The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 700r4 install (https://67-72chevytrucks.com/vboard/showthread.php?t=113305)

71chevylongbed

07-26-2004 02:27 PM

700r4 install

what parts are needed and what is the total cost to replace a TH350 with a 700r4

busterwivell

07-26-2004 06:44 PM

What length is the tail shaft on your TH350?

krue	07-26-2004 11:29 PM

If you have a short shaft (6") TH 350 the 200-4r would be an easier and cheaper way to go, from the research I have done. The lengths are the same, the linkages work and you can use the same driveshaft. Cdowns has done the swap and would probably be able to fill you in on it.

busterwivell

07-26-2004 11:47 PM

If you have the 9 inch tail, your driveshaft will work with a 700.

All times are GMT -4. The time now is 08:05 AM.