how low should i go?
 

I thinking about doing a 4-5 inch :metal: drop on my truck any ideas?

4/6
:metal:

I run 4.5/6 drops on my 1/2 ton trucks. You can drive one everyday, pretty much anywhere there is pavement, without worry.

reply
 

4-5 should be enought to go over speed bumps anything more than that ud run into problems on tall speed bumps.

how is the best (CHEAPEST) way to get the 4/5, 4.5/6 or 4/6?

If you have a 73-87, like your signature says, then what I would reccomend, is getting the Summit 2½" Spindles ($225) and 2" drop springs ($90), then get the DJM Rear Flip Kit ($90). That'll give you quality parts, quality ride, and cheap price. :)

thanks for the idea :metal:

Stop when it hits the ground :metal:

Then drag it till the rockers fall off.. :devil:

will this:
2" drop springs ($90), then get the DJM Rear Flip Kit ($90)
just give me a 2/5 drop?

reply
 

look at stylinconcepts.com
good cheap lowering kits and quality products, on my lowered 67 thats what i used a 5-7 drop on it, and on my other 83 with a 5-6 drop i have a belltech lowering kit, great kti, but dont forget shocks.