The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   4speed manual - Overdrive! (https://67-72chevytrucks.com/vboard/showthread.php?t=114147)

stickshift_or_walk 08-02-2004 06:05 PM

4speed manual - Overdrive!
 
Back in '84, I ordered a C10 with a V8 and a four speed manual that had an overdrive 4th gear. Long story made short, but that tranny was the only thing that worked well in that truck (I think it was assembled early on Monday! :o ).

Does anyone have one of these, or know where there might be one? Pretty sure it was a Saginaw.

Thanks...SSOW :bowtie:

1969 GMC 08-02-2004 11:34 PM

that would be the NP-A833. hard to find, but I thought I'd make it easier for others if they knew what it was. ttt for you

stickshift_or_walk 08-03-2004 12:09 AM

Thanks, 1969 GMC,

Should have known one of the regular gang would have the answer. So it's a New Process, not a Saginaw. I've slept since then...

Any idea how the length might compare to the Saginaw 3 spd?

SSOW :bowtie:

muddyole 69 08-03-2004 08:51 AM

Np A833
 
How does the shifter mount ? Internal rail or side mount with external rail ?

stickshift_or_walk 08-03-2004 10:11 AM

I believe it's a side mount, based on the location of the floor shifter. Had a beefy chrome shift lever, too. Really sweet factory setup.

SSOW :bowtie:


All times are GMT -4. The time now is 03:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com