The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Just won a set of 02 Silverado Bucket seats ebay.. (https://67-72chevytrucks.com/vboard/showthread.php?t=123486)

Jimbotronics 10-13-2004 10:54 PM

Just won a set of 02 Silverado Bucket seats ebay..
 
They're not exactly what I was looking for but for $270 bucks I can live them 'em. The center doesn't fold, I'm hoping it can be fabricated to where it will. I ask about how far the seats would recline, the owner sent me a photo of the seat reclined and i was like DAMN is that the same seat? It looks much nicer than the auction photo - she said I know the auction photo does them no justice.. Cool part is they're only an hour and half drive to go get, don't hafta ship.

I know there's been people that have used these, can anyone tell me how much the seat brackets will need to be modified?

Auction Photo
http://www.imagestation.com/picture/...2/f6a6740a.jpg

up close out of the sun photo
http://www.imagestation.com/picture/...1/f6a672e4.jpg

70short 10-14-2004 03:01 AM

Maybe I am missing something It has been A long day. But if you are putting those into your 71 truck. Then who cares how far they recline?

vtblazer 10-14-2004 03:11 AM

Recline
 
Quote:

Originally Posted by 70short
Maybe I am missing something It has been A long day. But if you are putting those into your 71 truck. Then who cares how far they recline?

If their going into a truck they "won't" recline, there's no room for it. :rolleyes: They'll lay right up against the gas tank. (if yours is still in)

Inthuwind 10-14-2004 05:39 AM

Nice seats!!!!!!!!!!!!!
 
Hey, nice score on the seats. Those are the type I'm looking at as well. I'll look thru an issue of Classic Trucks. There is an article on installing all types of seats in our trucks. I don't think you'll have a problem, maybe over the hump. NICE SEATS MAN!!!! And, oh yeah...It'll recline a little without the tank behind you. ;)

Inthuwind 10-14-2004 05:46 AM

Yeah--look in Classic Trucks August 2004 edition. It says that the center console bracket would have to be trimmed a little on those seats. But, overall, the seats are very comfortable among all they tested. ~~~~~page 80.

Jimbotronics 10-14-2004 06:02 AM

lol - ya eventually I hope to relocate the tank. I guess mostly I was just wanting additional photos.

Inthuwind - I have that article, another board member forwarded it to me. So I'll be going back and readig it again.

btw: where are you stationed? I'm civil service at Patrick and also still do reserves there.

Inthuwind 10-14-2004 06:34 AM

I'm stationed in Korea until March 05 then off to Pope,NC. I was just home for midtour there in Lake City Fl. to tear down my '68 shortstep. Can't wait to get back to the states and start on it again!!! Any chance on changing my orders to Patrick????????? Here's a link to see my truck if you want. http://community.webshots.com/user/inthuwind

Jimbotronics 10-14-2004 07:07 AM

Osan or Kunsan? I was at the Kun from november 95 till nov 96 - I worked in the central office telephone switch. That's what I want is a swb stepside - seems to be pretty clean. I bought mine from a guy out of Lagrange GA. Lake City was the halfway mark that we met at. The cop shop and CE are pretty much all that's active duty here now, most everything else is civil service. Let me know if you need anything over there.

Inthuwind 10-14-2004 07:32 AM

in Korea
 
I'm at Osan. I'm in C.E./Utilities~~I've been in 12.5 years so far. Not too long now and I can retire :rolleyes: My family lives in Lake City. I was raised there until I joined the service in '92. Like I said, can't wait to get back to the states!!!!!! :flag:

Jimbotronics 10-14-2004 07:47 AM

A good portion of C.E. is still here, not sure if power is one of the sections or not though. '92 is when I went in, stayed active duty till end of '99. Definitely stay in a get the retirement, then go to work somewhere else and retire again.... lol.

Joe67 10-14-2004 07:50 AM

Nice seats - those look good in these trucks IMO :cool:

71swb4x4 10-14-2004 07:56 AM

I didn't modify the brackets at all on mine. I did have to drill all new holes in the floor though. Make sure you use large plates for washers so if you get into an accident the nuts don't pop through the floor.
Shawn

Inthuwind 10-14-2004 08:06 AM

Hey 71swb4X4~~have any pics with the seats in????

71swb4x4 10-14-2004 08:12 AM

I can get some pics tonight after work.

FuelCellGuy 10-14-2004 08:19 AM

I have them in my truck and once they are mounted, they will not recline at all. I don't have the tank behind the seat either. The only postives with these seats is 1.comfort, 2.adjustable forward only(good for the shorter folks). I am trying to get rid of mine. I like them but I really like the 88-94(?) bench better. Click the link for pics. Later, FCG

http://photobucket.com/albums/v35/Fu...FuelCellStuff/

TugOwar 10-14-2004 08:33 AM

FuelCellGuy, If I drive out to Mineola can I have the buckets? hehe j/k

5150 10-14-2004 08:46 AM

1 Attachment(s)
I just won these seats off of EBAY last week and the best part is I won them for $75. I don't know if he titled them wrong and I just came up on them or what. I'm in the Nashville area and the seats were in the Atlanta area. One of my dispatchers at the police dept. has a girlfriend in Atlanta and he goes and sees her every other weekend. So he went down in his S10 and picked them up. They have been in my garage since Monday morning. They're a little dirty, but no tears or rips. I think they will clean up nice. The only thing that I'll have to get in the plastic cover and handle on the driver's side. I can't wait until I get my truck back from NADC.

http://67-72chevytrucks.com/vboard/s....php3?t=122967

Bryan

Jimbotronics 10-14-2004 08:51 AM

nice truck FuelCellGuy!!! I knew they wouldn't recline in my truck, there's no where for them to recline. It just happened to be one of many questions that crossed my mind when I requested additional photos.

Jimbotronics 10-14-2004 08:56 AM

Excellent find, seem to be in good shape - cleaning 'em shouldn't be too difficult. Sharp truck - can't wait to see it when ya get it back.

ts71281 10-14-2004 09:01 AM

Fuel Cell Guy,

Does your center seat flip down to be an armrest on your silverado seats? If so I'm interested. Thanks!

Joe

FuelCellGuy 10-14-2004 10:15 AM

ts71281,
Unfortunately, they don't.

TugOwar,
Sure, if you had a nice 88-up dark grey bench seat to trade.

That offer applies to everyone here. Later, FCG


All times are GMT -4. The time now is 07:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com