committed to buy it. You are the guys i'm looking for! Help me get this thing sold :whine: so i can put the engine and tranny in the other 68 and get her rolling as she is my new project.

I'm asking $500 obo

Thanks guys Pics will be up tomarrow (6-23-4) by 1130!!!!!

email me w/ questions or a request to call whitesswj@squaredc.net

'68
 

Possibly interested. Waiting for pix.......Zoomy

zoomy, i'm having problems w/ the uploading of the pics. let me email them to you so you can get them in the full size.

sswj whitesswj@squaredc.net

Pm
 

PM sent with my e-mail address.........Thanks

email sent sswj

trying to get some pics up guys, it's just when i try to upload them they tell me ther're too big so i try to downsize them but i think they're way to small for good viewing.

get back w/ them later! sswj

what's up guys, why no interest? TTT

interested
 

I'm interested. Never received the pix. I'll PM my e-mail address again...........Zoomy

Whitesswj... if you want, send the pics to me at hawaiianj@mindspring.com and I'll re-size them and post them for you.

Okay, I dropped the ball here... I did get the pics and I'll post them right away..

Sorry.

Here's the first five pictues.

Here's the last four.

thanks alot, jay.

pics up lets geterdone!

git r DUUNN!
lol nice truck except for the black eye. wish it was closer :(

ttt

the hood in the back looks like a 69-72 hood. i could be wrong but oh well.

your preception is correct, highboy.
Sorry that i didn't mention that before.
It's all i could get at the time.
With all of the guys in here wanting that style of hood or others that just have 67-8 hoods laying around, i'm sure that the buyer can get the correct hood with no problem.
thanks again, sswj

this thing needs to get sold, i can't believe that you guys would want this. it's a steal!!!

500, runs, is in decent condition?

Whats up? where's the interest.

It's in the Memphis Metroplex I need to sell this thing so i can get the CE68 up and running!

sswj

If I only had the $500+gas and a ride up there. But alas I don't, and the woman would kill me if I bought another.
If you still have it when I have the money we'll see what we can do, okay? ;)

edit;
quick question, I've never worked on a straight six before. "one of the side plates blows out oil at 2000+ rpm" What is a side plate? How bad does it "blow oil"???

How come all of the cheap projects are in (ok, near...) Tennessee... :whine:

theodd said: "If I only had the $500+gas and a ride up there. But alas I don't, and the woman would kill me if I bought another.
If you still have it when I have the money we'll see what we can do, okay?

edit;
quick question, I've never worked on a straight six before. "one of the side plates blows out oil at 2000+ rpm" What is a side plate? How bad does it "blow oil"???"

reply: The side plates are on the passenger side of the Motor underneath the sparkplugs and above the cam. IF you remove them you would gain access to the Hydrolic lifters. there is a gasket on the plates. I dont' seem to have a problem when i run in or around town, it's when i run on a longdidstance trip and have to keep it above 60 or 2200. i would say it uses 3 quarts a month maybe.


Chris said: "How come all of the cheap projects are in (ok, near...) Tennessee... "

Reply: what part of iowa do you live in. I have some family in Hannibal MO which is just south of the MO IA line. Let's see if we can see what to do?
sswj

so it's just a gasket that needs to be replaced?
also, I didn't see any mention of the bumper in the list of replacement parts.
I think I may have found a ride, now I just need the $500, and a way to hide it from the lady of the house. :banghead:

sorry todd i sold it today here to a local guy.
He plans on fixing it up himself for himslef but if his 15 yearold (will be 16 on the 16th of July) wants it he can buy it off of his father.


SOLD SOLD SOLD

I HEAR YA CRISK10, I HAVE TRIED TO SELL 3 PROJECTS RELATIVLY CHEAP
IN THE LAST 2 YEARS & ONLY MANAGED TO SELL ONE AFTER CUTTIN MY
PRICE DOWN SO MANY TIMES THAT I LOST MY ASS ON THE DEAL. :confused: