The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Lets try this again, '75 C30, 350, TH400, 14 bolt rear $75 Janesville WI (https://67-72chevytrucks.com/vboard/showthread.php?t=111701)

botboy 07-14-2004 12:42 PM

Lets try this again, '75 C30, 350, TH400, 14 bolt rear $75 Janesville WI
 
Hey guys, I won a pair of trucks on ebay, went out and got the one I wanted badly (the '67) and pulled a few parts off of the '75 that I needed. Now I don't want to go back to get the '75 cause it will cost me more in gas and time so that at best I will break even. Truck is located in Janesville Wisconsin (about 30 mins from madison off of I90). I want $75 OBO but I might be convinced to trade for parts if anyone has something I want (PM me if you want to trade with what you have)

'75 Chevy C30 2WD
350, not locked up, ran when parked, no dist or carb (I took em), 4bbl gm intake
TH400, also worked when parked
Eaton rear end (not sure what model) has 6.15 or some ridiculously high ratio in it.
All glass good except for passenger window
Body is saveable but rusty, doors are descent driver condition.

70ChevyLongbed 07-14-2004 01:06 PM

I want that motor... but it's too far for me :(

botboy 07-15-2004 12:17 AM

TTT. I'll take $60.

botboy 07-16-2004 09:34 AM

Fifty bucks. Somebody's gotta take this thing.

ZOOMY 07-16-2004 05:18 PM

350/400
 
Did the 350 run before you cannibalized it ? What about the trans ? I'm about 60 miles from there............Zoomy

dtlilly 07-17-2004 12:54 AM

Does the truck have the factory 16" white rims? I also am fairly close. Thanks, Don

botboy 07-19-2004 12:33 PM

Truck ran when parked about a year and a half ago as I understand it. Will not run now unless the cannibalized parts are replaced - will also need a battery and coolant line. Seller told me trans was in good shape, driveshaft was disconnected when I looked at it ???? don't know why. Truck looked like it had the factory rims, I don't remember if they were white or not but I do remember that they will probably need to be blasted and painted.

botboy 07-20-2004 12:15 PM

ttt

botboy 07-21-2004 09:37 AM

ttt

rin68 07-21-2004 01:13 PM

are you confident that it will run, and how far could it be driven once it's running. i'm interested.

botboy 07-21-2004 02:33 PM

Quote:

Originally Posted by rin68
are you confident that it will run, and how far could it be driven once it's running. i'm interested.

Its been sitting for 2 years but I'm sure with a carb, dist and some starting fluid it could be running. However it isn't driveable, it doesn't have rear lights, one window is broken, rear driveshaft is disconnected, prolly has old gas in the saddle tanks and I'm unsure of the brake condition. I could haul it for you if you would like but I need about $180 in gas to get it back to minnesota from where its sitting.

rin68 07-21-2004 11:17 PM

sorry, i'd need to it driveable to fit my situation. thanks for the quick reply

Beefcake 07-22-2004 08:32 AM

Im sending you a pm.

botboy 07-22-2004 12:12 PM

PM responded to


All times are GMT -4. The time now is 04:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com