The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Vin# other then on door plate? (https://67-72chevytrucks.com/vboard/showthread.php?t=119794)

70blazer 09-14-2004 07:27 PM

Vin# other then on door plate?
 
I have a 1967 c10 that had the door Vin # plate removed. Is there any other place on the truck that I can find the Vin# or any other identifying #'s? I would like to apply for a title and need to have that #.

Robert1970C20rstbukt 09-14-2004 07:38 PM

If it has the original drivers door there should be a sticker on it right above the latch. And I also heard that it's stamped on the front frame rail somewhere.

Blue68 09-14-2004 07:38 PM

Top of driver's side frame rail between the suspension and steering box.

Rod 09-14-2004 09:46 PM

67's were known for not having vins stamped on the frames on many occassions.

70blazer 09-14-2004 10:42 PM

Thanks guys. I will check it all out.

landon4421 09-14-2004 10:59 PM

engine compartment, driverside frame rail, about 5-6 inches from the motor mount bolts. twords the front of the truck. Also under the cab on the driverside frame rail. Right about in the middle of the cab ! :bowtie:

Blue Beard 09-15-2004 07:49 AM

Did all the 69-72's have the vin in that location...?

Some of the older cars had them on the driver's side frame rail just in front of the rear wheel.

Rod 09-15-2004 08:31 PM

1 Attachment(s)
Basically part of the total vin is stamped in the region being pointed at or further up the frame towards the cab...but like I said a 67 may not be stamped.

Longhorn Man 09-15-2004 09:02 PM

I'm glad someone else used my pic.
(I really need to make a disc of all my pics off my puter)

Rod 09-15-2004 09:24 PM

I try to remember to put the person who took the time to post a pic some credit.... sometimes I forget who takes them..... believe me I have saved lots of pics. I did credit two others so far tonight in other posts i put pics in.

Longhorn Man 09-15-2004 11:02 PM

I don't worry about that stuff...just like knowing that my pic is going to good use. Most of the info pics I post weren't taken by me either. :metal: :metal: :metal:


All times are GMT -4. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com