350, TH400, 6.15 dually eaton rear $100 take the rest for free! (WI)
 

Hey guys, I won a pair of trucks on ebay, went out and got the one I wanted badly (the '67) and pulled a few parts off of the '75 that I needed. Now I don't want to go back to get the '75 cause it will cost me more in gas and time so that at best I will break even. Truck is located in Janesville Wisconsin (about 30 mins from madison off of I90). I want $100 OBO but I might be convinced to trade for parts if anyone has something I want (PM me if you want to trade with what you have)

'75 Chevy C30 2WD
350, not locked up, ran when parked, no dist or carb (I took em), 4bbl gm intake
TH400, also worked when parked
Eaton rear end (not sure what model) has 6.15 or some ridiculously high ratio in it.
All glass good except for passenger window

i would love to have that but dont know how i would get it to western PA :(

The '75 should have a 14 bolt under it, and the lowest gears for those are 5.13. Hope this helped...maybe?

Truck has 6.15 rear gears according to the sticker in the glove compartment. I'll take $75, I just need to get the truck gone from where its sitting in janesville. The doors do look alright on it, might be good driver quality and the frame also should be good, the cab needs rockers and corners at least maybe more.

Only picture of this truck I have:

why you partin out the 67? is a pretty rare truck you should fix it up

Cab is completely trash :( Floors are rotten or gone all the way from the rockers up past the cab supports and the rear of the cab is almost completely rotted off in front of the gas tank. I do have another 1-ton dually (a '68) with a nice cab I'm getting and keeping, probably going to throw it on the half ton frame I have now for my '72 (which also has a trashed cab). This week I'm getting more parts to complete my northstar from a friend (another bottom end, starter, intake, injectors, engine harness).