350 bare block, misc. parts / DFW
 

I have a bare 350 four bolt block forsale. It's a 010 stock bore with all the main caps in tact. The engine when pulled was running and codes to a '74 Chevy truck. I stripped it down to build a 383 until I came across a running engine I couldn't pass up. I'm asking $150 obo. No Shipping, but may be able to help deliver within a reasonable distance.

Original snorkle air cleaner assembly from a '70 Chevy includes spacer, aircleaner, stove pipe and bracketry for the exhaust manifold. $40

Solid rear glass from a '70 Chevy, no cracks or scratches, has tint that is less than a year old. $40 obo, no shipping.

Thanks,

Ryan

I'm interested in the block. and will be coming to ft.worth over christmas..I'll let you know for sure in about six days(Stuff selling on ebay) if i can buy it or not. If you sell it before then, well it's my loss

Ok, let me know what comes up.

Thanks

I'll be adding a few more parts as I stumble across them.

Just added, a two piece driveshaft for a 2wd lwb. $40 obo

5 blade clutch style fan, no clutch. $20

You said bare block. I'm taking this to mean no crank or pistons. Am I correct?

Yes, it's bare with only the main caps. I do however have access to the stock crank/rods/pistons that came out of it.

Was it in need of an overbore? How did the cylinder walls look?
Do you have any pictures?
This may be the cheaper route for me... will have to convince the g/f of that though :banghead:.

The cylinders are pretty clean. I'll get you some pics this evening. You might be able to get away with a good hone.

I also have a set of Hypertectic KB 350 .010 pistons for sale. They were going to be part of the 383 build. $50

Purs, your PM box is full. ;)

fixed, sorry.