The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   speakers for the 72? (https://67-72chevytrucks.com/vboard/showthread.php?t=113247)

125 07-25-2004 11:37 PM

speakers for the 72?
 
the speakers in my truck are old and junk, and i need new ones, i was thinking of getting some off ebay, some 5 1/4 2 ways or something like that will do

i guess i would need an amp since the head unit is only putting out like 20 RMS watts....how would this work?...50x4 cd player - amp W? - speakers, would i get a 200wx2 amp or somewhere around there?

also does anyone know if speakers are measured by their outside diameter (the cover) or the actual woofer.....i just pulled one out of the truck and the outside is 5 1/4 but the mid woofer is only about 4 inches and i cant fit any bigger than the ones i pulled, unless i take them out of the kick panels and go to 6x9's and stick them in the doors (ill need to get a new drivers door before i put speakers in the doors or if i do....its rusted out on the hinge and keyhole)

6x9's
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5711253357

5 1/4's
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5710554381

125 07-26-2004 04:01 AM

asdf

jlive68 07-26-2004 04:40 AM

radio
 
If it was me I would get the boxes for the 6X9's and put them under the seat. If you still have a bench seat you can build boxes and put 10's in there and go with the 6X's. The only thing is you need to know the watt's the speakers will hold before putting in amps and all. The head unit my put out enough power for what you want. It just depends on how loud you want the system. :flag: :flag:

James

125 07-26-2004 06:56 AM

so how about this AMP

and these 6x9's

amp is 2x200w rms and the speakers are 200w rms also...would this work?

jlive68 07-26-2004 04:05 PM

amp
 
They will work. Should not be a problem were are you going to put them.
:flag: :flag:

James


All times are GMT -4. The time now is 06:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com