The 1947 - Present Chevrolet & GMC Truck Message Board Network

I had this for sale a few weeks ago but never put any effort towards selling it. I need to clear my garage out to sell my house and so this needs to go.

327 longblock
all valve train parts and bolts
chrome valve covers
stock 4bbl intake
holley carb (needs a accel pump to work)
all acessories and brackets
rams horn exhaust manifolds and y pipe
new electronic dizzy
plugs (have misc wires but would recomend buying a new set)

TH-350 trans
kickdown cable
torque converter
tail shaft
trans lines to radiator

I am selling a 1968 327 with new rebuilt heads (never ran). I bought the motor in the truck and never ran it. Previous owner said it was completly rebuilt long block but that he rebuilt the shortblock and had the heads done somewhere else. When I pulled the heads to take a look the pistons had no build up so I can assume that they are new. Other than that, I don't know anything about this motor. All cyclinder walls looked fine with no pitting or scaring of anykind, although I did not see much of a cross hatch.

The truck was a daily driver before the previous owner began the motor rebuild process so the tranny should drive however I cannot guarentee anything. These are cheap and easily rebuilt and I can recommend a professional that is a friend of mine to do the work on the side of a tranny shop he works for. Will also include a hurst cable operated shifter for another $35.

Price is pretty firm at $500. This is a steal. But bring cash/trades and lets deal.

email: unlimitedlandscape@hotmail.com
Taylor Sims
972-530-1355