The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Spot Weld Removal. (https://67-72chevytrucks.com/vboard/showthread.php?t=122615)

skokie

10-08-2004 01:15 PM

Spot Weld Removal.

What kind of drill bit would be needed to remove a spot weld from a rocker panel?

Thanks

gonebad2

10-08-2004 01:28 PM

They make a tool for that. It's called a spotweld remover. It has a pilot drill bit that is in the center of a larger cutter. Visit your local auto paint supply store. That's where I bought mine. Get one and you will never want to use a regular drill bit for the job ever again.

chickenwing

10-08-2004 01:29 PM

Easwood has some nice spotweld removal bits. http://www.eastwood.com/shopping/sea...yword=spotweld

skokie

10-08-2004 01:35 PM

What size would I need for a rocker panel removal? 3/8?

Alexis

10-08-2004 02:08 PM

3/8 drill bit and the Drill Doctor :metal: I'm pretty sure it 3/8.

All times are GMT -4. The time now is 10:13 PM.