|
SB power steering brackets
3 Attachment(s)
i have a P/S pump off of an 86ish PU with all of the A/C brackets, when putting in my motor i made some brackets that would hold it in place and be somewhat adjustable, well now its time to do it the right way. the question i have is if i unbolt the current bracket will this new bracket bolt up??? pic 1 and 2 are of my pump and pic 3 is of the bracket. thanks for the help (and of course it is the last bracket ont the page)
http://www.srbymichael.com/manufactu...e_sbclwp.shtml |
looks like you are using a long water pump. i think for the bracket you want to use you need a short pump. that means new pump,and pullies. :confused:
|
a new water pump or a new P/S pump??? there is only one bracket on that page and it says it is for a long water pump. help anyone
|
ttt before bed time
|
what year are you working on?
|
the truck is a 68, the motor is a 73, and the P/S box and pump are 86ish
|
| All times are GMT -4. The time now is 04:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com