The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Changing Driven Gear (https://67-72chevytrucks.com/vboard/showthread.php?t=118202)

skokie

09-02-2004 07:43 PM

Changing Driven Gear

How do you change out a driven gear for a 400 turbo?

Thanks

Tx Firefighter

09-02-2004 08:05 PM

1 Attachment(s)

Unscrew the speedo cable off the trans. Next, you remove the one bolt that holds the gear housing in and pull the housing. The driven gear just slides into the housing after you revove it.

I attached a picture of my turbo 400 so you can see the housing and bolt that holds it in.

Tx Firefighter

09-02-2004 08:06 PM

PS Brad, you have UPS package on the way.

skokie

09-02-2004 08:20 PM

Thanks Tx Firefighter. Isnt there another gear in there as well that may need to be swapped out?

All times are GMT -4. The time now is 10:41 AM.