81-87 Cowl Hood.
 

81-87 Glass Cowl Hood (Will also fit 88-91 Suburban/Blazer)
Not sure on the brand but it looks similair to the Harwood hoods.

Asking what I paid - $300.00
I would prefer local pickup in DFW but partial delivery may be arranged.

Other pics available.

Pic of hood installed. :D

Do you want to sell the truck?

For $3000 OBO you can have the truck less the compressor/12 gallon tank for the air bag system. I'll even install a 5 gallon tank to replace the 12 gallon and install an electric compressor to replace the engine driven compressor.

It has an ignition system short that I haven't had time to track down, that's why it has been driven.

Here's a list of modifications on the truck:

Suspension:

Front-

Air Ride Technologies Cool Ride kit
http://www.ridetech.com/productinfo/...s/ARF11800.jpg

3" DJM spindles
http://www.djmsuspension.com/Images/...Ds2045-3Sm.jpg

New pitman/idler arms

Rear-

Air Ride Technologies weld on parallel 4 link kit
http://www.ridetech.com/productinfo/images/ars14500.jpg

Bed cutout for step notch with a hinged notch cover and wheel tubs.
Frame from the cab back has been shot with a few coats of gloss black spray bomb.

4 way ART control panel
http://www.airride.com/productinfo/p.../CON4000-W.jpg
4 way ART ride pro valve setup
http://www.airride.com/productinfo/c...es/arv2500.jpg

Interior:

B&M Megashifter
http://static.summitracing.com/globa.../bmm-80690.jpg
92 Honda CRX seats( have a few tears in the fabric) Also have the bench seat.
Billet Empire motorsports column kit
http://www.trucknvans.com/shop/media/440.jpg
Billet Door lock knobs
http://www.trucknvans.com/shop/media/DL.jpg
98 Silverado rearview mirror
NPI Gray carpet not installed yet
Dash pad has one small crack
Tint installed 2 years ago. 5% on back window and 35% on side glass with a 5% windshield brow.

Engine:

305 8000 miles off rebuild
Edelbrock chrome valve covers, filter housing, valve cover breather.
K&N Filter
New alternator
New starter
New ignition module

TH350 8000 miles off rebuild
Stage 2 Transgo shift kit

Exterior:

Molded rear Custom Classic roll pan
Shaved drip rail holes
Glass cowl hood
T-Rex polished billet grill
http://www.trucknvans.com/shop/media/16015.jpg
New replacement headlight buckets
Cool blue low/high beam headlights

Wheels:
15x9 Polished Eagle Alloy 171

Tires:
275/60/15 BFG Radial TA with 65% tread left



The doors have some dents and the front right fender has a small one on the leading edge above the marker light. The left rear bed corner was bent in when I threw a belt on an old tire last year. The front left fender is straight as it was given to me as a replacement when I purchased the truck.

Only has passenger gas tank as driver was rusted out. Pulled that tank after I purchased the truck and was not told by previous owner. Air tank is in the spot where the driver tank used to reside.

Here are a few more pics with the old wheels/tires:

http://www.fullsizechevy.com/5-8CHEVY/the83.htm

Would you be willing to meet with someone? If so how far? I live in East texas near Tyler.

r u 58 on the fullsizechevy froum . pm me with your number . im about 45 min from u

Are you interested in the whole truck or just the hood? :)

PM sent. :)