The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   FS in SC 700R4/208 LWB 1/2 rolling chassis (https://67-72chevytrucks.com/vboard/showthread.php?t=126793)

clarkjw24 11-08-2004 04:12 PM

FS in SC 700R4/208 LWB 1/2 rolling chassis
 
I've got a 700R4/NP208 combo with drive shafts for a lwb 1/2. $450
Also the complete rolling chassis for this 87 truck. 10 bolts/3.08s, includes the wiring to the tail lights, steering box, swaybar, axles, springs, 3" blocks front/rear?, roller tires on ralleys/no caps or rings. $300
I bought this truck for the TBI, drove it on the trailer and brought it home. The 4wd worked fine. Also have the 350 but it needs rebuilding, smoked like crazy. I can leave whats left of the body on it or can remove if not wanted. Delivery is possible to surrounding states. Would rather sell all of it at once so offers welcome. I need to sell soon b/c I borrowed some of the money to buy this thing.
The cab has a good sliding back glass and decent trim and seat. Interior is blue. The bed is beat up pretty bad and the tailgate is dented.

bisquik65 11-08-2004 07:33 PM

pics?
 
Can you get some pics? Erick

clarkjw24 11-08-2004 09:03 PM

I'll get sum pics in the morning.

griswold510 11-08-2004 09:56 PM

im interested clark.

clarkjw24 11-09-2004 01:42 PM

Here a few pics.

griswold510 11-09-2004 02:37 PM

so how much for basically everything there but cab, bed and engine?

clarkjw24 11-09-2004 02:42 PM

$650 you come and get it. I'll remove the bed,cab,clip and motor.

clarkjw24 11-15-2004 11:02 AM

:devil: :devil: ttt :burnout: :burnout:

clarkjw24 11-17-2004 10:13 PM

I'll part anything off of this truck you want minus the tbi and wiring.

ElGracho 11-17-2004 11:28 PM

I'm interested in the two fuel tank sending units.

Gunny 11-23-2004 03:47 PM

Just wanted to pass on that I met John last week when I picked up a transfer case I bought from him.

He is Top Notch, gives a heck of a deal and seems to go out of his way to be helpful.

THANKS JOHN for helping me get my burban on the road.
Gunny

guyryan100 12-08-2004 10:38 PM

Still sitting on that power steering gear box? Need the pitman arm too...

clarkjw24 12-09-2004 01:45 PM

Quote:

Originally Posted by guyryan100
Still sitting on that power steering gear box? Need the pitman arm too...

??? I'm sorry was I susposed to send you some parts?

guyryan100 12-09-2004 08:22 PM

Quote:

??? I'm sorry was I susposed to send you some parts?
No, no. Sorry - that was my way of asking if you still had the power steering gear and box....

clarkjw24 12-09-2004 09:21 PM

Quote:

Originally Posted by guyryan100
No, no. Sorry - that was my way of asking if you still had the power steering gear and box....

Ohh. Yeah I've got all of that.
So your asking about:

1. the power steering pump/canister/pully
or
2. the steering/gear box with the pitman arm (I'm betting this one)

Shoot me an offer and I'm sure I can get them out to you. :flag:

clarkjw24 12-20-2004 02:41 PM

Still alot of truck left. Parts anyone? Good tranny and tcase. Straight frame. Matching axles. Drive shafts. Drivers side gas tank. Tailgate parts.


All times are GMT -4. The time now is 03:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com