The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   wtb 73-87 lwb 4x4 rolling frame (https://67-72chevytrucks.com/vboard/showthread.php?t=122658)

griswold510 10-08-2004 07:21 PM

wtb 73-87 lwb 4x4 rolling frame
 
looking to buy a 73-87 lwb 4x4 frame in or around GA. im planning on converting my c10 into a 4x4.

clarkjw24 10-08-2004 10:22 PM

May have one in a couple of weeks. What all are you gonna need on the frame? I'm in SC

griswold510 10-08-2004 11:00 PM

well ive got a 76 c10 right now. good cab, engine, etc. basically all ill need are the 4x4 components. everything else ill strip from my c10. how much would you be selling for? also how far from atl are you?

clarkjw24 10-08-2004 11:16 PM

So your talking, frame, springs/alxes/tires/rims, trans/tcase, both drive shafts, and steering box.

Hopefully by next weekend I will have it here at the house. I'm buying it for the f/i wiring harness but its a complete 87 lwb 4wd truck. I was going to part the rest out however would rather get rid of the whole thing. Let me get it here and make sure that everything works right on it and I'll get back with you. I like to stand behind everything I sell. Then we can talk price. Also it less than 5 hours to Atl. Up I20 to Camden,SC then 30 mins away. I could deliver for a small fee of couse. :D

griswold510 10-08-2004 11:30 PM

alright sounds good. how much you paying for the whole thing? trying to guage how much im gonna be spending in the next couple weeks.

griswold510 10-10-2004 06:05 PM

anyone else around got anything to help me out??

mkundo 10-10-2004 07:37 PM

Chassie
 
I'm in Ca. I have a complete front (D44)and rear (12 bolt)with springs and drive shafts. $250.00 for all.
Thanks

griswold510 10-10-2004 07:43 PM

damn....wish ya werent so far away

bisquik65 10-10-2004 08:18 PM

rears
 
Just parted a 79 lwb 4x4 I have both rears Dana44 up front and 12 bolt rear havenot checked ratio yet but will ,both driveshafts for $200. And 4 stock steel wheels The frame was not real bad and i should have check on here 1st but i didn't and its on my truck along with 2 more frames for scrap. I am in western n.c. 1 hour north of asheville. Pm me . Erick

griswold510 10-16-2004 04:48 AM

ttt

clarkjw24 10-17-2004 11:30 AM

Got mine home everthing seems good. Its an 87 4wd lwb rolling chassis with a 700r4/np208 combo. Both driveshafts, set of 10 bolts (3.08) good steering box, set of rallies minus rings and caps. $750 you come get it. I've got lots of 4wd parts so ask for anything else you may need. Like I said before I can also deliver it for a fee. Let me know if your interested. :flag:

clarkjw24 10-18-2004 10:54 AM

???

clarkjw24 10-19-2004 08:55 PM

Keeping it at the top.

If your not interested just let me know. I've got several people in line behind you. I told them you had first dibs. :D

griswold510 10-22-2004 12:56 AM

i dont have the 750 right now... just looking for something a lil cheaper i guess thtas more bare bones cuz i got a good body and all. but thanks for all your help though


All times are GMT -4. The time now is 05:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com